• Applied Microscopy
• /
• v.40 no.4
• /
• pp.245-251
• /
• 2010

In this study, we applied 15% glycolic acid peeling agent and 30% glycolic acid peeling agent to the dorsal skin of mice and analyzed the oil content, moisture content, and pH value of the skin before and after test using cutometer. Ultrastructure for changes in the epidermis of mice were observed under a dermoscope and a scanning electron microscope before and after test. When using 15% glycolic acid peeling agent, the changes of moisture content was measured 74.67 AU for the normal control group and 70.21 AU for the experimental group, the oil content was 13.49 mg/$cm^2$ for the normal control group before test and 8.25 mg/$cm^2$ after test, and the pH value was 6.70 and 5.36 before and after test, respectively. When using 30% glycolic acid peeling agent, the moisture content was measured 74.46 AU for the normal control group before test and 53.50 AU for the experimental group after test, the oil content was 13.82mg/$cm^2$ and 5.70 mg/$cm^2$ before and after test, and the pH value was 6.45 and 4.58 before and after test, respectively. As such, it was found that the changes of moisture and oil content on the skin rely on the concentration of peeling agent and the degree of exfoliation of keratin. The surface of stratum corneum of mice with application of 15% glycolic acid peeling agent was relatively smooth and the exposed cellular surface of keratinocyte had some wrinkles. The surface of stratum corneum of mice with application of 30% glycolic acid peeling agent was smooth. No wrinkles were observed under high-resolution scanning electron microscope.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.1
• /
• pp.111-118
• /
• 2005

The shape of vertical pattern of base station antenna affects greatly quality of the communication of not only a service zone but also adjacent cells and then it is an important point to be considered in designing cell coverage. Currently type of vertical patterns to be applied to base station antenna are divided into five classes. In designing antenna, these five classes are applied solely or compositely according to the environment to be used antenna. In this paper, the dual polarized antenna for base station that is with a continuous electrical down tilting and with a shaped beam pattern, that an upper side lobe is suppressed and a lower null is filled, is designed and fabricated for synthesizing of the shape beant the pattern synthesis methods proposed by R. S. Elliott is used sequentially and for the electrical don tilting, the phased array theory is applied. Measured results show the down tilting range from 0° to 14°, the gain of Min. 13.3dBi and the upper side lobe of Max. -23dB. And we verified that upper side lobe is not to vary greatly and null filling performance is favorable overall.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.29-34
• /
• 2021

Flammable substances are often present in the raw materials of pharmaceutical products manufactured by pharmaceutical companies. In this case, an excessive amount of flammable substances is added to make an intermediate, and flammable substances that do not participate in the reaction are removed through filtration and drying steps. In addition, the flammable liquid separated in the filtration process is accumulated in the form of splash filling in the filtrate container. In this case, vapor and mist of flammable liquid are generated, which lowers the lower limit of explosion and minimum ignition energy, and increases the risk of fire and explosion due to complex charging. In this study, by analyzing fire accidents that occurred during the recent filtration process of pharmaceutical companies, it is proposed to prevent static electricity accumulation by measures of nitrogen supply facilities, capacity improvement, conductive filter fabric and so on.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.442-445
• /
• 2011

본 논문에서는 3차원 head-tracked 디스플레이를 이용하여 스테레오 영상을 리타겟팅 하는 방법을 제안한다. 제안한 방법은 카메라 간격을 조절함으로써 사용자 시점에 맞는 스테레오 영상을 제공한다. 특히 중간 시점 영상 생성 시 발생하는 비폐색 영역에 대해 스테레오 일관성을 고려한 홀 필링(hole filling)을 적용하여 보다 편안하고, 개인별로 최적화 된 입체감 및 깊이감을 제공하도록 한다. 제안한 방법을 검증하기 위해 3차원 그래픽 모델을 이용해 결과 영상을 비교하였으며, 사용성 테스트를 통해 리타겟팅 된 스테레오 영상이 사용자가 입체영상을 인지하는데 미치는 효과를 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.141-141
• /
• 2012

고종횡비 10:1 비아를 Si wafer 상에 형성하기 위해 $7{\mu}m$ 직경의 마스크로 포토작업하여 Cr층을 100nm 스퍼터링하여 PR(photo resistor) 대신의 에칭 barrier 막으로 사용하였다. 얼라인, 노광, 현상을 거쳐 Cr에칭, PR 제거후 ICP(inductively coupled plasma) 공정으로 Si deep etching하여 via 직경 $10.16{\mu}m$, 깊이 $102.5{\mu}m$의 고종횡비 비아를 형성하였다. 구리필링도금을 위해서 필수적인 seed layer는 단층 또는 다층의 금속막을 스퍼터링 법으로 형성하였다. 형성된 seed layer 단면을 FE-SEM(Field emission scanning electron microscope)으로 관찰하여 내부에 seed 층의 형성 유무를 확인하였다.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2000.04a
• /
• pp.95-100
• /
• 2000

시뮬레이션 모델과 전문가 시스템의 학제간 연구는 그동안 많은 학자에 의해 진행되어 왔다. 전문가 시스템은 추론 기관과 지식베이스로 구성되며, 지식베이스는 사실과 규칙으로 구성된다. 사실과 규칙은 추론 기관의 추론을 위한 정보로 사용된다. 요즘의 정보 시스템은 데이터베이스를 가지며 데이터베이스의 정보를 기반으로 모든 처리가 진행된다. 이러한 정보 시스템에 삽입되어 사용되는 시뮬레이션 모델의 전문가 시스템도 데이터베이스의 정보를 사용하여 추론을 행한다. 데이터베이스의 정보는 전문가 시스템의 추론을 위한 사실로 사용되고, 추론 결과를 저장하기 위한 저장 장소로 사용된다. 본 연구에서는 전문가 시스템의 사실과 데이터베이스 사이의 사상을 정리하고, 이를 위한 사실 클래스를 제안한다. 이 사실 클래스는 데이터베이스 데이터를 전문가 시스템이 사용할 수 있도록 필링하는 기능과 추론을 위한 의미 분석의 기능을 갖는다. 또한, 데이터베이스에 추론 결과를 저장할 때 생기는 데이터의 일치성과 무결성 문제를 해결한다. 이 사실 클래스를 갖는 전문가 시스템 기능을 갖는 시뮬레이션 모델을 그래이팅 생산 공정의 시뮬레이션에 적용하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.175-177
• /
• 2011

오늘날 반도체 소자의 성능을 좌우하는 배선폭은 수십 나노미터급으로 배선폭 감소에 의한 소자의 집적은 한계에 다다르고 있다. 또한 2차원 회로 소자의 문제점으로 지적되는 과도한 전력소모, RC Delay, 열 발생 문제등도 쟁점사항이 되고 있다. 이런 2차원 회로를 3차원으로 쌓아올린다면 보다 효율적인 회로구성이 가능할 것이고 이에 따른 성능향상이 클 것이다. 3차원 회로 구성의 핵심기술은 기판을 관통하여 다른 층의 회로를 연결하는 실리콘 관통 전극을 형성하는 것이다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.107-114
• /
• 2008

In wireless access systems, there has been much interest in enhancing the performance of orthogonal frequency division multiplexing OFDM) in a frequency selective fading channel. If the channel is static and is perfectly known to both the transmitter and the receiver, the water-filling technique with adaptive modulation is known to be optimal. However, for OFDM systems, this requires intensive traffic overheads for reporting channel side information on all subcarriers to the transmitter In this paper, we propose an adaptive modulation and coding scheme for bit-interleaved coded OFDM (BIC-OFDM) for downlink packet transmissions with reduced feedback information. To minimize the feedback information, we employ a rate adaptation method based on the OFDM symbol rather than on each subcarrier. To illustrate the performance gap between the optimal water-filling and the proposed scheme, we will compare cutoff rates for both schemes. It is shown that the loss is less than 2dB while the proposed scheme significantly reduces the feedback payloads. Also, the OFDM system in multiuser environment with subcarrier grouping is considered. It is shown that by exploiting multiuser diversity the throughput of the proposed scheme approaches the channel outage capacity as the number of users and the number of subcarrier groups increase.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.333-340
• /
• 2019

This paper was described about the preparation of the multi-functional mask pack and its evaluation. Here, the multi-functional effects means the far-infrared emissivity effect due to polyphosphoric acid, the freckles treatment effect and peeling effects due to inclusion complexes, and the skin temperature decreasing effect due to Lavender-extraction compounds. The the hazardous chemicals, viscosity, and pH were determined blow 0.01%, 280 cP, and pH=6.92 in the prepared multi-functional mask pack solution, respectively. The multi-functional mask pack prepared with dipping method in the solution were showed the value of $0.882{\mu}m$ (Far-infrared emissivity) and $3.40{\times}10^2W/m$ at $37^{\circ}C$ (Far-infrared radiation energy), respectively. After taking multi-functional mask pack, the skin moisturizing rate was indicated 35.5%, and the skin temperature was showed in the range of $24{\sim}26^{\circ}C$. The skin stimulation test for the 30 volunteer was showed very strong stability.

• The Research Journal of the Costume Culture
• /
• v.12 no.6 s.53
• /
• pp.945-952
• /
• 2004

Shrink-resist effects and properties of the knitted fabrics from wool/acrylic(W/A) fiber blends were determined to find out an optimal blending ratio keeping the quality properties of wool products. The test fabrics were knitted by a weft knitting machine with all needle knitting structure ($0{\times}0$ rib) under the same knitting conditions with five different types of yarns: $W100\%,\;A100\%$, and W/A blended yarns(70/30, 50/50, 30/70). Shrinkage during repeated washing, electrostatic propensity, thermal resistance and pilling propensity of W/A knits. The shrink resistance was significantly enhanced on repeated washing of W/A knits, especially, over $50\%$ acrylic blended knits. Addition of strong physical force and alkali detergent applied in this washing experiment brought about superior effects with the low shrinkage rate although it was very severe washing conditions for wool fabrics. The results from the washing experiment implies that W/A blend knits can be machine washed at individual households with other ordinary laundry. There was some changes and variation found in thermal resistance, electrostatic propensity, and pilling. W/A 50/50 blended knits did not bring serious changes to other physical properties comparing with original wool, which helps consumers care wool knitted clothes more conveniently.