• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.36-42
• /
• 2000

We calculate the facet reflectivity as a function of the waveguide width of buried channel waveguides using the angular spectrum method and the field profiles obtained by the effective index method, the variational method and the modified variational method, respectively and discuss the results. As the waveguide width increases, the facet reflectivity of buried channel waveguides approaches to that of slab waveguides. As the waveguide width decreases, the facet reflectivity of quasi-TE mode decreases from that of slab waveguides, while that of quasi-TE mode increases from that of slab waveguides. The variation of the facet reflectivity of quasi-TE mode as a function of waveguide width is much larger than that of quasi-TM mode. When the aspect ratio is one, the difference between the facet reflectivity of quasi-TE mode and that of quasi-TM mode using the variational method and the modified variational method is negligible, while the difference between the facet reflectivity of quasi-TE mode and that of quasi-TM mode using the effective index method is large. In the case of quasi-TE mode, the facet reflectivity using the angular spectrum method and the field profiles obtained by the modified variational method could be more accurate than that obtained by the effective method. In the case of quasi-TM mode, the facet reflectivities obtained by the various methods are almost the same.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.9-15
• /
• 1997

The study area is located in the Central Bransfield Basin, Antarctica. To analyze the morphology of seafloor, structure of basement, and seismic stratigraphy of the sedimentary layers, we have acquired, processed, and interpreted the multi-channel seismic data. The northwest-southeastern back-arc extension dramatically changes seafloor morphology, volcanic and fault distribution, and basin structure along the spreading ridges. The northern continental shelf shows a narrow, steep topography. In contrast, the continental shelf or slope in the south, which is connected to the Antarctic Peninsula, has a gentle gradient. Volcanic activities resulted in the formation of large volcanos and basement highs near the spreading center, and small-scale volcanic diapirs on the shelf. A very long, continuous normal fault characterizes the northern shelf, whereas several basinward synthetic faults probably detach into the master fault in the south. Four transfer faults, the northwest-southeastern deep-parallel structures, controlled the complex distributions of the volcanos, normal faults, depocenters, and possibly hydrocarbon provinces in the study area. They have also deformed the basement structure and depositional pattern. Even though the Bransfield Basin was believed to be formed in the Late Cenozoic (about 4 Ma), the hydrocarbon potential may be very high due to thick sediment accumulation, high organic contents, high heat flow resulted from the active tectonics, and adequate traps.

• Asian Journal of Turfgrass Science
• /
• v.26 no.2
• /
• pp.116-122
• /
• 2012

The study was conducted to know whether turfgrass wear tolerance, growth, and quality could be improved by the application of silicon and potassium. First, turf responses to silicate and potassium were evaluated by several parameters such as, turf visual quality, root length, shoot density, and dry weight under the field condition. Second, turf responses to traffic frequencies were examined by turf growth (root) length, shoot density and dry weight) and soil hardness under the field condition. Finally, under traffic stress condition, the effects of silica and potassium application on wear tolerance were evaluated through the methods described above. Creeping bentgrass (Agrostis stolonifera) rooting were significantly improved by silica. The root length was enhanced by an increase in potassium silicate application. Certain level of light traffic is beneficial while frequent traffic cause serious adverse effect on visual quality of bentgrass. Under a traffic stress condition with 10 times of footing a day for 30 days, silica and potassium increased turf visual quality by 6.38% and 10.25% respectively when compared to the control. Silica and potassium treatment on trafficked plot increased turf visual quality by 11.4% and 10.2% respectively in comparison with the control with significant reduction of wear injury from the traffic. A co-application of potassium silicate with potassium sulfate provided the enhanced visual quality of turf as compared to application of silica or potassium fertilizer, respectively.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.131-136
• /
• 2017

Automobile engine oil is the most important lubricant for operating as the engine is started. Recently, manufacturers of the automotive industry and lubricants are considerably improving the quality of oil with additive to extend change cycle period. Most customers are recommended genuine oil among different types from shop expert. Through this report we suggest another reference point for consumer to pick highly efficient lubricant. This report is investigated oil compounds to compare with 6 different automotive considering actual running condition for 7 months. we conducted experiment from physical and chemical perspectives. In the field, through various experiments oil compounds between mineral oil and synthetic oil are largely distinguished in oxidation, viscosity, fluid and TBN. These are influenced by engine part wear as piston, bearing etc. Comparing various investigation with different oil the performance of synthetic oil is shown better condition in flash point, oxidation stability and also found less in change pollutant iron, Al compounds. Additives of oil show clear difference Ca level in detergent-dispersant both mineral oil and synthetic oil. And Zn in extreme pressure additives and P in Lubricity improver make no difference to both.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.636-650
• /
• 2008

DTV has a great advantage as compared to Analog TV in picture quality under low reception field strength. Various high quality tuners have been developed to result in much smaller Noise Figure of the receivers and many trials for receiving DTV signal through indoor antenna. In this paper, results of intensive field tests on the indoor reception of DTV are presented. Tests were carried out around Seoul-Gyeonggi Metropolitan area. Commercial directional and omni-directional antennas and 5th generation receiver were used for reception availability tests. The effects of heights, locations, and types of the house as well as the distance to the transmitter on the reception performances are analyzed. Our test results will be applied to improve the indoor reception environment of DTV.

• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.130-136
• /
• 2009

The present study has been performed to evaluate the reliability of the fire field model (FDS version 5.2) with yield rate concept of combustion products. The CO and smoke density predicted by FDS model was directly compared with measurement in a reduced scale ISO-9705 room. The GER (global equivalence ratio) concept was used to characterize the CO and smoke density with ventilation condition in the fire compartment. The FDS model tends to under-predict CO concentration and smoke density than those of measurement for the under-ventilated conditions. Also, the discrepancy between predicted and measured result increases as GER increases. In order to improve the reliability of the fire model for performance evaluation of fire safety, the fire model is necessary to be validated in various fire cases as well as develop detailed physical model.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.15-15
• /
• 2017

본 연구는 필드 작업 시 작업조건에 따른 정식기의 PTO 부하를 측정하고, 이를 이용하여 작업조건에 따른 안전율 시뮬레이션을 목적으로 수행하였다. 부하 계측 시스템은 PTO 축의 부하를 측정하기 위한 토크 센서, 토크 센서에서 발생한 신호를 수집하기 위한 데이터 수집장치, 노트북에 전원을 공급하기 위한 파워 컨트롤러로 구성하였다. 토크센서에서 입력된 부하 데이터를 처리하기 위한 소프트웨어는 Labview(Version 2011, National Instrument, USA)를 사용하였다. 포장시험은 유사한 토양 조건에서 4회 반복 시험을 수행하였으며, 작업속도 고속 조건에서 4개의 주간거리(26, 35, 43, 80cm)와 3개의 식부깊이 (85, 105, 136mm)에 대하여 수행하였다. 안전율 시뮬레이션을 위한 소프트웨어는 KISSsoft(Version 2016, Kissling & Co. AG, Switzerland)를 사용하였다. 식부깊이 85mm에서 주간거리 26, 35, 43, 80cm일 때 작업시 각각 굽힘 안전율은 2.2874, 2.4507, 2.7139, 2.8064로 나타났으며 접촉 안전율은 1.1787, 1.2799, 1.3205, 1.3275로 나타났다. 식부깊이 105mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 2.1261, 2.2781, 2.4879, 2.5866로 나타났으며 접촉 안전율은 1.1296, 1.1425, 1.2710, 1.2507로 나타났다. 식부깊이 136mm에서 주간거리 26, 35, 43, 80cm일 때 작업 시 각각 굽힘 안전율은 1.6587, 1.6651, 1.7824, 2.2198로 나타났으며 접촉 안전율은 1.0030, 1.0104, 1.0450, 1.1931로 나타났다. 주간거리에 따른 식부깊이의 굽힘 안전율과 접촉 안전율은 가장 차이가 큰 주간거리 80cm에서 식부깊이가 85, 105, 136mm일 때 작업 시 각각 굽힘 안전율은 2.8064, 2.5866, 2.2198로 나타났으며 접촉 안전율은 1.3275, 1.2507, 1.1931로 나타났다. 시뮬레이션 결과 정식기 베벨기어의 안전율은 주간거리가 짧을수록, 식부깊이가 깊을수록 더 낮게 나타났다. 그러므로 정식 작업 시 정식기의 부하와 내구성을 고려하여 적절한 작업조건을 선정해야 함을 알 수 있다. 또한 향후 다양한 토양 조건 및 작업 단수 등에 따른 포장시험을 추가로 진행하여 여러 조건에서의 안전율 시뮬레이션을 수행할 예정이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.4
• /
• pp.39-46
• /
• 2005

This research concerns the ADS drive method of 3 electrodes AC PDP and is determined the minimum pulse width of the address and the sustain, which the steady sustain discharge without decreasing luminance can be obtained. From the experimental result, if the address pulse width became $1.5[{\mu}s]$ or more a effective address discharge with the operating margin of 35[V] was possible. And if the sustain pulses width became $2[{\mu}s]$ or more, a steady sustain discharge with the operation margin of 25[V] was possible. When this condition is applied to Full-HDTV class PDP with the in lines of horizontal scanning lines, 8 sub-fields and total 1420 sustain pulses can be used.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.320-322
• /
• 2006

현재 선진국에서는 대규모 정전 사태에 대비할 수 있는 광역 감시 및 보호 시스템이 연구되고 있고 실제 필드에 적용되어 사용중인 시스템도 있지만 통신 환경의 호환성등 제한 조건이 발생되고 있다. 이에 변전소 자동화 국제표준 프로토콜인 IEC 61850을 적용하여 기존 광역 감시 시스템들의 통신 호환성의 제약을 해결하고자 하였다. 국제 표준인 IEC 61850 프로토콜은 변전소 자동화 시스템을 위해 표준화된 객체 모델을 기반으로 이루어지고 있지만 전력설비의 다양한 모델을 완벽하게 객체화하기 위하여 TC57위원회에서는 지속적으로 객체 모델 수정 및 추가 작업을 진행중이다. 본 연구는 광역 전력계통 감시에 필요하지만 IEC TC57에서 표준화되지 않은 전압안정도를 위한 객체 모델을 제시하였고, 객체에 대한 Logical Node(이하 LN)과 Common Data Class(이하 CDC)를 구성하였다. 이 LN은 LS산전의 지능형 전력 시스템 정보 장치(i-PIU: intelligent Power system Information Unit, PMU: Phasor Measurement Unit)에 적용되고 있다.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.566-574
• /
• 2000

Although a numbed of variants of 2D HMM have been proposed in the literature, they are, in a word, too simple to model the variabilities of images for diverse classes of objects; they do not realize the modeling capability of the 1D HMM in 2D. Thus the author thinks they are poor substitutes for the HMM in 2D. The new model proposed in this paper is a hidden Markov lattice or, we can dare say, a 2D HMM with the causality of top-down and left-right direction. Then with the addition of a lattice constraint, the two algorithms for the evaluation of a model and the maximum likelihood estimation of model parameters are developed in the theoretical perspective. It is a more natural extension of the 1D HMM. The proposed method will provide a useful way of modeling highly variable patterns such as offline cursive characters.