• Korean Journal of Microbiology
• /
• v.34 no.3
• /
• pp.126-131
• /
• 1998

Reduction of hexavalent chromium to its trivalent form by leachate microorganisms was studied in batch and bench-scale continuous stirred tank reactor. The inoculum was a culture of microorganisms in leachate and capable of providing up to 90% chromate reduction during 72 h batch assay with $20mg\;Cr(VI)\;L^{-1}$ in minimal media containing different levels of leachate (10 to 60%) and glucose (50 to 200 mM). Addition of glucose increased the efficiency of chromate reduction, but adverse effect was observed with increase of leachate probably due to the competitive inhibition between chromate and sulfate ions. The continuous culture experiment was conducted for 124 days using synthetic feed containing different levels of chromate (5 to $65mg\;L^{-1}$) at room temperature. With a hydraulic retention time of 36 h, chromate reduction efficiency was mostly 100% when Cr(VI) concentrations in the reactor were in the range of 5 to $50mg\;L^{-1}$ Specific rate of Cr(VI) removal was calculated as $3.492mg\;g^{-1}\;protein\;h^{-1}$ during the period of 101~124 days from the start-up which showed 81.2% of average reduction efficiency. The results indicate the potential application of using leachate microorganisms for detoxification of hexavalent chromium in various chromium-contaminated wastewater from landfill or tannery sites.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.90-90
• /
• 2012

극세섬유는, 1970년대 말부터 일본의 합섬업체들이 천연소재인 Silk를 모방하기 위해 개발을 시작하였으며, 개발된 섬유의 굵기가 0.5d(1denier=1g/9,000m)이하인 것을 말한다. 이후 극세사에 대한 끊임없는 노력으로, 1980년대에는 천연스웨이드 풍의 인조피혁의 제조가 가능한 0.1d이하급 초극세사가 N/P(Nylon/Polyester) 복합방사된 형태로 개발되었으며, 일본, 및 한국 등에서 이들 소재로 제조된 직편물 제품이 첨단 고부가소재로서 호황을 누려왔다. 이러한 초극세사는 다양한 형태로 발전되어왔는데, 해도형(Islands-in-a-Sea Type), N/P(Nylon/PET), P/N(PET/Nylon) 등이 대표적인 형태이며, 가공공정 중에서 분할이 되면서 그 특성을 발현한다고 하여 분할사, 형태에 따라서 N/P 분할사라 하기도 한다. 최근들어 이러한 N/P 분할사는 기존의 의류용 용도뿐만 아니라, Wiping Cloth, 극세사 타울, 항진드기용 침장 등 다양한 비의류용 소재로도 확대 전개되고 있으며, 이렇게 다양화 되어가고 있는 용도에 따른 공정별 최적 가공 방법에 대한 연구가 진행 중이다. 사가공 공정에 있어서는 텍스쳐링 방법이 적용되기도 하는데, 가장 보편화된 텍스쳐링 방법으로는 DTY(Draw Texturing Yarn), ATY(Air Texturing Yarn) 등의 형태가 있으며, 이러한 텍스쳐링 방법은 물성에 민감한 N/P 분할사의 강도, 신도, 분할도에 영향을 미치게 된다. 본 연구에서는 기존의 텍스쳐링 방법이 아닌 Fancy사 형태로 사가공을 하였으며, 직물로 제직하고, 분할 가공하여 직물로써의 물성까지 분석하였다. Fancy사는 색이나 형의 변화로 디자인효과를 준 실을 말하는데, 심사, 부사, 압사로 이뤄지며 의장사, 장식사 등으로 불려지기도 한다. 주요 공정을 보면, 크릴형성용 부사를 500-600T/M으로 가연한 연사를 얻는 제1공정과, 이 가연된 부사와 심사를 합사하는 제2공정 및 합사된 크릴의 뒤틀림을 방지하기 위하여 압사로 크릴을 고정하여 주는 제3공정으로 이루어진다. 사용된 N/P 분할사는 NP30/36dty, NP50/36dty를 사용하였으며, 부사의 오버피드 및 피드되는 사에 따라 각각 8종, 7종의 Fancy사를 제조하여 섬도(Denier), 강도(Tenacity), 신도(Elongation)를 측정하였다. 또한, 이들 사들로 제직 및 분할가공을 하여 인장강도, 인장신도, 인열강도, 마모강도, 공기투과도 등의 물성과 중량, 두께를 측정하였으며, 온도, NaOH 농도, 시간 등의 분할 가공조건에 따른 직물의 인열강도 변화도 측정하였다. 이렇게 공정별 조건에 따른 물성의 변화분석을 통해 추후 N/P의 제품화 전개에 도움이 되고자 하였다.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.177-182
• /
• 2008

This study was carried out to investigate the reaction of lipase-catalyst transesterification using animal fat recovered from fleshing scrap generated during leather making process. Transesterification reaction between fat and primary or secondary alcohol was carried out under the condition of immobilized enzyme catalyst. The conversion rate was the highest when 1.5 mole of methanol was injected by 4 times. As for lipase, Candida antarctica showed the highest conversion rate of 82.2% among the 4 different lipases. It was found that water contained in the fat causes lower conversion rate. The condition of 1.2wt. % of water in the fat decreased the conversion rate by 40%. It was considered that the resulted reactant, fatty acid ester could be used as raw material for biodiesel with the characteristics of not generating SOx and diminishing smoke.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.103-114
• /
• 2020

On-arrival duty free will prevent Korean outbound passengers from keeping the duty free items they purchased at the departure during their travel. Most Korean tourists have requested the airport authority to install on-arrival duty free since the grand-opening of Incheon int'l airport. Considering the fierce hub airport competition in the North East Asian region, the Korean government's decision to install on-arrival duty free is regarded as a well-timed intervention. The purpose of the research was to analyze sales correlation based on a comparison of sales of both departure and on-arrival duty free and to propose an administrative implication. Compared to business conglomerates running departure duty free, on-arrival duty free operators, who are small or medium companies, have weakness in product composition, marketing, and merchandising capabilities. According to the analysis, outbound passengers, who purchased fashion accessories and leather products at the departure duty free, tended to purchase cosmetics/perfume or liquor on the arrival duty free. Such complementary purchasing behavior of passengers showed there is barely a negative correlation between departure and on-arrival duty free.

• Biomedical Science Letters
• /
• v.3 no.2
• /
• pp.177-185
• /
• 1997

This study was performed to investigat the prevalence rates disease in industrial workers (16, 453) in Pusan city from Jan. 1, 1993 to Dec. 31, 1995. The results were as follows: The male to female ratio was 1.9:1.0 and average age was 43$\pm$17 in male, 38$\pm$15 in female of subjects. The percentage value of patients was 14.0% in male, 7.4% in female of total patients 1, 932 (11.0%). The prevalence raters of pulmonary tuberculosis, hepatic disease, and occupational hearing loss were significantly increased in male than females (p<0.001). But anaemia and organic solvent poisonings significantly increased in females than males (p<0.001). The prevalence rates of hepatic disease increased significantly in below 29, 30-39 and 40-49 age groups, that of cardiovascular disease increased significantly in the age group over 50 years (p<0.001). According to industrial types, the prevalence rate of cadiovascular disease increased in electricity and constration and shoes and rubber in disease, there of hepatic disease increased in primary metal, transportation and maintenance and other industrial, those of occupational hearing loss in drink and food and machinery. The prevalence rate of disease increased significantly long working duration in all diseases except lead poisoning.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.109-120
• /
• 2000

In the analysis of the common categories, moisture contents and organic concentrations were not much different according to the types of industry or treatment facilities. When heavy metals contribution of the sludge from domestic and industrial wastewater treatment facilities was analyzed, As, Hg and Cr concentrations were relatively high among 42 standards of the fertilizer law. As concentration war higher in 28 of 42 facilities (67%) than limits of the fertilizer law. Hg concentration was not acceptable in the 21 of 42 facilities (50%). Cr concentration was not acceptable in 9 of 42 facilities (21%). From these results, It is found that As is the most frequently detectable component and contaminant than any other heavy metals in sludges. The data from this experiment was also compared with the guidelines of harmful organics and the rest of heavy metals that are regulated by some of the foreign countries. Be, Se and Mo concentrations were lower than the limits. Among the organics, the average concentration of PCB (10 samples) was 26.2 ppb. The highest concentration was 162.6 ppb in the sludge of the municipal wastewater treatment facilities and the lowest concentration was 2.14 ppb from the skin manufacturing industry. From the leaching analysis of re-manufacturing goods from the sludge, most of them was acceptable on the regulation law but Cr concentration was over the limit.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.3
• /
• pp.195-206
• /
• 1979

Where the industrial waste is increasing in number of kind and in quantities by the industrialization and population increases, the pollution problem is not only national but grobal question of the day. This paper is trying to invite attentions by the people who are working in both sector-natural sciences and industries in reviewing limited reports and materials. 1. By the chemical evaluation of over 20 industrial waste produced in Korea, potential wastes for commercial fertilizer would be wastes from alcohol fermantation, beer brewery, leather processing, synthetic fiber, and coffee grounds. 2. The composition of city waste is differ from other countries and sludge cake from human feces processing is promising one in the organic matter and phosphate content particularly. However, the content of heavy matals, specific order, and availability of phosphate are the bottle-neck for the development. 3. There is one commercial fertilizer from industrial waste in the market. It is very reasonable in the content of nitrogen and organic matter, and its formulation and responeses on crops. 4. Discussions were also given on the general problems in processing and marketing of fertilizers from industrial waste, however, scientists and industrial owners have to pay more attention on the development of fertilizers from tire industrial wastes because of vital environmental protection view-point.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.320-328
• /
• 2005

The most common five chlorophenols (4-chloro-3-methylphenol, 2,4,5-trichlorophenol, 2,4,6-trichlorophenol, 2,3,4,6-tetrachlorophenol, pentachlorophenol) were determined from the industrial wastewater by GC/MS. The samples were collected from the petrochemical company, textile company and leather making company. The developed analytical method was modified by USEPA Method 3510. The samples were extracted with dichloromethane under pH 2 and pH 5-6, and determined by the GC/MS with SIM mode. There were good linearities (above $R^2=0.9943$) on e ranges of the 0.1 ng/mL~10 ng/mL and 0.5 ng/mL~10 ng/mL, and the limit of detection were between 0.1 ng/mL and 0.5 ng/mL. The absolute recoveries were measured at the concentration of 1, 5, and 10 ng/mL, and the recovery was 71.6~98.9% except for PCP. The relative standard deviation (RSD) was 1.2~14.3% and it gave a good reproducibility for the assay. The bias, which shows the accuracy, was a good although it was a little high values (11.3~22.1%) at the low concentration (1 ng/mL).

• Analytical Science and Technology
• /
• v.26 no.5
• /
• pp.315-325
• /
• 2013

The possibility of acute hepatotoxicity caused by dimethylformamide (DMF) requires regular monitoring of the workers who are using DMF to prevent the occupational disease. The authors performed ambient and biological monitoring of workers involved in synthetic leather manufacturing processes using DMF to assess the correlation between the markers of ambient and biological monitoring of DMF. The authors monitored 142 workers occupationally exposed to DMF from 19 workshops in the synthetic leather and ink manufacturing industries located in northern region of Gyeonggi-do. The subjects answered questionnaire on work procedure and use of personal protective equipment to be classified by exposure type. DMF in air samples collected using personal air samplers, diffusive and active sampler, was analysed using gas chromatograph-flame ionization detector (GC-FID) with DB-FFAP column (length 30 m, i.d. 0.25 mm, film thickness 0.25 ${\mu}m$). Urinary N-methylformamide (NMF) was analysed using gas chromatograph-mass selective detector (GC-MSD) at selected ion monitoring (SIM) mode with DB-624 column (length 60 m, i.d. 0.25 mm, film thickness 1.40 ${\mu}m$). Geometric mean (GM) and geometric standard deviation (GSD) of the ambient DMF was $6.85{\pm}3.43$ ppm, and GM and GSD of urinary NMF was $42.3{\pm}2.7$ mg/L. The ratio of subjects with DMF level over 10 ppm was 44%, and those with urinary NMF over 15 mg/L was 87%. NMF in urine adjusted by DMF in air was $4.61{\pm}2.57$ mg/L/ppm and $9.50{\pm}2.41$ mg/L/ppm, respectively, with or without respirator. There was seasonal differences of NMF in urine adjusted by DMF in air, $7.63{\pm}2.74$ mg/L/ppm in summer and $4.53{\pm}2.29$ mg/L/ppm in winter. The urinary NMF concentration which corresponds to 10 ppm of ambient DMF was 52.7 mg/L (r=0.650, n=128). Considering the difference of the route of exposure which resulted from the compliance of wearing personal protective equipment, the estimated contribution of respiratory and dermal exposure route for DMF was 48.5% vs. 51.5%.