• Korean Journal of Poultry Science
• /
• v.41 no.2
• /
• pp.93-98
• /
• 2014

This study was conducted to analysis the reason for implementing HACCP system, advantage and disadvantage of HACCP system implemented laying hen farm. The study was carried out by randomly selected fifteen laying hen farms located in all around Korea. All data were collected from fifteen laying hen farms before and after the implementation of HACCP system. The results were as follows: The egg production rate, livability rate and monthly used animal medicine fee did not changed after HACCP system implementation. However, monthly used disinfectant fee tended to be higher in HACCP farm compared to non-HACCP farm. 26.92% of the laying hen farmer responded enhancement of their farm competitiveness as the major propose for implementing HACCP system. The advantages of HACCP implemented laying hen farms were methodical farm management (22.39%), improvement of awareness (21.18%), improvement of the farm sanitation management level (15.30%), safety egg production (15.05%), productivity enhancement (7.29%), reduction of mortality rate (6.82%), and improvement of labor's welfare (5.89%). The disadvantages of HACCP implemented laying hen farms were HACCP recording (43.30%), alteration of consciousness (22.60%), HACCP monitoring (11.11%), HACCP education (9.97%), HACCP verification (6.90%), and A high turnover of labor (6.13%). In conclusion, implementation of HACCP system to laying hen farm did not affect on the productivity or the use of animal medicine. However, the HACCP system may enhance safety and sanitation of egg production for consumer.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.369-376
• /
• 2003

This experiment was conducted to investigate the influence of different levels of metabolizable energy (ME) and crude protein (CP) on post-molt performance and egg quality of spent laying hens. Four hundred and thirty two, ISA Brown hens at sixty six weeks of age after molt induction were fed six experimental diets containing three ME (2,750, 2,800, 2,850 kcal/kg) with two CP (15, 17%) levels in a factorial design. The influence of ME and CP were evaluated on egg production, egg weight and feed intake throughout 24 weeks of production. Egg mass and feed conversion ratio (FCR) were measured during the experimental period. Haugh unit, yolk color and eggshell breaking strength were measured at 5%, 50%, peak, post peak and end stage of egg production. The hens fed 2800 kcal/kg diet along with 15% CP recorded the highest outcome of egg production (P<0.05). The egg weight has been shown to increase with hens receiving 2,800 kcal/kg ME. Daily egg mass tended to increase in hens fed with 15% CP and 2,800 kcal/kg ME. Feed intake decreased significantly with the level of ME and CP in the diet increased (P<0.05). Yolk color was improved significantly in eggs laid by the hens receiving 17% CP than 15% diet. It also tended to be higher in 17% CP with 2,800 or 2,850 kcal/kg ME diet treatments. Egg shell breaking strength increased with hens receiving diets of 15% CP and 2,800 kcal/kg. From this experiment it can be concluded that the ME level of 2,800 kcal/kg coupled with 15% CP could be used to achieve the higher egg production and better eggshell strength in induced molting hens.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2002.11a
• /
• pp.100-102
• /
• 2002

This study was conducted to determine the effect of feeding betaine on egg production, lipid metabolism and osmoregulation in laying hens. Three hundred and sixty layers were fed corn-soy basal diet containing 16% CP, 2800 kcal/kg ME from 18 to weeks. Hens were provided with betaine 0, 300, 500 or 1200 ppm. Egg production, feed intake, egg weight and feed conversion were examined in every four weeks. Liver and egg betaine. serum cholesterol and neutal fat were measured at the mid experiment. Egg production was not statistically different among treatments from 18 to 26 weeks of age, but significantly increased for the rest of period in hens fed more than 600ppm betaine(P＜0.05). Betaine added treatments showed a tendency to increase feed intake. Feed conversion tended to improve from 26 to 33 weeks old in betaine supplemental groups. Egg qualify was not influenced by dietary supplemental betaine. Betaine supplementation seemed to increase in liver betaine. but not in egg betaine. Serum total cholesterol, triacylglycerol, abdominal fat content and ileal osmolality were not different. However, liver fat content was prone to decrease in betaine supplemental groups. The result of this experiment suggested that dietary supplemtal betaine can improve the egg production and decrease liver fat content.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.79-86
• /
• 2019

Recently, the use of lithium ion battery(LIB) has increased. As a result, the price of lithium and the amount spent lithium on ion battery has increased. For this reason, research on recycling lithium in waste LIBs has been conducted1). In this study, the effect of roasting for the selective lithium leaching from the spent LIBs is studied. Chemical transformation is required for selective lithium leaching in NCM LiNi_xCo_yMn_zO₂) of the spent LIBs. The carbon in the waste EV cell powder reacts with the oxygen of the oxide at high temperature. After roasting at 550 ~ 850 ℃ in the Air/N₂ atmosphere, the chemical transformation is analysed by XRD. The heat treated powders are leached at a ratio of 1:10 in D.I water for ICP analysis. As a result of XRD analysis, Li₂CO₃ peak is observed at 700 ℃. After the heat treatment at 850 ℃, a peak of Li₂O was confirmed because Li₂CO₃ is decomposed into Li₂O and CO₂ over 723 ℃. The produced Li₂O reacted with Al at high temperature to form LiAlO₂, which does not leach in D.I water, leading to a decrease in lithium leaching ratio. As a result of lithium leaching in water after heat treatment, lithium leaching ratio was the highest after heat treatment at 700 ℃. After the solid-liquid separation, over 45 % of lithium leaching was confirmed by ICP analysis. After evaporation of the leached solution, peak of Li₂CO₃ was detected by XRD.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.225-233
• /
• 2020

By the standards and specifications for hygiene products, three test methods for formaldehyde are specified for each item type of hygiene product. After derivatization using acetylacetone and 2,4-dinitrophenylhydrazine (2,4-DNPH), formaldehyde is analyzed by spectrophotometer and high-performance liquid chromatography (HPLC). Validation of the three test methods was performed on tissue, diaper lining and waterproof layer, and panty liner products. The results of linearity (R²), limit of detection (LOD), limit of quantification (LOQ), recovery rate (%) and reproducibility (%), showed that all three methods are suitable for analyzing formaldehyde in hygiene products. After derivatization with 2,4-DNPH and cetylacetone, formaldehyde was analyzed at 0, 3, 6, 9, 24 and 48 hours by HPLC. Formaldehyde derivatized with 2,4-DNPH showed no statistically significant change in formaldehyde peak area over time (P>0.05). But, acetylacetone-derivatizated formaldehyde showed a negative correlation coefficient (r) over time (P<0.01). We investigated the residual amounts of formaldehyde in 205 hygiene products distributed in Busan. Among 74 disposable diaper products tested, 73 had low concentrations of formaldehyde (0.13-29.87 mg/kg). Moreover, formaldehyde was not detected in any of 78 tissue, 27 disposable paper towel, 12 disposable dishcloth, 7 paper cup, one brand of paper straw and 6 disposable napkin products.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.435-438
• /
• 2008

우리나라 최대전력은 70년대 연도별로 36만 kW, 약 15%씩 증가하였으나, 최근 2000년대에는 연도별로 300만kW 이상, 약 6%대의 증가를 보이고 있다. 발생시간도 70년대에는 저녁시간대에 주로 발생했으나 80년대부터 최근까지는 15시에 하계 최대전력이 발생하고 있다 아울러 최근에는 기상의 변동폭 증가로 여름과 겨울의 계절성이 증폭되는 추세에 있고 이러한 최대전력 발생의 이면에는 시간별 부하패턴이 다양하게 나타나고 있다. 과거 70-80년대에는 연간이나 월간 부하패턴 모두 평균전력대비 변동폭이 크게 나타났으나 최근에는 변동폭이 상당히 작아지고 있다. 이는 최대전력에 못지않게 전력소비량이 지속적으로 증가하여 부하수준이 평준화되고, 부하율이 높아지고 있다는 것을 나타내며 연중 및 일간 피크 발생시점도 다변화되는 특징을 보이고 있다. 따라서 이러한 부하패턴 변화에 합리적으로 대응하기 위해서는 짧은 기간의 부하관리보다는 상시 수요관리인 효율향상 위주의 프로그램이 필요하고, 저렴한 전기 요금의 정상화를 통한 전력소비 감축을 통한 대응이 중요하다. 외국의 사례를 보면 우리나라 냉방 및 난방전력은 현재보다 10%p-20%p 정도 점유비가 추가적으로 상승할 개연성이 높으므로 다양한 시나리오 예측을 통한 철저한 위험관리 체계 확립이 요구된다.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.48-54
• /
• 2015

In a centralized cooling plant, precise mechanical design and control strategy are required for peak and partial cooling load management. Otherwise, it will lead to low efficiency of cooling system and energy loss due to low partial load efficiency. The purpose of this paper is to enhance energy performance of the centralized cooling plant by controlling flow system in an industrial building using measured data and energy performance simulation program. The simulation results show that the proposed flow control can cut down annual electric power consumption by about 17% compared with the conventional cooling system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.30-35
• /
• 2003

In this paper, the transverse strain was measured using polarization maintaining fiber Bragg grating(PMFBG) sensor. PMFBG sensor was fabricated using phase mask and Excidmer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To find the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurement, The wavelength-swept fiber laser(WSFL) was used to construct the PMFBG sensor system. Experiments showed that the PMFBG sensor could successfully measure the transverse strain.

• Elastomers and Composites
• /
• v.46 no.4
• /
• pp.324-328
• /
• 2011

Blends were prepared by mixing BR, SBR and NBR to CIIR, which is used for outsole, at various mixing ratio, and effect of the mixing ratio on abrasion resistance and coefficient of friction was analyzed. CIIR interferes the crystalline formation of BR in BR/CIIR blends and this could be one of the factors that rapidly decreases abrasion resistance of BR/CIIR blends. $Tan{\delta}$ peak area of CIIR/BR blends decreased as the amount of BR present in the blends increased, and similarly, the coefficient of friction tended to decrease. Stress relaxation rate and rebound resilience of CIIR/BR blends decreased with increasing BR content, and it was presumed that their rebound resilience was affected by stress relaxation rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1032-1037
• /
• 2003

Boron-doped CdS thin films were chemically deposited onto glass substrates. X-ray diffraction (XRD), photoluminescence (PL), and Raman techniques were used to evaluate the quality of B-doped CdS films. XRD results have confirmed that B-doped CdS films has a hexagonal structure with a preferential orientation of the (002) plane. The PL spectra for all samples consists of two prominent broad bands around 2.3 eV (green emission) and 1.6 eV (red emission) and the higher doping concentrations gradually decreased the green emission and red emission. Raman analysis has shown that undoped films have structure superior to those of B-doped CdS films. Boron doping into CdS films improved the optical transmittance and increased the optical band gap.