• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.5
• /
• pp.56-64
• /
• 2020

A wind tunnel test of 29.7% scaled model of NASA Common Research Model was performed in small low speed wind tunnel. The wind tunnel model was fabricated in Aluminium in consultation with NASA Langley Research Center and AIAA Drag Prediction Workshop committee members. The static aerodynamic forces and moments were measured at a relatively low Reynolds number of 0.3 × 10⁶ due to tunnel capability limitations. Pitching moment of three types of model support(Fin sting, Blade sting and Belly sting) were compared. The pitching moment for corrected Belly sting and Fin sting were similar. The result of pitching moment for Blade sting was very small.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.224-231
• /
• 2015

An experimental study on aerodynamic coefficients of a lambda wing configuration was performed at the low speed wind tunnel of Agency for Defense Development. The main purpose of this study was to investigate the effects of sideslip angle on various aerodynamic coefficients. In the case of $0^{\circ}C$ sideslip angle, nose-up pitching moment rapidly increases at a specific angle of attack. This unstable pitching moment characteristic is referred to as pitch break or pitch up. As the sideslip angle increases, the pitch break is found to be generated at a higher angle of attack. Rolling moment is found to show similar behavior pattern to 'pitch break' style with angle of attack at non-zero sideslip angles. This trend gets severer at greater sideslip angles. Yawing moment also shows substantial variation of the slope and the unstable directional stability with sideslip angles at higher angles of attack. These characteristics of the three moments clearly implies the difficulty of the flight control which requires efficient control augmentation system.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.221-229
• /
• 2013

To find the influence of incident angle of wave on the moment of 3 storied steel moment resisting frame which is placed on the concrete rectangular pontoon, the fluid dynamic analysis is carried out, varying the period of wave from 5 to 15 second by 2 seconds. As increasing incident angle of wave to longitudinal axis, the influence of RAO-rolling is increased. The moment of longitudinal frame is increased apparently by the wave pressure when the incident angle is $0^{\circ}$. And the moment of the frame due to the wave pressure is decreased as the incident angle is increased. But the moment of frame due to acceleration caused from pitching and rolling is increased. It is shown that the increased moment when incident angle is $90^{\circ}$ is much greater than that of incident angle $0^{\circ}$.

• Proceeding of EDISON Challenge
• /
• 2016.11a
• /
• pp.4-8
• /
• 2016

본 연구에서는 플라잉 디스크를 이용하여 회전 운동의 유무에 따른 공력특성의 변화를 비교 분석하였다. 회전 운동이 발생하면 표면에 비대칭적으로 압력이 분포하기 때문에 롤링 모멘트가 발생하고 마그너스 효과로 측력이 발생하고 피칭모멘트, 회전감쇠모멘트가 발생하고 롤 안정성이 증가한다.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.554-559
• /
• 2016

본 논문은 EDISON CFD를 사용하여 스포일러가 장착된 무미익 BWB UCAV에 대하여 이차원 유동해석을 수행하였다. 무미익 형상은 일반적인 항공기보다 롤과 요 방향의 안정성과 조성성에 있어 불리한 특징을 갖는데 특히 이 착륙 시 고 받음각의 영역에서 발생하는 Pitch-up 현상이 항공기 안정성에 문제를 야기한다. 수직 미익 부재와 pitch-up 현상으로 인한 BWB형상의 UCAV가 지니는 단점을 보완하기 위해서 스포일러가 장착된 형상이 적용되기도 한다 본 연구에서는 윗면과 아랫면에 스포일러가 장착된 경우에 대해 전산유동해석을 수행하였다. 해석결과 윗면의 스포일러는 양력의 감소와 항력의 증가를 야기했으며, 아랫면의 스포일러는 양력과 항력을 모두 증가시켰다. 피칭모멘트의 경우 아랫면의 스포일러가 저받음각에서 안정성을 증가시켰다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.8
• /
• pp.64-71
• /
• 2004

A computational study on the supersonic flow around the lateral jet controlled missile has been performed. For this purpose a three dimensional Navier-Stokes computer code(AADL3D) has been developed and case studies have been performed by comparing the normal force coefficient and the moment coefficient of a missile body for different jet flow conditions including jet pressure and jet Mach number. The results show different behavior of normal force and moment variation according to jet pressure variation and jet Mach number variation. From the detailed flow field analyses, it is verified that most of the normal force loss and the pitching moment generation are taken place at the low-pressure region behind the jet nozzle. Furthermore, it is shown that the pitching moment can be efficiently reduced by obtaining the lateral thrust through higher jet Mach number rather than through high jet pressure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.5
• /
• pp.10-17
• /
• 2004

To achieve the advanced forward flight performance of helicopter, the passive control methods for enhancement of the dynamic stall characteristics of rotor blades are studied. To enhance the dynamic stall characteristics of the rotor blades, it is essential to improve the lift performance and the pitching moment performance simultaneously with the control of the separation on the rotor blades. For this point of view, both the fixed droop leading edge and the Gurney flap which are simply realized are used for control of the dynamic stall in severe dynamic stall conditions. From this study, the combination of both passive control methods showed dramatic enhancement of lift and pitching moment performance in dynamic stall than previous research results.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.941-946
• /
• 2023

To improve the lift, cruise speed, and range of eVTOL aircraft, which are being considered as future transportation vehicles, this paper introduces the concepts of Tilt Rotor and Tandem Wing to the aircraft. We developed an aircraft and conducted flight experiments to obtain flight videos and flight logs. The results of the analysis of the flight videos and flight logs showed that the aircraft's moment was excessively forward and the attitude was not recovered. To address this problem, we modified the wing incidence angles and surface areas in XFLR5 to obtain the optimal pitching moment coefficients to ensure vertical stability. We then analyzed the redesigned aircraft, developed using CATIA, through XFLR5. The results of this study provide valuable insights, suggesting that the incorporation of Tilt Rotor and Tandem Wing designs can contribute to achieving stable pitching moment coefficients. This innovative approach offers a promising avenue to significantly enhance vertical stability in UAM vehicles, paving the way for future advancements in the field.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2018

Lambda wing type Unmanned Combat Aerial Vehicle(UCAV) which adopts Blended Wing Body(BWB) has relatively less drag and more stealth performance than conventional aircraft. However, Pitching moment is rapidly increased at a specific angle of attack affected by leading edge vortex due to leading edge sweep angle. Wind tunnel testing and numerical analysis were carried out with UCAV 1303 configuration on condition of 50 m/s of flow velocity, $-4^{\circ}{\sim}28^{\circ}$ of the range of angle-of-attack. The effect of wing twist for longitudinal stability at the various angles of attack was verified in this study. When negative twist is applied on the wing, Pitch-break was onset at higher angle of attack due to delayed flow separation on outboard of the wing. On the other hand, pitch-break was onset at lower angle of attack and lift-to-drag ratio was increased when positive twist is applied on the wing.

• 한국가시화정보학회:학술대회논문집
• /
• 2004.04a
• /
• pp.9-18
• /
• 2004

초음속 유동하에서 측추력기 주위의 유동 현상을 실험 및 수치해석을 이용하여 해석하였다. 실험은 버지니아공대의 초음속 풍동과 건국대의 초음속 풍동을 사용하였으며 계산 코드는 Aerosoft 사의 GASP(ver.4.0)과 건국대의 AADL3D를 사용하였다. 실험결과는 Schlieren, Shadow graph 등의 가시화 장치와 압력 센서와 PSP(Pressure Sensitive Paint)를 이용하여 유동장 특성과 압력분포를 구하여 실제 작용되는 힘과 모멘트를 구하였다. 실험조건은 자유류의 흐름이 마하수 4 이고 측추력기와 자유류의 압력비가 532 이었다. 성능향상 방안으로 측추력기 후방에 램프를 설치하는 것을 제안하였으며 이에 대한 실험을 수행하여 수직력에 대한 변화는 없지만 피칭다운 모멘트가 약 $70\%$ 감소함을 보여주어 실제로 성능이 향상되었음을 입증하였다. 또한 측추력기의 성능에 영향을 주는 여러 가지 인자들에 대한 가시화실험을 수행하여 그 이해를 돕고자 하였으며, 현재 건국대에서 보유하고 있는 고속유동 관련 실험장치의 소개와 이를 이용한 연구들을 소개하므로써 압축성 유동장 연구에 이러한 실험장치의 필요성에 대한 이해를 구하고자 한다.