• Membrane Journal
• /
• v.27 no.1
• /
• pp.84-91
• /
• 2017

In this study, heterogeneous ion exchange membranes were prepared by mixing cation or anion exchange resins and commercial polyvinylidene fluoride (PVDF) for MCDI process. The mixing ratios of PVDF and ion exchange resins were 1 : 1, 1.4 : 1, 2 : 1, and 3 : 1. We characterized SEM, water content, ion exchange capacity, methanol permeability, and ion conductivity. In the viewpoint of membrane characterization, the blending ratio of 2 : 1 showed the best. For the blending ratio of 2 : 1, heterogeneous cation exchange membrane showed the water content 34%, ion exchange capacity 1.54 meq/g, ion conductivity 0.019 S/cm, and methanol permeability $2.28{\times}10^{-7}{\sim}8.86{\times}10^{-7}cm^2/s$ while In the case of heterogeneous anion exchange membrane, the result showed 37%, 2.18 meq/g, and 0.034 S/cm and $1.46{\times}10^{-7}{\sim}8.66{\times}10^{-7}cm^2/s$.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.473-479
• /
• 2016

We report a highly selective and sensitive 200 MHz Surface Acoustic Wave (SAW) sensor that can detect cyanide ion in aqueous solution using surface immobilized thioester molecules in combination with gold nanoparticles (AuNPs). To construct the sensor device, a monolayer of thioester compound was immobilized on the SAW sensor surface. At the sensor surface, hydrolysis of thioester group by nucleophilic addition of cyanide occurred and the resulting free thiol unit bound to AuNP to form thiol-AuNP conjugate. For the signal enhancement, gold staining signal amplification process was introduced subsequently with gold (III) chloride trihydrate and reducing agent, hydroxylamine hydrochloride. The SAW sensor showed a detection ability of $17.7{\mu}M$ for cyanide in aqueous solution and demonstrated a saturation behavior between the frequency shift and the concentration of cyanide ion. On the other hand, our SAW sensor had no activities for other anions such as fluoride ion, acetate ion and sulfate ion, moreover, no significant interference observed by other anions. Finally, all the experiments were carried out in-house developed sensor and fluidics modules to obtain highly reproducible results.

• Proceedings of the Korea Contents Association Conference
• /
• 2018.05a
• /
• pp.189-190
• /
• 2018

Digital content requires the concept and structure that give us insights into the languages between computers and humans and how humans experience manifested among the flow of characters, images, and voice. Communicology, $Vil{\acute{e}}m$ Flusser's original study, allows us to reconsider and to reconstruct the boundary of human awareness. This paper intends to begin understanding digital content consisting of numerical codes by reviewing communicology. communicology helps to break up pre-existing categories and thinking about new standards. ith the help of information technology. Planning content can be actualized by classifying and reconstructing content that are input/output of senses. The standard of classification is 'boundary' and 'direction,' communication elements that cannot be broken down any further. There is no need to communicate if there is no boundary. The operation of communication is comprised of 'direction.' Considering humankind as the standard, the boundary that takes in stimulation from outside can be seen as senses. Direction can be expressed as input/output. Output assumes that technical pictures receive information. The coordinates for various pre-existing platforms and content and uncovered platforms can be set with a consistent standard. This allows us to escape from the standard of flat content that was activated by sight and rationality at the ideology of characters, to seek a three-dimensional standard that can be vitalized by various senses and irrationality, and to reconstruct the input/output of senses to show the possibility of planning a new platform.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.127-150
• /
• 2020

The World Health Organization (WHO) declared the third pandemic in history after the Hong Kong flu and swine flu. The outbreak of Corona 19 dramatically reduced exchanges between countries, while rapid contagion created a time gap in economic fluctuations by country. In January 2020, the trade dispute between the US and China entered into a consensus phase, but the economic decoupling phenomenon caused by Corona 19 made it difficult for China to balance trade with the US and made it difficult to comply with the terms of the trade dispute agreement between the US and China. President Trump attributed the responsibility for the spread of Corona 19 to China, and pointed out that the cause of the economic downturn was the infringement of Chinese trade secrets and illegal copies, and protectionism arose. As a result, China protested fiercely, and the conflict with the United States deepened. The US has declared trade sanctions on Huawei and SMIC, which are key companies in China's semiconductor industry, and is predicting the risk of a disconnection of the semiconductor value chain between the US and China. The separation of the value chain of the semiconductor industry has the potential to have a big impact on the semiconductor industry, a structure that is highly specialized and monopolized by certain countries and companies in the value chain. This paper aims to deal with the risk of disconnection in the semiconductor value chain between the US and China reignited by Corona 19, the impact and change of the global semiconductor industry value chain, and the response strategies of Korean semiconductor companies.

• Membrane Journal
• /
• v.31 no.2
• /
• pp.101-119
• /
• 2021

The demand for clean water is virtually present in all modern human societies even as our society has developed increasingly more advanced and sophisticated technologies to improve human life. However, as global climate change begins to show more dramatic effects in many regions in the world, the demand for a cheap, effective way to treat wastewater or to remove harmful bacteria, microbes, viruses, and other solvents detrimental to human health has continued to remain present and remains as important as ever. Well-established synthetic membranes composed of polyaniline (PANI), polyvinylidene fluoride (PVDF), and others have been extensively studied to gather information regarding the characteristics and performance of the membrane, but recent studies have shown that making these synthetic membranes conductive to electrical current by doping the membrane with another material or incorporating conductive materials onto the surface of the membrane, such as allotropes of carbon, have shown to increase the performance of these membranes by allowing the adjustability of pore size, improving antifouling and making the antibacterial property better. In this review, modern electrically conductive membranes are compared to conventional membranes and their performance improvements under electric fields are discussed, as well as their potential in water filtration and wastewater treatment applications.

• Journal of the Korean Society of Radiology
• /
• v.16 no.6
• /
• pp.741-749
• /
• 2022

Radiography-Testing that verify the quality of welding structures without destruction are overwhelmingly used in industries, but many safety precautions are required as radiation is used. The workers for Radiography-Testing perform the inspection by moving the Iridium-192 radiation source embedded in the transport container of the gamma-ray irradiator within or outside the facility. The general facility is completely blocked about radiation from the outside with thick concrete, but if it is difficult for worker to handle object of inspection, facilities ceiling can be opened. A general facility may be constructed using a theoretical dose evaluation method because all exterior facilities are blocked, but if the ceiling is open, it is not appropriate to evaluate radiation safety with a simple theoretical calculation method due to the skyshine effect. Therefore, in this study, the radiation safety of the facility was evaluated in the actual field through an ion chamber survey-meter and an accumulated dose-meter called as OSLD, and the actual evaluation environment was modeled and evaluated using the Monte Carlo simulation code as FLUKA. According to the direction of the irradiation, the radiation dose at the facility boundary was difficult to meet the standards set by the regulatory authority, and radiation safety could be secured through additional methods. In addition, it was confirmed that the simulation results using the Iridium-192 source were valid evaluation with the actual measured results.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.77-85
• /
• 2022

Retinaldehyde (RA), vitamin A derivative, is an intermediate between retinol and retinoic acid and has an excellent wrinkle improving effect. In this study, Drug-in-cyclodextrin-in-liposome (DCL) was used to enhance the stability and skin penetration of RA. The complex of RA and hydroxypropyl-beta-cyclodextrin (HP-β-CD) was prepared by the freeze-drying method, and the presence or absence of inclusion of retinal was confirmed by UV-Vis spectrometer, FT-IR and SEM images. RA was captured in HP-β-CD about 95.6% on 1 : 15 (w/w). The retinal-HP-β-CD complex was encapsulated in liposomes using a homomixer and microfluidizer, with an average particle size of 215 ± 4.2 nm and a zeta potential of -31.2 ± 0.5 mv. In the evaluation of the degradation stability of RA, degradation rate of RA-HP-β-CD-liposomes in water was 1.8% higher than RA-liposome (5.8%), RA-HP-β-CD complex (9.7%) and RA alone (37.6%). RA cream (0.05% RA) including RA-HP-β-CD-liposomes was prepared for clinical test with wrinkle-improving efficacy and skin dermis denseness evaluated for 2 or 4 weeks. RA cream showed a significant wrinkle improving effect without skin irritation. In conclusion, it was confirmed that the double stabilization technology using the DCL system contribu tes to the effect of improving skin wrinkles by increasing the stabilization of retinal.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.103-110
• /
• 2024

Lipid nanoparticles (LNPs) are a stable and an effective system that protects cell-impermeable biologically active compounds such as nucleic acids, proteins, and peptides against degradation caused by subtle environmental changes. This study focuses on developing LNPs encapsulating gallic acid (GA), an antioxidant, to effectively prolong the half-life of tetrahexyldecyl ascorbate (THDC), a oil-soluble vitamin C derivative. These LNPs were synthesized in small, uniform sizes at room temperature and pressure conditions using a microfluidics chip. Compared to liposomes manufactured under high pressure and high temperature conditions through conventional microfluidizers, LNPs manufactured through microfluidics chips had excellent dispersion and temperature stability, and improved skin absorption as well as improved oxidative stability of fat-soluble vitamin C derivatives. Future studies will focus on ex vivo and in vivo evaluations to study skin improvement to further validate these results.

• Korean Journal of Clinical Laboratory Science
• /
• v.56 no.3
• /
• pp.207-216
• /
• 2024

Systemic lupus erythematosus (SLE) is a systemic autoimmune disease caused by both genetic and environmental factors. Fludarabine is a selective inhibitor of signal transducer and activator of transcription 1 (STAT1). Recently, STAT1 inhibitors have been considered potential treatments for SLE, due to the relationship between its pathogenesis and STAT1 pathway-mediated cytokines such as interferons. In the current study, we evaluated the therapeutic effects of fludarabine in an SLE animal model and explored its effects on T cell responses. 12-week-old C57BL/6 mice with topically administered R848 exhibited lupus-like phenotypes. Disease activity, such as proteinuria, autoantibody levels, immunoglobulin titers, the histological score, and C3 deposition, greatly improved with fludarabine treatment. In addition, fludarabine inhibited CD4⁺ T cells and T helper 1 (Th1) cells in the spleen and significantly decreased the differentiation of Th1 cells in vitro. These results indicate that Th1 cells play a critical role in the pathogenesis of lupus nephritis (LN). Thus, fludarabine exerted therapeutic effects on lupus animal models by suppressing Th1 cells via STAT1 inhibition. We propose that targeting STAT1 signaling using fludarabine could be an effective therapy for treating LN.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.1
• /
• pp.25-54
• /
• 2015

Syenite is not a common rock, unlike granitic rocks formed the major component of the continental crust. The aim of this study is to decipher the occurrences and detailed descriptive characteristics of the syenite distributed in Sancheong area, and to investigate the petrogenesis of the syenitic magma based on geochemical study. The dominant minerals in syenite are alkali feldspar (usually orthoclase and rarely microcline), plagioclase, amphibole, biotite, and quartz. Syenites are found in a wide variety of colors. The anhedral hornblende and biotite filling the boundary of feldspar and quartz indicate that the hydrous minerals were crystallized lately, and that water was insufficient at the beginning of crystallization in magma. According to the analysis of mineral composition, amphibole in syenite is mostly ferro-edenite, and the pressure is calculated as 3.3~4.9 kb with 11.9~17.3 km of emplacement depth. Biotite and pyroxene are plotted in the region of annite and hedenbergite, respectively. Based on petrochemical studies of major elements, syenite belongs to alkaline series, metaluminous, and I-type. On the other hand, the variation patterns of trace and rare earth elements of syenite differ from the patterns of diorite and granite. In the geochemical characteristics, syenite is different from gabbro-diorite spatially adjacent to syenite, as well as granite. These results suggest that each rock has been generated from the different sources of magma. Additionally, based on the experimental data, the syenitic magma can be formed (1) by the partial melting at a high pressure and dry system, (2) when the initial crystallization minerals to be residue with migration of the residual melts separated from the ascending cotectic magma (3) when fluorine compositions to be plentiful in the protolith and/or at depth of the magma. Based on the petrographic characteristics of the syenite, Sancheong syenitic magma may have been formed by partial melting in a dry system.