• The Journal of the Petrological Society of Korea
• /
• v.8 no.3
• /
• pp.171-182
• /
• 1999

The Myeonbongsan caldera, 10.2X8.0 km, developed within older sequences of sedimentary formations and intermediate composition volcanis in the southern Cheongsong area. Volcanic rocks in the caldera block include lower intermediate volcanics, middle tuffaceous sequences and upper silicic ones. The silicic volcanics, which is named Myeonbongsan Tuff, are composed of crystal-rich ash-flow tuff(300 m) , bedded tuff(30 m) and pumice-rich ash-flow tuff(700 m) in ascending order. Several intrusions dominate the early sequences within the caldera. The caldera collapsed in a trapdoor type when silicic ash-flow tuffs erupted fro major vent area in the caldera. Normal faulting along a ring fault system except the southwestern part dropped the tuffs down to the northrase with a maximum displacement of about 820 m. The Myeonbongsan Tuff is just about 1,030 m thick inside the northeastern caldera, with its base not exposed, and southwestward thinning down. Rhyolitic plug and ring dikes are emplaced along the central vent and the caldera margins, and the ring dikes are cut by plutonic stocks in the southeastern and northwestern parts. The caldera volcanism eviscerated the magma chamber by a series of explosive eruptions during which silicic magma was erupted to form the Myeonbongsan Tuff. Following the last ash-flow eruption, collapse of the chamber roof resulted in the formation of the Myeonbongsan caldera, a subcircular trapdoor-type depression subsiding about 820 m deep. After the collapse, stony to flow-banded rhyolites were emplaced as circular plugs and ring dikes along the central vent and the caldera margins respectively. Finally after the intrusions, another plutons were emplaced as stocks outside the caldera.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.671-682
• /
• 2004

As new and diverse information technologies are being introduced and software complexity is increased, software development cost and efforts are also sharply increased. Component-Based Development (CBD) technology is appealing as a new way to reduce the cost and effort by increasing reusability and maintainability. Component in CBD has variability infernally which enables customization of the component within the specific domain. A component user can easily set up internally variability parts though Required interface which is provided by the component. Enterprise JavaBeans (EJB) is utilized as a commercial standard to implement Java-based components. However, EJB constructs are limited in directly implementing Required interfaces of coarse-grained components［8］. In this paper, we define Required interface and propose interface-storage technique, class-storage technique, interface-generation technique, and Plug -in technique for implementing required interface of component. Interface-storage technique stores variable value in Required interface and class-storage technique take the Bean containg variability as Required interface without modification of component model. Interface-generation technique generates new Bean which takes the role of Required interface for component variability and Plug-in technique sets up component variability that component user plugged-in variable part externally The proposed four techniques conform to the semantics of CBD component interface and enable the implementation of high quality components.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.57-62
• /
• 2015

Manual grafting is a labor-intensive operation and highly susceptible to human error. Development of grafting robot has been considered as an effective alternative to manual grafting. The study was conducted to investigate the grafting efficiency between the domestically produced automated grafting robot and traditional manual grafting performed in a commercial plug seedling greenhouse. Plug seedlings of pepper (Capsicum annuum L.) 'Buchon' and 'Anseongmatchum' were sown as scions and rootstocks, respectively on March 29, 2013. The grafting was performed by a grafting robot, amateur grafters, and professional grafters on May 31, 2013. After grafting, the seedling efficiencies and seedling characteristics were compared in terms of plant height, the number of success as well as failure of seedling grafts produced in an hour. The results showed that plant heights were most uniform in the grafts performed by the professionals that had a 0.6 cm difference whereas an uneven difference of 2.1 cm difference was observed in plug seedling grafted by an amateur. However, plug seedlings grafted by the grafting robot were found to be uniform with 1 cm plant height difference. Moreover, the maximum number of grafting processed plug seedlings per hour (667 plants) was achieved by the grafting robot on compared with the seedlings grafted (466 plants) by the professionals. Furthermore, the least failure rate of 21.7% was noted upon the usage of grafting robot than the manual grafters. Thus, the results demonstrate that the technology of automated grafting robots is the most appealing and can be employed in commercial plug seedling greenhouses to overcome the drawbacks of manual grafting.

• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.699-704
• /
• 2009

Commercially produced 'baby leaves' of Brassica campestris var. narinosa (Chinese cabbage) were used in the present study. Baby leaf vegetables were sown on 128 cell plug trays and harvested 30 days after sowing. For mechanical stress experiments, seedlings were thinned to three per cell, selected for uniformity, and watered at the base. Trays were treated with mechanical stress by stroking back and forth 50 times, using a sheet of A4 paper folded to double thickness. Plants were treated between 12:00 and 14:00 daily for 15-20 days. Harvested baby leaf vegetables were packed in MAP salad bags made of P-plus film, $50{\mu}m$ polypropylene (PP) film, and polyethylene terephthalate (PET) boxes. Fresh weight was well-maintained under P-plus and PP film on storage at $8^{\circ}C$. However, loss of fresh weight occurred quickly in PET boxes, and vegetable quality deteriorated rapidly. Stressed leaves were smaller but thicker, with an increased dry weight ratio. We thus suggest that P-plus or PP film is most appropriate packing for marketing of baby leaf vegetables, which should be stored at $8^{\circ}C$. Our data on baby leaf vegetables also make a significant new contribution in that we demonstrate a positive effect of stress touching on baby leaf processability.

• Journal of Bio-Environment Control
• /
• v.17 no.4
• /
• pp.283-287
• /
• 2008

To investigate the effects of different wavelengths of photosynthetically active radiation on the morphology and leaf color changes of a single tomato (Lycopersicon esculentum) seedling, we stored the seedling at $10{\pm}0.5^{\circ}C$ under eight different wavelengths (peak wavelengths; 405, 450, 505, 545, 600, 645, 680, and 700 nm) with a constant photosynthetic photon flux of $3{\mu}mol\;m^{-2}s^{-l}$ for 28 d. Under the 405, 450, and 505 nm wavelength conditions, the leaves of the seedlings showed vigorous shape with an upright morphology. Rachis elongation was suppressed and hence compact appearance was observed under the 450 and 505 urn conditions. Although the difference in leaf color between before storage and on 28 days after storage was observed under all wavelength conditions, the 405 and 700 um irradiations changed the leaf color to light green. Application of light-emitting diode (LED) light irradiated from around 450 to 545 nm can contribute to vigorous shape with an upright morphology of tomato seedlings during low light irradiation-low temperature storage.

• Journal of the Korean Institute of Gas
• /
• v.19 no.4
• /
• pp.22-28
• /
• 2015

In order to keep the competitiveness of LPG fuel for transportation fuel, the difference in fuel consumption with gasoline and cost for an aftertreatment system should be reduced with continuous development of technology for LPG engine. In the present study, spray-guided type direct injection combustion system, whose configuration is composed of direct injector in the vicinity of spark plug, was employed to realize stable lean combustion. A certain level of nitrogen oxides($NO_x$) emits due to a locally rich mixture regions in the stratified mixture. With the application of EGR system for the reduction of $NO_x$, 15% of $NO_x$ reduction was achieved whereas fuel consumption and hydrocarbon emission increased. By the application of EGR, the combustion speed reduced especially appeared at initial flame development period and peak heat release rates and increasing rates for heat release rate decreased as EGR rate increased due to the dilution effect of intake air.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.1
• /
• pp.19-30
• /
• 2012

The context aware service is the service to provide useful information to the users by recognizing surroundings around people who receive the service via computer based on computing and communication, and by conducting self-decision. But CAS(Context Awareness System) shows the weak point of small-scale context awareness processing capacity due to restricted mobile function under the current mobile environment, memory space, and inference cost increment. In this paper, we propose a mobile cloud context system with using Google App Engine based on PaaS(Platform as a Service) in order to get context service in various mobile devices without any subordination to any specific platform. Inference design method of the proposed system makes use of knowledge-based framework with semantic inference that is presented by SWRL rule and OWL ontology and Jess with rule-based inference engine. As well as, it is intended to shorten the context service reasoning time with mapping the regular reasoning of SWRL to Jess reasoning engine by connecting the values such as Class, Property and Individual which are regular information in the form of SWRL to Jess reasoning engine via JessTab plug-in in order to overcome the demerit of queries reasoning method of SparQL in semantic search which is a previous reasoning method.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.715-728
• /
• 2009

The Enterprise Service Bus based on Java Business Integration is an web service standard and one of the methods for implementing distribution channels of Service Oriented Architecture. Consisting of open source group, extensive venders and users, the ESB based JBI has the problems of ineffectiveness as well as advantages of extensibility of service plug-in. That is, in case users need to use Service plug-in, manual connection of packaging process and sequential distribution method is required. This study, therefore, proposes as a way of trouble-shooting the user-oriented component deployment tool which can manage entire process for deploying The ESB middleware platform to Service unit. At the same time, this study elicited the requirements based on issues of JBI-based ESB and has developed the modeling property, packaging, distribution and evaluation thru Schema analysis of JBI-compatible component. Using the deployment tool this study proposed, users will be able to perform and manage the whole deploying process without additional manual work for connecting component. Not only it is expected that interface based on Graphic User Interface provide usability and convenience but they can also minimize the errors rate through component and route validity verification function provided in deployment tool.

• Horticultural Science & Technology
• /
• v.19 no.2
• /
• pp.140-144
• /
• 2001

Field investigations were initiated to determine possible new 'ssam' vegetable that could be grown during the summer season in highland. Korean 'ssam' means cooked rice in vegetables. The 'ssam' vegetable is called that those leaves has been used for wrapping at meal. Seventeen leafy vegetables were studied, including chard (Beta vulgaris L. var. flavescens DC.), leaf broccoli (Brassica oleracea L. var. italica), Chinese leek (Allium tuberosum Rottl.), Japanese hornwort (Cryptotaenia japonica Hassk), red leaf mustard (Brassica juncea L.), green leaf mustard (Brassica juncea L.), leaf parsley (Petroselinum crispum Nijim), pakchoi (Brassica campestris L. ssp. chinensis Jusl.) tatsoi (Brassica campestris var. narisoma), kale (Brassica oleracea var. acephala), collard (Brassica oleracea var. acephala), Korean mint (Agastache rugosa O. Kuntze), romaine lettuce (Lactuca sativa L. var. longifolia Lam.), red leaf chicory (Cichorium intybus L. var. folisum), red chicory (Cichorium intybus L. var. folisum), green leaf chicory (Cichorium intybus L. var. folisum), and sprouting broccoli (Brassica oleracea L. var. italica). Date of the first harvest in 1999 was July 10th in chard, leaf broccoli, red mustard, mustard, leaf parsley, pakchoi, tatsoi, kale, collard, Korean mint, red leaf chicory, red chicory, green leaf chicory, and sprouting broccoli. Date of the first harvest for Chinese leek, Japanese hornwort, and romaine lettuce was from the middle of June to the late of August. Based on ratings on marketable yield, we found good leaf shape, taste and yield in chard, red leaf mustard, green leaf mustard, pakchoi, tatsoi, romaine lettuce, red leaf chicory, red chicory, and green leaf chicory. Even though the most of all these vegetables were obtained high scores by test panels in shape, taste and quality, but some of them revealed inadequate leaf size as a 'ssam' vegetable. That problem will be solved by control of harvesting time. On the basis of this observation, chard, red leaf mustard, green leaf mustard, pakchoi, tatsoi, romaine lettuce, red leaf chicory, red chicory, and green leaf chicory were rated as promising 'ssam' vegetable by analysis of profits, adaptation, and quality.