• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.2
• /
• pp.130-138
• /
• 2011

This study was carried out to investigate growth characteristics and propagation methods of Clerodendron trichotomum for landscape uses. The results are obtained as follows: In the first place, Korean native C. trichotomum was printed in the "Enumeration of plants in Chosun" in 1937 by Tae Hyun Chung. C. trichotomum is a shrub with round shape. This is noted for its late summer flowers, showy fruit and malodorous foliage. White flowers in long-peduncled cymes bloom in the upper leaf axils from late summer into fall. Flowers are followed by small bright blue fruits, each subtended by a fleshy red calyx. C. trichotomum showed high seed germination rate and greater shoot length in plug box than in normal seeding bed. The rooting rate of C. trichotomum according to cutting date was highest on July 7. The optimum date for cutting was on July 7~10 when the shoots were more hardened. Soil acidity ranged from pH 4.58 to 5.52. The most effective method for rooting of C. trichotomum was treatment with 1,000 ppm IBA on July 7 cuttings, which showed rooting rate of over 90%. Korean native C. trichotomum was successfully propagated through soft cutting and seed.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.106-114
• /
• 2008

This study was performed to analyze the distribution of air current speed, $CO_2$ concentration, and photosynthetic photon flux (PPF) in a closed transplants production system (CTPS) for producing quality transplants. And the effect of PPF on the growth of potato (Solanum tuberosum L. cv. Dejima) plug seedlings was analyzed. Uniformity of the air current speed in CTPS was improved by installing perforated floors in duct for air circulating and by adjusting of air flow rate of the fan connected to air conditioning unit used in this study, Measured $CO_2$ concentrations were measured $409{\pm}13$, $950{\pm}25$, and $1,550{\pm}35\;{\mu}mol{\cdot}mol^{-1}$ for setting values of 400, 950, and $1,550\;{\mu}mol{\cdot}mol^{-1}$, respectively. Uniformity of PPF by adding each one the single fluorescent lamp of 20 W at both ends of the single fluorescent lamps of 40 W was highly improved. While the average PPF measured under the twin fluorescent lamps of 55 W installed at regular intervals of 10 cm was decreased by increasing the vertical distance from the lighting sources, the ratio of average PPF measured at both ends to PPF measured in the center was 74-79%. Five levels ($100{\pm}9$, $150{\pm}14$, $200{\pm}17$, $250{\pm}24$ and $300{\pm}31{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) of PPF were provided to investigate the effect of PPF on plant height, fresh weight and dry weight of potato plug seedlings produced in CTPS. Plant height was decreased by increasing PPF. Maximum fresh weight and dry weight were shown under PPF of $250{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Thus PPF of $250\;{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was enough to produce quality potato transplants under air temperature, photoperiod, and relative humidity of $20^{\circ}C$, 16/8 h, and 70%, respectively. It was concluded that quality indices such as plant height, fresh weight and dry weight could be improved by illuminating of adequate PPF from artificial lighting sources.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.4
• /
• pp.421-429
• /
• 2000

In present, ATM integrated switching system has been developed to a mixed modules that complexed switching system including maintenance, operation based on B-ISDN/LAN service and plug-in module, , which runs on workstation computer system. Meanwhile, workstation has HMI operation system feature including file system management, time management, graphic processing, TMN agent function. The workstation has communicated with between ATM switching module and clients. This computer system architecture has much burden messages communication among processes or processor. These messages communication consume system resources which are socket, message queue, IO device files, regular files, and so on. Therefore, in this paper we proposed new performance modeling with this system architecture. We will analyze the system bottleneck and improve system performance. In addition, in the future, the system has many additional features should be migrated to workstation system, we need previously to evaluate system bottleneck and redesign it. In performance model, we use queueing network model and the simulation package is used PDQ and C-program.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.442-453
• /
• 2007

A model-based integrated development tool for the development of USN application programs is proposed in this paper. The proposed tool has been implemented as a plug-in for Eclipse platform. The tool consists of Graphical User Interface, Modeler, Configuration Information Generator, Validity Checker, Source Code Generator and Templates Storage. Developers can implement USN applications from models of sensor networks using the tool. The developer can implement USN applications by automatic generation of execution code of each node in the sensor network after he/she designs a model of the sensor network. The configuration information of each node is automatically generated from the validated USN model. Then, the execution code is automatically generated using the configuration information and the predefined templates. Through the tool of this paper, developers can easily implement valid USN applications even if they do not know the details of low-level information. Also, a large number of application programs can be generated at once because application programs are generated from sensor network model instead of models of applications. Accordingly, the development effort of USN applications will be decreased and developers can consistently construct USN applications from USN models using the proposed tool.

• Journal of Chest Surgery
• /
• v.43 no.6
• /
• pp.753-757
• /
• 2010

We report hereon a case of double bypass of the esophagus and descending thoracic aorta for the treatment of esophagopleural fistula and aortopleural fistula due to an infected aortic aneurysm after esophageal rupture. A 48 year old man was diagnosed as having esophageal rupture after an accidental explosion. Although he had been treated by esophageal repair and drainage at another hospital, the esophageal leakage could not be controlled and subsequent empyema developed in the left pleura. Further, bleeding from the descending thoracic aorta had developed and he was managed with endovascular stent insertion to the descending thoracic aorta. He was transferred to our hospital for corrective surgery. We performed esophago - gastrostomy via the substernal route, without exploring posterior mediastinum and we let the empyema resolve spontaneously. While he was being managed postoperatively Without any signs and symptoms of infection, sudden bleeding developed from the left pleural cavity. After evaluation for the bleeding focus, we discovered an Infected aortic aneurysm and an aortospleural fistula at the stent insertion site. We performed a second bypass procedure for the infected descending thoracic aorta from the ascending aorta to the descending abdominal aorta via the right pleural cavity. We found leakage at the distalligation site during the immediate postoperative period, and we occluded the leakage using a vascular plug. He discharged without complications and he is currently doing well without any more bleeding or other complications.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.10
• /
• pp.261-268
• /
• 2020

In this paper, we propose an effective software education model for youths with disability. This software education model consists of a four-step process. In the first step, it draws the education curriculum of the software education for different types of disabled youths based on the results of comparative analysis of software education field in special education curriculum. In the second step, it suggests achievement standards for effective software education for the disabled students by classifying students with intellectual disabilities and visual, hearing, and physical disabilities without any multiple disabilities. In the third step, the study developed a modular textbook comprised of unplugged activities using coding robot Albert, physical computing, and block/text coding with the reflection of the characteristic of each type of disability. In the fourth step, it applied the textbook to the school field and educated disabled students focusing on experience to allow them to think logically and by stages about different problems they face in daily lives. In addition, by analyzing the results of youths' performance evaluation and surveys, it was shown that 82.3% of developmental disabilities, 78.8% of visual impairments, 90.9% of hearing impairments, and 78.8% of physically disabilities achieved achievements above the "medium" level. These results prove that the software education model for youths with disabilities proposed in this paper is very effective in improving computational chinking of youths with disabilities.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.4
• /
• pp.1025-1036
• /
• 2016

The conversion of the international standard web utilization HTML5 technology is being developed for improvement of the internet environment based on nonstandard technology like ActiveX. Hyper Text Markup Language 5 (HTML5) of basic programming language for creating a web page is designed to consider the security more than HTML4. However, the range of attacks increased and a variety of security threats generated from HTML4 environment inherited by new HTML5 API. In this paper, we focus on the script-based attack such as CSRF (Cross-Site Request Forgery), Cookie Sniffing, and HTML5 API such as CORS (Cross-Origin Resource Sharing), Geolocation API related with the infringement of the personal information. We reproduced the infringement cases actually and embodied a detection module of a Plug-in type diagnosed based on client. The scanner allows it to detect and respond to the vulnerability of HTML5 previously, thereby self-diagnosing the reliability of HTML5-based web applications or web pages. In a case of a new vulnerability, it also easy to enlarge by adding another detection module.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.10
• /
• pp.61-74
• /
• 2018

In this study, the pull-out behavior of tunnel type anchorage of suspension bridges was analyzed based on results from laboratory size model tests and numerical analysis. Tunnel type anchorage has found its applications occasionally in both domestic and oversea projects, therefore design method including failure mode and safety factor is yet to be clearly established. In an attempt to improve the design method, scaled model tests were conducted by employing simplified shapes and structure of the Ulsan grand bridge's anchorage which was the first case history of its like in Korea. In the model tests, the anchorage body and the surrounding rocks were made by using gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests showed that the tunnel type anchorage underwent wedge shape failure. For the verification of the model tests, numerical analysis was carried out using ABAQUS, a finite element analysis program. The failure behavior predicted by numerical analysis was consistent with that by the model tests. The result of numerical analysis also showed that the effect of Poisson's ratio was negligible, and that a plugging type failure mode could occur only when the strength of the surrounding rocks was 10 times larger than that of anchorage body.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.816-821
• /
• 1997

The hydrodynamics and the liquid flow characteristics were investigated in an internal circulation airlift reactor with a single nozzle as a gas distributor. In an air-water system, the gas holdup in the individual flow zone and the impulse-response curve of tracer were measured at various gas velocities and reactor heights. Experimental results showed that for the higher gas velocity(>about 8 cm/s), the flow behavior of bubbles in the riser was turbulent flow due to strong bubble coalescences and the axial height of dispersion zone of large bubbles having uniform sizes in the downcomer was decreased with increasing gas velocity. And mean gas holdups in the individual flow zone and the reactor were increased with increasing gas velocities and were decreased with increasing heights of the top section of the reactor and it was decreased with increasing the height of the top section and gas velocity. Flow characteristics of liquid in the riser and the downcomer was tend to access to plug flow and the overall flow behavior of liquid was mainly varied with the size of the top section which it was assumed to be perfect mixing zone. In these conditions, liquid circulation velocities were increased with increasing gas velocities and they were higher than those by using other gas distributors.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.303-308
• /
• 2009

This study was conducted to analyze the feasibility of plant growth under low pressure and to investigate the effect of pressure on plant growth. Three levels of pressures (25, 50, and 101.3 kPa (control)) were provided to analyze the growth of Lettuce (Lactuca sativa L.) as affected by low pressure. Photoperiod, air temperature, and photosynthetic photon flux were set at 16/8 h, 26/$18^{\circ}C$, and $240{\mu}mol{\cdot}m^{-2}s^{-1}$, respectively. Growth characteristics of lettuce were measured on 7 days and 14 days after experiment. Leaf length, leaf width, leaf area, and root dry weight of lettuce measured on 7 days under 25 and 50 kPa were significant as compared to the control. Leaf length, top dry matter and root dry matter of lettuce measured on 14 days were significantly different under 25 and 50 kPa. From these results, we confirmed that lettuce could be grown under low pressure. However high relative humidity by evapotranspiration from leaves and growing beds under low pressure caused the condensation on the inner surface of the chamber. Therefore in a low pressure chamber, humidity control is required to maintain the relative humidity at a proper level.