• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.93-100
• /
• 2001

The analysis and control of a new type unsymmetrical slotted self-bearing step motor for small angle control is presented. The motor actuator is used for both motor and bearing functionality without any additional coil windings or electromagnets for bearing functionality. A circular-arc, straight-line permeance model for the fringing effect is presented. An unsymmetrical slotted self-bearing step motor layout and control algorithm are described. A new control current generation method using the electromagnets layout geometry, which needs no additional current for bearing functionality, is proposed. As the result of this analysis the fringing effect largely influences on the system characteristics. especially in torque. Even if the bearing functionality is added into the motor functionality, it is shown that the magnitude of torque is not changed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.875-879
• /
• 2001

마이크로스트립 패치안테나의 대역을 증가시키는 방법이 꾸준히 연구되고 있다. 본 연구에서는 구형 패치 구조에 기생 소자를 더한 형태로 구형 패치 외부에 바(bar)와 밴드(band) 모양의 기생소자를 설치하여 프린징 효과를 최소화 하고자 하였으며, 이로 인한 안테나 효율의 향상과 대역폭을 증가를 시키고자 하였으며, 또한 기생소자의 폭과 방사안테나의 간격을 조절하여 대역폭과 임피던스정합 특성의 변화를 해석하였다. 이를 이용하여 LMDS통신 주파수 대역인 24.6GHz∼28.5GHz에서 공진 대역을 갖도록 설계하였다. 정재파비 2.0 이하를 기준으로 기존의 패치안테나의 중심주파수에 대한 대역 이용율이 수 %인데 반하여, 본 연구에서 제시한 밴드를 설치한 구조의 경우 12.92%로 증가함을 알 수 있고, 또한 본 연구에서 제시한 외부 밴드를 갖는 구조가 급전선로와 패치 안테나와의 정합특성이 월등함을 확인하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.2
• /
• pp.99-105
• /
• 2011

The magnetic circuit analysis excluding flux loss and fringing effect often gives a result with unignorable error, when compared with real system. But, it is not easy to make a complete magnetic circuit model with the loss effects. This paper introduces a relatively simple method to build the model including the flux loss and fringing effect, in which the paths of leaked flux are simplified in terms of circular arcs and straight lines. After modification of the model, the error of about 36 % in maximum between the magnetic circuit analysis and FEM analysis is reduced to about 7 %.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.37-42
• /
• 2000

There has been a constant effort to study methods for increasing the bandwidth of antenna by microstrip patch. In this paper, we propose a special type of the external rectangular patch, for design and analysis of an antenna using a local multi-point distribution system (LMDS). We minimized electromagnetic emissions from the fringing effect. As a result, we obtained an increase in antenna efficiency and frequency bandwidth. We were also able to design the wide band antenna easily, because of the difference in parameter between the aimed and the simulated antenna was reduced greatly. In comparison with the rectangular patch antenna, the banded one has a wider bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.935-942
• /
• 2006

In this paper, a novel theory of realizing the series capacitor with broadside coupled suspended substrate stripline (BCSSS) is proposed. The proposed theory is relatively simple because the method of odd mode analysis is only applied: However, this theory supplies reliable result by considering the line effective width and end effect caused by the fringing field. The simulation results are presented to compare and analyze the characteristics of the ideal lumped capacitor and the coupled line capacitor. Also, the capacitive gap coupled line band-pass filter based on the proposed theory are designed and fabricated. The results prove successfully the validity of the proposed theory.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.2
• /
• pp.39-46
• /
• 1990

In this paper, Rectangular microstrip patch array antenna. relative current of which is distributed to 1:2:2:1, is designed and fabricated by using Tschebyscheff's polynominal expression and is verified by theoretical analysis and experiment. Seeking for more accurate resonant frequency, an equivlent network, which is consisted including feed line and power distribution line, is analyzed by using the analysis method of transmission line mode. As a result of their comparison and examination, such as resonant frequency by fringing effects, by return loss, by experiment, it is conformed that errors are not barely and agreed with each other. is also agreed with a measured values.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.1
• /
• pp.41-48
• /
• 2003

In this paper, a new equivalent circuit for a defected ground structure(DGS) is proposed and adapted to design of a power amplifier for performance improvement. The DGS equivalent circuit presented in this paper consists of parallel LC resonator and parallel capacitance to describe the fringing fields due to the etched defects on the metallic ground plane, and also is used to optimize the matching circuit of a power amplifier. A previous research has also used a DGS for harmonic rejection and efficiency improvement of a power amplifier(1), however, there was no exact equivalent circuit analysis. In this paper, we suggest a novel design method and show the performance improvement of a class AB power amplifier by using the equivalent circuit of a DGS applied to output matching circuit. The design method presented in this paper can provide very accurate design results to satisfy the optimum load condition and the desirable harmonic rejection, simultaneously. As a design example, we have designed a 20W power amplifier with and without circuit simulation of DGS, and compared the measurement results.