• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.363-368
• /
• 2001

It is well known that numerous factors influence the light output of curing units, but many dentists are un aware that the output of their curing lights are inadequate. This study was conducted to evaluate the light in tensity of visible-light curing units in some private dental clinics and hospital dental clinics. In order to determine the maximum light intensity of the curing units, lamps, filters and fiber optic bundles, they were replaced with new ones and light intensity was remeasured. Light intensity was measured by employing a digital radiometer (EFOS model #8000, USA). Light intensity ranged in $29\sim866mW/cm^2$ (below $150mW/cm^2$ ; 17.8%, $150\sim300mW/cm^2$ : 46.6%, above $300mW/cm^2$ ; 35.6%). The replacement of the components increased the light intensity, with maximum increases of 94.8% for lamps, 82.3% for filters, 200.8% for fiber optics and 361.5% for all three parts. According to the manufacturer of radiometer, curing light is considered as unsuitable for use with a reading of above $300mW/cm^2$ by the radiometer. Applying these criteria to the present study, 64.4% of the curing units required repair or replacement. The results of this study indicated that the light intensities of the curing units used in dental practice were lower than optimum level.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.2
• /
• pp.339-348
• /
• 2017

One of the major issues of statistical process control for variables data is monitoring both the mean and the standard deviation. The traditional approach to monitor these parameters is to simultaneously use two seperate control charts. However there have been some works on developing a single chart using a single plotting statistic for joint monitoring, and it is claimed that they are simpler and may be more appealing than the traditonal one from a practical point of view. When using these control charts for variables data, estimating in-control parameters and checking the normality assumption are the very important step. Nonparametric Shewhart-Lepage chart, proposed by Mukherjee and Chakraborti (2012), is an attractive option, because this chart uses only a single control statistic, and does not require the in-control parameters and the underlying continuous distribution. In this paper, we introduce the Shewhart-Lepage chart, and propose the design procedure to find the optimal diagnosis limits when the location and the scale parameters change simultaneously. We also compare the efficiency of the proposed method with that of Mukherjee and Chakraborti (2012).

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.65-76
• /
• 2002

QoS routing is a routing technique for finding feasible path that satisfies QoS requirements required by application programs. Since QoS routing determines such paths in terms of dynamic network state, it satisfies the requirement of applications and increases the utilization of the network. The overhead is, however, generated by routers to exchange the information of the dynamic state of network. In order to reduce this protocol overhead, a timer based update mechanism is proposed in which router checks the change of the network status periodically and network state information is exchanged if the change is greater than a certain value. Using large update period makes, though, routing performance irresponsive to the parameters which determine the update of the network state of the router. In addition to this, large update period may result in inaccurate network state information at routers and cause resource reservation failure. The resource reservation failure generates additional overhead to cancel the resource reservation of the part of the path. In this paper, we propose mechanisms enhancing the existing network state update policy with respect to these two problems. Performance of the proposed schemes are evaluated through a course of simulation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1403-1413
• /
• 2015

An information System Audit by the recognition of a problem and suggestions for solutions for overall matters about constructing and managing information systems is needed in order to contribute to the improvement of an information system's quality and improving the performance of projects. In reality, however, the general cognition is that audit is biased by subjective opinions. For this, an auditor needs to measure the level of recognition of the usability and convenience of the technologies of automating audit by applying TAM in the information system audit, and to analyze the relationship with recognition and availability of the interested parties for the technology (tool) of the audit. By the hypothesis verification result, an auditor needs to present objective corroborative facts that back up the level of recognition and usability for the information technology in the field of audit. This study verified that the phenomenon of technology application can be explained and predicted by applying TAM in the field of audit. Through an empirical study of the recognition level of audit and contractor, the developer suggests that the audit plan stage is similar to the audit corrective action stage, but the audit action stage is different from the audit review stage. This research can verify the audit technology preferred for the availability and intention of use and usability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.570-578
• /
• 2019

In this era of big data, a variety of government organizations are trying to create new added value via Information Integration. Therefore, several projects related to government agencies' information sharing have activated system connection/integration. The risk factors of system operation, however, have increased as the volume of Information Integration System grows. The interference in information sharing is predicted to affect the operation of the agencies, and the issue will grow even worse with massive impact on civil society when the agency operation is interrupted due to system failures in terms of infrastructure, software, data quality, and security. Diverse studies related to the maintenance of Information System have been conducted, but there is currently no evaluation framework for the operational system of Information Integration between various government agencies. In this respect, this study distinguishes each of the Information System components, Data, IT, People, Process, systematizes with Plan-Do-See, and finally presents a maturity model for Information Integration. Nine derived processes were analyzed through interview and questionnaires from Information Integration System officials, further suggesting maturity stage applying CMMI. This model allows diagnosis of the maturity level of an Information Integration System, and is expected to be utilized as resource for improving organizational processes.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.22-27
• /
• 2021

This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1323-1337
• /
• 2020

GEO-KOMPSAT-2A AMI (Advanced Meteorological Imager) radiometric calibration evaluation is an essential element not only for functional and performance verification of the payload but for the quality of the sensor data. AMI instrument consists of six reflective channels and ten thermal infrared ones. One of the key parameters representing radiometric properties of the sensor is a SNR (Signal-to-Noise Ratio) for the reflective channels and a NEdT (Noise Equivalent delta Temperature) for the IR ones respectively. Other important radiometric calibration parameters are a dynamic range and a gain value related with the responsivity of detectors. To verify major radiometric calibration performance of AMI, an offline radiometric evaluation tool was developed separately with a real-time AMI data processing system. Using the evaluation tool, validation activities were carried out during the GEO-KOMPSAT-2A In-Orbit Test period. The results from the evaluation tool were cross checked with those of the HARRIS, which is the AMI payload vendor. AMI radiometric evaluation activities were conducted through three phases for both sides (Side 1 and Side 2) of AMI payload. Results showed that performances of the key radiometric properties were outstanding with respect to the radiometric requirements of the payload. The effectiveness of the evaluation tool was verified as well.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.29-40
• /
• 2022

This study uses the bidet 4D double diamond design process model to propose an improvement for "senior-oriented bidet product service design" that reflects the characteristics and needs of seniors. This study was based on the product service system concept. To this end, qualitative research on seniors was conducted to derive user value factors, and, based on this, product service ideas were discovered, and a prototype reflecting the usefulness review of a working-level expert group was proposed. First, a "smart application service for user-customized function setting guide" was proposed. A bidet incorporating Internet of Things technology and a smart phone are linked to provide an app service that automatically interprets user characteristic information and information on bidet products to guide customized functions. Second, a control panel and remote control user interface to "user-oriented product service interface" was proposed. In consideration of the usability and cognitive ability of seniors, a simple and intuitive physical user interface such as a configuration centered on main functions, button arrangement according to task sequence, and a touch screen remote control was presented. Third, we proposed a "bidet care service linked with products and health/hygiene care" that provides a wide range of services such as user health and hygiene, cleanliness, entertainment, etc., in addition to regular bidet product service. This study proposed a product-based service design methodology that can improve user experience and relationship quality by discovering and improving the pain points and needs of users (seniors) in the process of using bidet products (before, during, and after use).

• The Journal of KAIRB
• /
• v.5 no.1
• /
• pp.14-20
• /
• 2023

Purpose: To obtain fundamental data on selection tools for an internal audit and develop a new guideline. We scored the indicated points from the internal audit, identified the research progress and problems that occurred, and confirmed the validity of the risk factors involved. Methods: Of the 63 internal audits conducted by Keimyung University Dongsan Hospital from 2014 to 2021, we analyzed 55 clinical trials with an inspection checklist. We excluded 8 that failed to transfer data and refused to comply with the internal audit. The statistical summary of the collected data was verified and interpreted by using frequency analysis and a chi-square test. Result: Of total 55 cases included in the internal audit, sponsor-initiated trial (SIT) was 63.6% (vs. investigator-initiated trial [IIT]), clinical trial for investigational drug was 71.0% (vs. nonclinical or clinical trial for investigational device), domestic multicenter trial was 60.0% (vs. single center or multinational multicenter trial), and trial requisition for MFDS approval was 69.1% (vs. exception for MFDS approval). The 10 areas of the clinical trial inspection checklist (reports, protection of subjects, compliance with protocols, records, management of investigational drug and/or device, delegation of duties, qualification of investigators, management of specimen, contract-agreement and approval of protocols, and preservation of recorded documents) were weighted between 2 to 5 points. The average of the total points was 16.09±13.2 and 20 clinical trials were above the average. As a result of comparing the average of the total points weighted by year, the highest score was in 2020. The 4 factors that play significant roles in determining the internal quality were (1) principal subjects that initiated the clinical trials (p=0.049), (2) type (p=0.003), (3) phase of clinical trials (p=0.024), and (4) number of registered subjects reported at the time of continuing deliberation (p=0.019). Of the 10 areas of the clinical trial inspection checklist, 'record' was the most inappropriate and insufficient. We found more indicated points; the quality of performance declined in IIT, nonclinical trials, and other clinical trials that were not in phase I1-IV4, and the study of more than 30 registered subjects at the time of continuing review. Conclusion: If an institution has an internal audit selection tool that reflects the aforementioned risk factors, it will be possible to effectively manage high-risk studies; thereby, contributing to an efficient internal audit and improving the quality of clinical trials.

• Journal of the Korea Institute of Construction Safety
• /
• v.6 no.1
• /
• pp.7-11
• /
• 2024

Pump car is an equipment that transports concrete products as needed to the place where they are poured. In order to pour a large amount of concrete in a short period of time, using a pump car is the most efficient in terms of economic efficiency and quality control. However, recently, many casualties have occurred due to boom damage during concrete pouring, so this study suggests that improvements are needed in the equipment manufacturing stage, inspection standards for old equipment, and equipment rental system. The reason is that, as a result of the finite element analysis of the pump car, the significant stress acting at the second stage of the boom and the maximum stress at the top of the boom were found to be 895.39 MPa, and M.S. Since it was evaluated the lowest at 0.04, the need for reinforcement was recognized. And it was confirmed that the 2nd stage boom was the most stressful and vulnerable part of the 1st to 5th stage booms. Therefore, it is necessary to increase the thickness and rigidity of members at the design and manufacturing stage, and to reinforce the steel plates of currently used equipment. In addition, it is urgent to establish a system that makes non-destructive testing mandatory for all general construction machinery and holds inspection agencies responsible for missing boom defects during non-destructive testing and regular inspections.