• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.156-163
• /
• 2019

This study examined the recycling system of a foreign lung excreta system. First, the measures for promoting the recycling of a pulmonary digestive system were as follows. Second, a manual considering specialization, such as the construction of a recycling treatment system of fire extinguishers and the collection, transportation, recycling, publicity, and education of fire extinguishers, were developed. Third, an education and counseling system is needed to overcome the lack of experience and technical support for systematic and safe disposal of pulmonary digestive system. Fourth, to promote the recycling of fire extinguishers in the government and fire extinguisher related organizations, it is necessary to prevent environmental pollution and recycle parts to reduce the waste of resources and improve the fire extinguisher quality by fostering a fire safety industry and policy support.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.31-38
• /
• 2019

The main purpose of this study is to analyze the impact of the cost estimates on the construction work in residential apartment housing facilities. The planning work of facility construction is roughly divided into five main tasks which are further broken down into the following: process plan (P1-P6), construction plan (C1-C5), environmental management plan (E1-E4), quality management plan (Q1-Q5) and the safety management plan (S1-S5). In this study these tasks were classified into 25 detailed planning duties and a statistical analysis was performed on each one to determine its impact on cost. Finally this study derives from major planning tasks for effective cost management through correlation between planning tasks, cost indicators and t-test.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.48 no.4
• /
• pp.41-54
• /
• 2020

This study was conducted to provide basic data for a transparent and fair bidding system by identifying problems and suggesting improvement measures through an analysis of the bidding status for construction projects and service-related landscaping of multi-family housing. To this end, we used the data from the "Multi-Family Housing Management Information System (K-apt)" that provides the history of apartment maintenance, bidding information, and the electronic bidding system to examine the winning bid status and amount, along with the size and trends of the winning bids by year, and the results of the selection of operators by construction type. As a result, it was found that out of the total number of successful bids (36,831), 4.4% (16,631) were in the landscaping business, and the average winning bid value was found to be about 24 million won. According to the data, 73% of the landscaping cases were valued between 3 million won and 30 million won, and 58.6% of the cases were in the field of "pest prevention and maintenance". 36% of the total number of bids were awarded from February to April, with "general competitive bidding" accounting for 59.8% of the bidding methods. As for the method of selecting the winning bidder, 55% adopted the "lowest bid" and "electronic bidding method," and 45% adopted the "qualification screening system" and "direct bidding method." As an improvement to the problems derived from the bidding status data, the following are recommended: First, the exception clause to the current 'electronic bidding method' application regulations must be minimized to activate the electronic bidding method so that a fair bidding system can be operated. Second, landscaping management standards for green area environmental quality of multi-family housing must be prepared. Third, the provisions for preparing design books, such as detailed statements and drawings before the bidding announcement, and calculating the basic amount shall be prepared so that fair bidding can be made by specifying the details of the project concretely and objectively must be made. Fourth, for various bidding conditions in the 'business operator selection guidelines', detailed guidelines for each condition, not the selection, need to be prepared to maintain fairness and consistency. These measures are believed to beuseful in the fair selection of landscaping operators for multi-family housing projects and to prepare objective and reasonable standards for the maintenance of landscaping facilities and a green environment.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.147-156
• /
• 2024

This study aims to reduce CO₂ generated during the manufacturing process by using limestone (CaCO₃), a carbonate mineral used in the production of cement clinker, as a decarbonated raw material that does not contain CO₂. Among various industrial by-products, we attempted to use cement paste attached to waste concrete. In general, limestone for cement must have a CaCO₃ content of at least 80% (CaO, 44% or more) to ensure the quality of cement clinker. However, the CaO content of waste concrete fine powder is about 20% on average, so in order to use it as a cement clinker raw material, the CaO content must be increased to more than 35%. Therefore, by using the difference in hardness of the mineral composition of waste concrete fine powder to selectively crush CaO type minerals with relatively low hardness, classify and sieve, the CaO content can be increased by more than 35%. Accordingly, in this study, we experimentally and statistically reviewed and analyzed the optimal conditions for efficiently separating CaO and SiO₂ and other components by selectively pulverizing minerals containing relatively low CaO through a grinding process. As a result of the optimal grinding conditions experiment, it was found that the optimal conditions were a grinding time of less than 5 minutes, a type of material to be crushed of 30 mm, and an amount of material to be crushed of 1.0 or more. However, it is judged that it is necessary to review pulverized materials of mixed particle sizes rather than pulverized products of single particle size.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.128-134
• /
• 2024

Asphalt-based waterproofing materials for bridge decks face issues such as softening or liquefaction of the material during the process of pouring hot asphalt concrete on top of the waterproofing layer. This leads to instability and reduced thickness of the waterproofing layer. To address these problems, new solutions beyond the existing materials, including the development and adoption of new materials, are required. Therefore, this study investigates the properties of MMA(Methyl Methacrylate) coating waterproofing material, which meets the basic physical properties for bridge deck waterproofing. We examined the overall quality standards in a system where the substrate concrete, waterproofing material, and paving layer are integrated. The study confirmed the applicability of MMA coating waterproofing material on bridge decks. The results indicate that a stable application of MMA coating waterproofing material for civil engineering structures' bridge decks can be achieved with a mix ratio of hard MMA resin : soft MMA resin : powder = 6 : 34 : 60. Additionally, when using emulsified asphalt with hardening characteristics for the adhesion between the dissimilar materials of MMA waterproofing and asphalt concrete, it is expected to meet the minimum quality standards of the Ministry of Land, Infrastructure, and Transport's 'Guidelines for Asphalt Concrete Pavement Construction (2021.07)'.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.88-95
• /
• 2007

Domestic elevator accidents which are related to human life such as death are occurring steadily. This research measured and analyzed for the quality of power source which has possibility to be associated with fault and malfunction of elevator equipment although it is not direct cause examination. In conclusion, we acquired the result that there is possibility that the quality of power source(Sag, Interruption, Harmonic, Electromagnetism emission waveform, Static electricity etc) has an effect on movement of elevator through examination of three elevator facility models and suggested measures for it. Accordingly, this research result will be used as data to suggest establishment of elevator examination regulations and KS regulations for domestic elevator industry and the least safety of household using elevator.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.24-35
• /
• 2023

Recently, the Ministry of Land, Infrastructure and Transport presented the '6th Construction Technology Promotion Basic Plan' and 'Smart Construction Revitalization Plan (2022.7.20)'. Off-Site Construction (OSC), which involves construction and production of PC (Precast Concrete) and Modular, etc., has advantages in shortening the construction period, reducing costs, improving quality, reducing construction waste, and reducing safety accidents. However, the construction cost is high compared to the traditional RC construction method, which has hindered its utilization and spread. In this study, OSC utilization was improved. An economic analysis indicator and methodology that can support decision-making in the planning and design stages for multi-unit housing were proposed. The factors used in the economic analysis of OSC (based on the PC method) of apartment houses were reviewed. As for the indicators used in the cost and benefit section, 'Construction Period', 'Disaster Occurrence', 'Waste Generation', and 'Greenhouse gas Emission', which reflect the technical advantages of OSC, were derived. In addition, a scenario analysis was conducted based on actual apartment housing case data for the presented economic analysis indicators and benefit calculation standards. The level of benefit that offsets the difference between the existing RC construction method and the construction cost was reviewed. In future studies, it will be necessary to conduct additional case studies to apply the measurement criteria for detailed indicators and supplement the benefit indicators.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.314
• /
• pp.58-63
• /
• 2003

휴대전화, PC, 브로드밴드(ADSL, FTTH) 등 가정 내에서의 IT기기 및 네트워크의 보급이 급속하게 진전되고 있다. TV와 에어콘 등 가전제품의 IT화가 진행되어 가정 내에서 네트워크를 형성함은 물론 외부 네트워크에 상시 접속되는 세계가 실현되어 가고 있다. 네트워크 접속에 대응하는 네트가전이 보급되면 가전기기 간의 연대 및 외부와의 정보통신에 의해 가전제품의 기능과 성능을 최대한으로 발휘할 수 있게 되어 생활환경, 편리성이 크게 향상됨과 아울러 성(省)에너지화에도 큰 효과를 나타낸다. 네트가전은 TV, VTR, DVD등의 AV계(系), 냉장고와 세탁기 등의 기기계, 태양광발전시스템과 전기온수기 등의 설비계로 분류된다. AV계에서는 디지털정보의 다운로드와 기억에 의해 다양한 고품질의 영상음향에 둘러싸인 세계가 탄생하게 된다 기계계의 네트가전에서는 홈서버 경유로 외출 장소에서 기기의 상태를 파악하여 제어하는 것이 가능해진다. 설비계에서는 설비 간의 연대에 따라 에너지절약 운전과 최대전력량의 제어에 의한 코스트절약이 실현된다. 네트가전을 이용한 홈네트워크 실현을 위해서는 고객이 쉽게 다를 수 있으며 만족할 수 있는 기능과 서비스, 성(省)배전$\cdot$저(低)코스트의 네트워크, 기기가 외부에서 간단히 제어될 수 있는 고신뢰성 인터페이스의 실장(實裝)과 표준화, 디지털 컨텐츠의 유통을 촉진하기 위한 컨텐츠 권리보호제도 정비가 필요하게 된다. 미쓰비시전기는 ''언제나, 어디에나, 누구에게도'' 가전제품을 편리하게 사용될 수 있는 유비쿼터스 사회를 실현하기 위하여 AV, 설비$\cdot$기기, 컴퓨터의 모든 분야에 대응한 가전기기, 네트워크 관련기기의 개발을 진행해 나감은 물론 주택을 이용한 실증시험을 실시하여 소비자 메리트의 본질적인 추구를 위해 계속 추진해 나가고 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.5 s.347
• /
• pp.45-50
• /
• 2006

As a settlement for the fiber access, the FTTH is an ideal mode for providing various high-bandwidth value added services including high definition IPTV to broadband users, and KT, the largest incumbent of Korea, started FTTH service from 2005. For FTTH deployment, it needs a cost-effective solution including reliability and maintenance costs. This paper analyzes the characteristics and technical issues for the main components of outside plant in general household area.

• Journal of the Korean housing association
• /
• v.27 no.6
• /
• pp.137-144
• /
• 2016

In modular architecture, manufacturing drawing which includes whole information for modular unit production is essential since works for modular unit have to be performed in manufacturing factory not construction field. Although the manufacturing drawing is important as known it is insufficient to utilize the manufacturing drawing in modular architecture project and this makes modular unit low-quality with re-work and work time delay. To prevent low-quality modular unit caused by insufficient manufacturing drawing, in this research firstly manufacturing drawing's current situation and error cases in manufacturing phase of past modular housing project were analyzed, and correlation between reduction of errors occurance frequency and improving manufacturing drawing was verified. Secondly manufacturing drawing improvement factors were deducted in interior, furniture, mechanical work phase which errors' occurance rate is high and the way of deducting manufacturing drawing lists and contents were suggested with light-weight work as an example in case of new type of errors occurance. A series of research process can contribute to good-quality modular unit by errors reduction. As a result of research, about half of errors occurance can be reduced with suggested manufacturing drawing improvement factors. And the manufacturing drawing process can contribute to modular production which have uniform quality.