• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.5
• /
• pp.45-45
• /
• 2001

본 논문에서는 높은 회절 효율과 균일도를 갖는 컴퓨터 생성 홀로그래픽 디퓨저를 수정된 반복 푸리에 변환 알고리즘으로 설계하였다. 컴퓨터 생성 홀로그래픽 디퓨저를 설계하기 위한 새로운 방법으로 위상형 홀로 그램들을 대칭, 결합시킴으로서 계산시간을 감소시켰고 재생되는 신호 영역을 확장하였다. 설계한 16 위상형 홀로그래픽 디퓨저는 85.20%의 높은 회절 효율과 2.43%의 균일도, 18.97［㏈］의 평균 신호대 잡음비를 나타내었다. 또한, 컴퓨터 생성 홀로그래픽 디퓨저와 128 단계를 갖는 유사 랜덤 위상 디퓨저를 회절 효율과 균일도 측면에서 비교하였고, 홀로그래픽 디퓨저와 차세대 디스플레이용 소자로서 유용하게 이용될 수 있음을 제시하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.33-37
• /
• 1991

The problem of radiation from a flanged parallel-plate waveguide is re-examined. The technique of the Fourier transform is used to represent the radiation fields in the spectral domain. The simultaneous equations for the radiation field coefficients are formulated and solved to give an asymptotic seolution. The asymptotic series solution is compared with other results, thus clarifying the discrepancy among different numerical approaches.

• The Journal of Engineering Geology
• /
• v.14 no.2
• /
• pp.147-168
• /
• 2004

Purpose of this study is to quantitatively characterize the fracture roughness which was measured with a confocal laser scanning microscope. The roughness discrete data measured by confocal laser microscope were analyzed by spectral analysis and fast Fourier transform (FFT).The roughness data by used noise reduction filter were applied for fractal analysis to describe roughness features quantitatively. Artificial fractures created by Brazilian test on granites were used to measure fracture roughness under the confocal laser scanning microscope. Measurements were performed along three scan lines on each fracture surface. 36 scan lines were determined on 12 specimens in total. Features of roughness showed that coarse and medium grained granites tend to more rough features than those of fine grained granites. Continuous analog data of roughness is possible to described as discrete data of measure roughness with a fixed interval under the confocal laser microscope. Results of FFT with the measured data showed the highest values on the second harmonics. Distribution of average amplitude of second harmonics was observed 0.9853 in coarse grained granite, 1.0792 in medium grained granite and 0.6794 in fine grained granite. This indicates that the larger roughness has the higher energy of harmonics as the result of fractal analysis in low frequency zone.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.400-407
• /
• 2003

In this paper an optical encryption system, which can decrypt the original image by using the autocorrelation terms of a JTC, is proposed. Unlike the classical JTC, the joint input plane of the proposed system is composed in a frequency domain not a spatial domain, thus it needs only one Fourier transformation. To use like this, the phase component appeared in the output plane of JTC should be considered. We presents the effect of phase and provides the solution. An original image is encrypted to a complex-valued random image. The original image is reconstructed using the autocorrelation terms which is the main drawback of JTC, therefore the proposed system is more suitable for JTC and real time processing. By computer simulation and optical experiment, the analysis for the phase effect and the performance of the proposed system are confirmed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.11
• /
• pp.175-182
• /
• 2012

The scattered radiation always occurs when X-ray strikes the object. To absorb the scattered X-rays, the antiscatter grids are used, however these grids images are superimposed in the projection radiography images. When those images are displayed on the monitor, moir$\acute{e}$ patterns are overlapped over the images and disturb the anatomical informations. Most of the researches performed to date removed the grid noises by calculating or observing those frequencies in one dimensional frequency domain, two dimensional wavelet transform or Fourier transform. Those methods filtered not only the grid noises but also diagnostic informations. In this paper, we proposed the combined wavelet packet-Fourier method to remove the grid artifact in CR images. For the phantom image, the proposed method achieved from 5.2 to 7.4 dB better than others in SNR and for CR images by rejecting the grid noise bands effectively while leaving the remaining bands unchanged, the loss of images could get minimal results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.181-186
• /
• 2012

Recently there has been many active researches on searching similar sequences from data generated with the passage of time. Those data are classified as time series data or sequence data and have different semantics from scalar data of traditional databases. In this paper similar sequence search retrieves sequences that have a similar trend of value changes. At first we have transformed the original sequences by applying DFT. The converted data are more suitable for trend analysis and they require less number of attributes for sequence comparisons. In addition we have developed a region-based query and we applied bitmap indexes which could show better performance in data warehouse. We have built bitmap indexes with varying number of attributes and we have found the least cost query plans for efficient similar sequence searches.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.69-80
• /
• 2012

In this paper, we studied the time-domain measurement and analysis techniques using a network analyzer for characterization UWB antenna link radiating impulse signal. For this purpose, we developed the CZT(Chirp z-Transform) algorithm which has characterized zoom-in function and transformed the acquired data from network analyzer to time domain format. Using the CZT algorithm, we proves that it would be better efficient and more faster than the DFT for analyzing the waveform and also be able to zoom-in the arbitrary region.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.1
• /
• pp.33-37
• /
• 2011

This paper presents the frequency spectral analysis based on FFT of the infrared ray fire thermal image, it is an object to deduce the conditions for determining fire alarm through the image processing with the frequency domain. After the candidate regions are separated by using pre-defined brightness value, the fast fourier transform is performed for consecutive infrared thermal images, the frequency spectral analysis of the thermal image analyzed DC and AC frequency distribution. The fire criterion of the thermal image was presented based on the analyzed result and a practicality was confirmed through the computer simulation.

• Proceedings of the KIEE Conference
• /
• 2006.05a
• /
• pp.83-85
• /
• 2006

변압기 및 GIS 설비 내의 부분방전(Partial Discharge: PD) 발생 시 과도 UHF 신호들이 발생하고 그 신호들은 탱크 안에서 공진한다. 한 개 이상의 PD소스가 존재하고 간섭을 포함 할 때, PD에서 발생하는 본 신호들을 정확히 분류 할 수 있는 능력은 진단의 수준을 높일 것이다. 고속 푸리에 변환(FFT)은 주파수변화가 많을 시에, 주요 주파수의 특징 구별이 어렵다. 즉 푸리에 변환 적용 시 noise의 불규칙적인 파형으로 원 신호와의 구분이 어렵다. 그래서 시간과 주파수영역 모두에서 좋은 해상도를 나타내는 웨이블릿을 사용하였다. 변압기 및 GIS 설비 탱크에서 다른 위치의 PD소스로부터 UHF신호들을 인지하는 것에 대하여 웨이블렷에 기초된 방법은, 단지 한 개의 UHF 센서로 신호를 받았을 경우에도 묘사되어진다. UHF PD신호들의 시간-주파수 특성은 웨이블릿 변환으로부터 설립되고, 신호의 에너지 분포 mapping의 의미로 제공되어 진다. 유사함수(similarity function)는 다양한 웨이블릿 계수분포 사이에서 유사성의 측정을 제공하기 위하여 정의된다. 실험으로 측정된 데이터를 통하여 다중부분방전의 유무를 판단하고자 한다.

• Communications for Statistical Applications and Methods
• /
• v.16 no.3
• /
• pp.409-419
• /
• 2009

In this article, an explicit solution of the EM algorithm for the image deburring is presented. To obtain the restore image from the strictly iterative EM algorithm is quite time-consumed and impractical in particular when the underlying observed image is not small and the number of iterations required to converge is large. The explicit solution provides a quite reasonable restore image although it exploits the approximation in the outside of the valid area of image, and also allows to obtain the effective EM solutions without iteration process in real-time in practice by using the discrete finite Fourier transformation.