• Journal of the Mineralogical Society of Korea
• /
• v.24 no.1
• /
• pp.19-29
• /
• 2011

Clay mineral assemblages of core PC25A collected from the northern part of the Aleutian Basin in the Bering Sea were examined in order to investigate changes in sediment provenances and transport pathways. Ages of core PC25A were determined by both Last Appearance Datum of radiolaria (L. nipponica sakaii; $48.6{\pm}2\; ka$) and age control points obtained by the correlations of $a^{\ast},\; b^{\ast}$, and laminated sediment layers with the adjacent core PC23A, whose ages are well constrained. The corebottom age of core PC25A was calculated to be about 57,600 yr ago and core-top might be missing during coring execution. Average contents of smectite, illite, kaolinite, and chlorite during the last glacial period are 11% (5~24%), 47% (36~58%), 13% (9~19%), and 29% (21~40%), respectively. Clay mineral assemblages of the last glacial period are characterized by higher illite and lower smectite contents than those of core MC24 representing the modern values. Illite-rich clay sediments during the warm Early Holocene were transported from the northern part of Alaska continent (Province 1) through the ice-melt waters. During the deglacial period (B${\phi}$lling-All${\phi}$rod) of MIS 2, clay-sized particles seemed to be also transported by ice-melt waters mainly from Province 2 and Province 3 located farther south than Province 1. Higher smectite content during the Last Glacial Maximum is attributed to increased amounts of clay particles from the adjacent Alaska Peninsula (Province 4). From the early to the middle MIS 3, illite and smectite contents decreased, whereas chlorite content increased. With the low sea level standing during MIS 3 the supply of clay sediments from Province 2 and Province 3 was most likely intensified. Changes in clay mineral assemblages of core PC25A located in the northern part of the Aleutian Basin in the Bering Sea are closely related to the change of surface current system caused by sea level variation during the last glacial period.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.5
• /
• pp.663-676
• /
• 1996

Physical properties and textural parameters of thirty-five piston tore samples recovered from the southeastern coast of Korea (Korea Strait), were investigated using the autopycnometer. The physical properties (porosity, water content, wet bulk density, dry bulk density, gram density, and void ratio) were measured at rather uniform intervals along each core. Sediment texture (grain size, sand, silt, and clay contents) was also measured at the same subbottom depth. The measured and calculated results are; mean grain size $0.57\~8.09\phi(average:3.67\phi)$, porosity $26\~81\%\;(average:\;55\%)$, water content $16.7\~61.4\%(average:\;31.6\%)$, wet bulk density $1.37\~2.18g/cm^3\;(average:\;1.85g/cm^3)$, dry bulk density $2.55\~3.11g/cm^3\;(average:\;2.35g/cm^3)$, grain density $2.40\~3.10g/cm^3\;(average:\;2.85g/cm^3)$, and void ratio $0.56\~2.54$ (average: 0.94). The sediment texture generally coincides well with the bathymetry indicating the influence of Pleistocene-Holocene sea level changes. Also the contours of physical properties are closely related to the sediment texture. Fluctuation of physical properties are similar to the textural variation. It seems that sediment texture is a significant factor in determining physical property in this study area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.353-360
• /
• 2010

The result of analysis of the observed temperature data by the Serial Oceanography Investigation of National Fisheries Research and Development Institute (NFRDI) during last 41 years from 1969 to 2008 showed that sea surface temperatures in the East, West and South Sea of Korea were clearly increased. In case of 100m depth, temperature was increased in the South Sea of Korea, but it was decreased in the East Sea. Especially, the temperature around the coastal area in the East Sea was significantly decreased by the spatial distribution of long-term change of temperature on 100m depth. It should lead to the decreasing trend in the long-term change of temperature on 100 m depth in the entire East Sea. The increasing trend was clearly larger in wintertime than in summertime by a factor of about 2 It means that the long-term increasing trend of sea surface temperature in the Korean Waters is usually caused by the distinctive increasing trend in wintertime. As the results of the analysis of air temperature and wind speed on the 6stations around the coastal area in the Korean Waters, air temperature was found to be continuously increased, but wind speed to be gradually decreased in winter. The weakness of vertical mixing by decreasing of wind speed caused to make the surface mixed layer shallow. it could be considered that the increasing trend of surface temperature was caused by weak mixing between surface and intermediate layers.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.285-294
• /
• 2000

In order to determine the horizontal and vertical distributions of metals and prospect the recent metal pollution history in Nakdong Estuary, we took surface and core sediments. Maximum value of organic matter occurs at the upstream site located 4 km from Nakdong barrage, and the concentration of trace metals (Zn, Cu, and Pb etc.) decrease seaward in the estuary. The sedimentation rates, based on $^{210}$Pb$_{ex}$ and $^{137}$Cs activities, were 0.34 cm/yr in inside of barrage (core 1) and 0.25 cm/yr in Changrim (core 4). Sediment mixing layer does not exist in core 1, where anoxic condition is known to be prevail. The topmost sediment layer of core 4 (<3.5 cm) is severely mixed. At sites 1 and 4, concentrations of Cu slowly increased during the period of 1920-1970, rapidly increased during 1970-1990, and followed by slight decrease after 1990. Zn contents increased in early 1960s and peaked in 1993, and followed by decrease after 1990s. Pb has increased continuously since early 1970s. At the downstream of the barrage, Cu and Zn have increased in the topmost layer. The trend of increase of Cu is evident after 1950 (11 cm in sediment depth). Overall trend of heavy metal concentration clearly indicates the pollution has been increasing after the construction of the barrage.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.3
• /
• pp.119-130
• /
• 2015

Impacts of Argo temperature assimilation on the analysis fields in the East Sea is investigated by using DAESROM, the East Sea Regional Ocean Model with a 3-dimensional variational assimilation module (Kim et al., 2009). Namely, we produced analysis fields in 2009, in which temperature profiles, sea surface temperature (SST) and sea surface height (SSH) anomaly were assimilated (Exp. AllDa) and carried out additional experiment by withdrawing Argo temperature data (Exp. NoArgo). When comparing both experimental results using assimilated temperature profiles, Root Mean Square Error (RMSE) of the Exp. AllDa is generally lower than the Exp. NoArgo. In particular, the Argo impacts are large in the subsurface layer, showing the RMSE difference of about $0.5^{\circ}C$. Based on the observations of 14 surface drifters, Argo impacts on the current and temperature fields in the surface layer are investigated. In general, surface currents along the drifter positions are improved in the Exp. AllDa, and large RMSE differences (about 2.0~6.0 cm/s) between both experiments are found in drifters which observed longer period in the southern region where Argo density was high. On the other hand, Argo impacts on the SST fields are negligible, and it is considered that SST assimilation with 1-day interval has dominant effects. Similar to the difference of surface current fields between both experiments, SSH fields also reveal significant difference in the southern East Sea, for example the southwestern Yamato Basin where anticyclonic circulation develops. The comparison of SSH fields implies that SSH assimilation does not correct the SSH difference caused by withdrawing Argo data. Thus Argo assimilation has an important role to reproduce meso-scale circulation features in the East Sea.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.17 no.4
• /
• pp.243-251
• /
• 2012

Real-time monitoring for environmental factors(temperature, salinity, chlorophyll, etc.) and carbonate components( pH and $fCO_2$) was conducted during 5-6th of July, 2012 at a seaweeds farm in Gijang, Busan. Surface temperature and salinity were ranged from $12.5{\sim}17.6^{\circ}C$ and 33.7~34.0, respectively, with highly daily and inter-daily variations due to tide, light frequency(day and night) and currents. Surface $fCO_2$ and pH showed a range of $381{\sim}402{\mu}atm$ and 8.03~8.15, and chlorophyll-a concentration in surface seawater ranged 0.8~5.8 ${\mu}g\;L^{-1}$. Environmental and carbonate factors showed the highest/lowest values around 5 pm of 5th July when the lowest tidal height and strongest thermocline in the water column, suggesting that biological production resulted in decrease of $CO_2$ and increase of pH in the seaweed farm. Processes affecting the surface $fCO_2$ distribution were evaluated using a simple budget model. In day time, biological productions by phytoplankton and macro algae are the main factors for $CO_2$ drawdown and counteracted the amount of $CO_2$ increase by temperature and air-sea exchange. The model values were a little higher than observed values in night time due to the over-estimation of physical mixing. The model suggested that algal production accounted about 14-40% of total $CO_2$ variation in seaweed farm.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.3
• /
• pp.111-118
• /
• 2004

An ocean buoy was deployed 10 km off Donghae city, Korea at a depth of 130 m to measure meteorological (air pressure, air temperature, wind speed, wind gust, wind direction, relative humidity) and oceanographic data (water properties and currents in the whole column) in real-time. The buoy recorded a maximum wind gust of 25 m/s (10 minutes' average speed of 20 m/s) and a minimum air pressure of 980 hPa when the eye of typhoon Maemi passed by near the Uljin city, Korea at 03:00 on 13 September 2003. The wave height reached maximum of 9 m with the significant wave height of 4 m at 04:00 (1 hour after the passage of Maemi). The currents measured near the surface reached up to about 100 cm/s at 13:00 (10 hours after the passage of Maemi). The mixed layer (high temperature and low salinity) thickness, which was accompanied by strong southward current, gradually increased from 20 m to 40 m during the 10 hours. A simple two layer model for the response to an impulsive alongshore wind over an uniformly sloping bottom developed by Csanady (1984) showed reasonable estimates of alongshore and offshore currents and interface displacement for the condition of typhoon Maemi at the buoy position (x=8.15 km) during the 10 hours.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.59-63
• /
• 2005

가. 자율주행 트랙터가 작업하는 동안 작동상태를 효과적으로 모니터링하고 제어할 수 있도록 하기 위해 인터넷을 통한 자율주행 트랙터의 모니터링과 원격제어 기술에 대하여 시험 하였다. 나. 트랙터를 모니터링하고 제어하는 곳과 경작지가 있는 곳을 인터넷으로 연결하고, 운전자가 탑승하지 않은 트랙터는 인터넷을 통해 전달받은 명령을 수행하도록 액튜에이터를 제어하고 제어되는 상황을 경작지에 위치한 카메라가 촬영하여 인터넷을 통하여 원격지의 운전자 쪽으로 전송하도록 시스템을 구성했다. 다. HST 트랙터 조종장치로서 서보제어가 가능한 액튜에이터를 개발 장착하고 제어성능을 시험하였다. 전자유압제어(EHPS)식 조향액튜에이터는 , 조향가능각 100도의 전범위에 조향 제어가 가능했으며 전조향에 필요한 시간은 약 1.6초 정도 였다. 피스톤 펌프의 사판각을 제어하는 전후진 제어기는 리니어 모터 구동식으로 총 제어 변위 50mm를 이동하는데 제어시간이 약 1.2초 소요되었다. 엔진 회전수를 제어하기위한 스로틀 액튜에이터는 리니어 모터 구동식으로 제어변위 30mm에 대해 제어시간이 0.8초 소요되었다. 3점 링크에 부착된 작업기의 위치를 제어하는 리프트 제어기도 리니어모터로 구동하였으며 제어거리 40mm에 대해 제어시간 0.9초정도가 소요되었다 라. 제작된 HST 무인 트랙터를 인터넷과 무선통신 시스템을 이용하여 원격 모니터링과제어 가능성에 대해 시험 했다. 인터넷을 통한 장거리 원격제어 및 모니터링 시험에서 제어신호의 전달지연은 0.3 ${\sim}$ 0.5초정도로 제어신호의 피이드 백을 확인할 때까지는 약1초정도의 대기 시간이 필요한 것으로 나타나 모니터링 및 제어 시스템의 개발 시 이를 고려할 설계가 필요한 것으로 나타났다.된 표층수온 분포값보다 2005년 2월에 관측된 표층수온 분포값이 상대적으로 낮은 분포 특성을 나타내고 있었다. 따라서 인공위성자료를 이용한 황해의 2004년 해황 분석 결과는 이상수온 상승의 원인이 쿠로시오 해류의 변동과 관련성이 높다고 판단되며 이에 대한 지속적인 연구가 현재 진행중에 있다.에 인산염 처리, 여기에 초음파 처리, 마지막 단계로 3분 끓이면 억제율이 68%까지 억제되었다. 이는 단일처리시 전혀 억제를 못하는 처리를 단계별로 한 단계씩 더해가면 allergy 억제효과가 나타난다고 할 수 있겠다. 초음파 처리도 역시 저 allergy 처리 공정에 이용될 수 있는데 이것은 그 처리로 인해 새로운 알러젠이 생성될 수도 있다. 또한 복합처리로 allergy를 감소시키면 연속적이고 동시적으로 하기 때문에 원가를 절감할 수 있다.환경현안에 대한 정치경제적 접근을 외면하지 말고 교과서 저작의 소재로 삼을 수 있어야 하며, 이는 '환경관리주의'와 '녹색소비'에 머물러 있는 '환경 지식교육'과 실천을 한단계 진전시키는 작업으로 이어질 것이다. 이후 10년의 환경교육은 바로 '생태적 합리성'과 '환경정의'라는 두 '화두'에 터하여 세워져야 한다.배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으며, 방제가 조사결과 진딧물, 응애 등 껍질이 연약한

• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.313-326
• /
• 2018

This paper introduces core techniques on ship detection and tracking based on a compact HF radar platform which is necessary to establish a wide-area surveillance network. Currently, most HF radar sites are primarily optimized for observing sea surface radial velocities and bearings. Therefore, many ship detection systems are vulnerable to error sources such as environmental noise and clutter when they are applied to these practical surface current observation purpose systems. In addition, due to Korea's geographical features, only compact HF radars which generates non-uniform antenna response and has no information on target information are applicable. The ship detection and tracking techniques discussed in this paper considers these practical conditions and were evaluated by real data collected from the Yellow Sea, Korea. The proposed method is composed of two parts. In the first part, ship detection, a constant false alarm rate based detector was applied and was enhanced by a PCA subspace decomposition method which reduces noise. To merge multiple detections originated from a single target due to the Doppler effect during long CPIs, a clustering method was applied. Finally, data association framework eliminates false detections by considering ship maneuvering over time. According to evaluation results, it is claimed that the proposed method produces satisfactory results within certain ranges.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.1E
• /
• pp.5-13
• /
• 1995

In order to estimate the variability of the wave propagation loss (PL) du e to hourly variations of the sound speed profiles (SSPs), we conducted oceanographic measurements every hour for 39 hours in October 1993 in the Korea Strait. Currents and meteorological data were measured simultaneously to examine the causes of the temporal variations of temperatures. During the experiment, the temporal variations of temperatures in the surface layer highly depend on the water mass transport from adjacent seas. The PL for low frequency (75-300 Hz) is calculated using the parabolic equation scheme and averaged over the whole water depth. The hourly variation of the SSP may cause a PL difference of up to 10 dB over a 30-50 km range. The variability of PL, represented by standard deviation for the 39 SSPs, is as large as 3 dB over a 50 km range.