• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.57-70
• /
• 2009

According to the change of the traffic conditions, the requirement of controlling the separated left(or right) turn, the median bus lane and bicycle signal is increasing. However, the traffic signal controller standard based on the four-set lights restricts to control the three-set lights which control the separated direction and kind of traffics. This study suggests the method to control the three-set lights signal by improving the hardware and software for the traffic signal controller which is operated currently in the traffic scene. The 6 output ports of Load Signal Unit(LSU) which is consisted of Pedestrian Red, Pedestrian Green, Red, Yellow, Arrow and Green signal reconstitute 2 rows of the Red, Yellow, Green for three-set lights while the Signal Map data's code values which control the signal step of an individual Ring and LSU are established to adjust the LSU's output ports(R1 Y1 G1 R2 Y2 G2) of the three-set lights. The effect of using the separated through/left turn and the median lane bus signal of three-set lights is analyzed from a Mangwoo intersection in Seoul. The results of analysis show that the delay time of the east-west direction where the median bus lane is operated is especially improved with over 70 sec/veh.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1731-1737
• /
• 2007

This paper considers subway routing problem. Given a schedule of train to be routed by a railway stock, the routing problem determines a sequence of trains while satisfying turnaround time and maintenance restrictions. Generally, the solution of routing problem is generated from set partition formulation solved by column generation method, a typical integer programming approach for train-set. However, we find the characteristics of metropolitan subway which has a simple rail network, a few end stations and 13 departure-arrival patterns. We reflect a turn-around constraint due to spatial limitations has no existence in conventional railroad. Our objective is to minimize the number of daily train-sets. In this paper, we develop two basic techniques that solve the subway routing problem in a reasonable time. In first stage, we formulate the routing problem as a Min-cost-flow problem. Then, in the second stage, we attempt to normalize the distance covered to each routes and reduce the travel distance using our heuristic approach. Applied to the current daily timetable, we could find the subway routings, which is an approximately 14% improvement on the number of train-sets reducing 15% of maximum traveling distance and 8% of the standard deviation.

• Analytical Science and Technology
• /
• v.13 no.1
• /
• pp.101-107
• /
• 2000

The automotive paints could be generally differentiated by color, layer sequence and chemistry of the paint layers comprising each of the topcoat and the primer system. The successful identification of hit-andrun a and traffic accidental vehicles from evidential paint fiagments is greatly facilitated with a comprehensive laboratory collection of reference paint samples and the technique for direct analysis without sample preparation. The Pyrolysis-Gas Chromatography(PGC) is a precise and reliable method for performing both quantitative and qualitative analysis of polymeric materials and forensic samples. Our Forensic Laboratory is conducting the examination and identification of 73 reference paint samples; 4 colors of each domestic automotive make that is popular in Korea, by Curie Point Pyrolyzer(JHP-3) and GC with capillary column(ultra alloy-5). This method can be used not only to compare paint traces with their suspected sources, but also to identify the type, make and model of the automotive car.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.614-621
• /
• 2004

At present, the electronic document is being processed in WYSWYG mode. For this, a document is structured by the logical structure and the physical structure, and is presented by the markup language. After XML is announced, an application scope of the electronic document is extended from interchanging to searching. However, in point of output quality, a XML document image on a browser has lower quality than a general document image on desktop publishing. The reason is which output function of a browser has not capability for high quality printing. The W3C developed XSL-FO(XSL-formatting Object) for style sheet formatting and PDL(Page Description Language) as like Postscript is already developed and used widely. In this paper, we designed the Postscript-Converter to get a high quality document image by converting XSL-FO into Postscript format.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.

• Korean Journal of Cognitive Science
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2000

Most of the important visual information is presented to driver through the display panel that is related to the vehicle. If display panel is designed with the c consideration of driver's visibility, drivers can get broad visual field and visual I information related to vehicle promptly and exactly during driving situation. Therefore display panel has direct relationship with the driver's task performance and it can be considered as an important device that affects the driver-automotive interaction. Many r researches about shape, characteristic and color of display panel have been performed, but not sufficient in this country Nowadays most of vehicles has an analog type display. but its shape and arrangement a are various without any definite standards about position. Therefore. experiments using evaluation tool (VISVEC System) were conducted to inquire the driver's preference on the major objects arrangement of display panel (speedometer. tachometer. fuel meter. and t thermometer) and to ascertain the factors that have an effect on drivers according to the objects position of the display panel The experiment results showed that there was no correlation between the arrangement c characteristics preferred by subjects and the cognitive accuracy but the cognition of V visual information more easy when the each major object has its area.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.