• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.566-575
• /
• 2011

Since LPG (Liquefied petroleum gas) fuel supply system has an advantage of low emission characteristics, many studies have been conducted. In spite of the advantage of LPG supply system, a higher vapor pressure and lower viscosity than diesel or gasoline fuel may cause unstable running of fuel pump by the deterioration in lubrication performance and chemical reaction with rubber parts than that of diesel and gasoline fuel. Therefore its physical properties can cause the deterioration of durability. In this research, we developed an external type LPG pump which has the advantage of the price competitiveness and the convenient maintenance for LPLi system. The experiments were carried out in order to assess characteristics of the external type fuel pump at different fuel composition and temperature. As a result, there aren't any differences between internal and external type pump performance. It is observed that the same level of efficiency was maintained for both pumps as flow rate was increased with higher fuel temperature and more contents of propane in the fuel. And the pressure difference in LPLi system is maintained at constant with the various fuel compositions and temperatures due to their own characteristics of fuel supply system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.1
• /
• pp.81-88
• /
• 2014

An experimental study is performed to obtain an average heat transfer coefficient around the perimeter of a near horizontal tube. For the test a stainless steel tube of 50.8 mm diameter submerged in water at atmospheric pressure is used. Both subcooled and saturated pool boiling conditions are considered and the inclination angle of the tube is changed from the horizontal position to $9^{\circ}$ in steps of $3^{\circ}$. In saturated water, the local boiling heat transfer coefficient at the azimuthal angle of $90^{\circ}$ from the tube bottom can be regarded as the average of the coefficients regardless of the tube inclination angles. However, when the water is subcooled the location for the average heat transfer coefficient depends on the inclination angle and the heat flux. It is explained that the major mechanisms changing the heat transfer are closely related with the intensity of the liquid agitation and the generation of big size bubbles through bubble coalescence.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.1
• /
• pp.31-35
• /
• 2004

This experiment was performed to observe morphological changes in rice leaf tissue caused by a successive UV-B radiation. Effect of UV-B radiation on the structural alteration of tissue was not visually found, however, Photosynthate containing phosphate was sharply reduced in proportion with an increase of UV-B radiation. Fundamental components of cuticle layer were being degraded after 6 h of UV-B radiation compared to the control. UV-B-induced mesophyll cell appeared altered because of water stress, the shape of chloroplast appeared to be considerably shrunk and chloroplast thylakoid membranes were severely destructed. Primary cell wall of UV-B-stressed tissue was entirely scattered or disappeared, and the secondary cell wall due to lignin synthesis and deposition resulted in being thickened, almost 2-times, compared with the control.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.187-194
• /
• 1998

InGaAsP epitaxial layers lattice matched to InP were grown at 600 and $620^{\circ}C$ by low pressure metalorganic chemical vapor deposition. Solid phase composition of group III was controlled by the diffusion flux gas phase to the reachion surface. For the case of group V, the difference of As and P vapor pressure and pyrolysis efficiency of $PH_3$and $AsH_3$ mainly determined their in corporation into solid. An abnormal behavior of peak energy shift was observed below 75K in temperature variant photoluminescence study. This abnormal behavior was explained by the difference in order of ordering which makes spatial variation of energy gap in InGaAsP layer and this explanation was supported by the analyses of transmission electron microscopy and transmission spectroscopy.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.254-254
• /
• 2013

마그네트론 스퍼터링은 그 단순한 구조로 인하여 신뢰성과 확장성이 높은 기술이다, 이로 인해 DLC, ITO 등의 산업 분야에서 많이 사용하는 박막 공정 기술이다. 하지만 인듐과 같은 희토류 금속의 가격이 최근 상승함에 따라 나타난 낮은 타겟 효율성의 문제와 낮은 파워 밀도로 인한 기판의 추가적인 bias 추가에 따른 비용상승, 그리고 reactive 스퍼터링 시 낮은 증착률 등의 문제점들 또한 존재한다. 이러한 단점들을 해결하기 위해 많은 연구들이 이루어 졌으며, 높은 파워 밀도를 위해 High power Impulse Plasma Magnetron Sputtering (HIPIMS) 기술과 타겟 사용률을 높이기 위한 High Target Utilization Sputtering (HITUS) 등의 기술 등이 개발되었다. 본 연구에서는 직류 전원을 사용한 High density Plasma Sputtering System (HIPASS)이라 명하는 고밀도 원거리 플라즈마 소스를 이용한 스퍼터링 이용해 증착한 박막의 특성을 연구 하였다. Hollow cathode discharge에서 발생한 고밀도 플라즈마가 외부 유도 자장 코일에 의하여 타겟 표면까지 도달하게 되며, 스퍼터링 타겟의 고전압 bias에 의해 플라즈마 이온들이 가속이 이루어져 스퍼터링 공정이 이루어 지게 된다. 본 연구의 공정에서 타겟 사용 효율은 최대 90%까지 이며, 원거리 플라즈마 소스에서의 이온으로 스퍼터링을 실시함으로 인해 스퍼터링 전압과 전류의 독립적인 조절이 가능 하다. 본 연구에서 HIPASS을 이용하여 기판에 추가적인 전압 인가 없이 Ti 타겟과 아르곤/질소 혼합가스를 사용하여 TiN 박막을 증착 하였다. TiN의 증착률은 약 44 nm/min였으며, 이 박막의 XRD 분석 결과 TiN (111), (200), (220) 면들이 관찰이 되었다. 높은 스퍼터링 입자 에너지에서 증착 된 TiN 박막에서 우선적으로 나타나는(200)과 (220) 면들이, 본 실험에서는 기판에 추가적인 전압인가 없이도 우선방위 성장을 보였다. 이 박막의 micro-hardness 측정 결과 약 34.7 GPa이며, 이는 UBM 이나 HIPIMS에서 보여주는 결과에 준하거나 그 이상의 수치이다. 이와 같은 결과는 본 연구에서 사용한 HIPASS 증착 공정이 높은 스퍼터링 입자 에너지를 가지기에 고밀도의 TiN 박막이 증착 된 결과로 볼 수 있다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.5 no.2 s.17
• /
• pp.57-63
• /
• 2005

In case of general structures, it has been known that the strain amplitude band experienced by the base in a state of service load is less than 1% and most of the base show low, strain amplitude behavior less than 0.01%. In this study examining the influence affected to dynamic behavior in a condition of the low strain amplitude of unsaturated decomposed granite soils, the resonant column test, using some samples in Su-won area, has been performed for each degree of saturation resulted from different void ratios and confined stress. It is found out that the minimum value of the damping ratio occurred in roughly $17{\sim}18%$ according to void ratios regardless of confined pressure in the same manner with the case of the maximum shear elastic modulus; and it is estimated that for the influence of surface tension in the optimum degree of saturation, the damping ratio appears to be least.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.29-34
• /
• 2004

This paper reports the RF dispersion and linearity characteristics of unpassivated AlGaN/InGaN/GaN high electron-mobility transistors (HEMTs) grown by molecular beam epitaxy (MBE). The devices with a 0.5 ${\mu}{\textrm}{m}$ gate-length exhibited relatively good DC characteristics with a maximum drain current of 730 mA/mm and a peak g$_{m}$ of 156 mS/mm. Highly linear characteristic was observed by relatively flat DC transconductance (g$_{m}$) and good inter-modulation distortion characteristics, which indicates tight channel carrier confinement of the InGaN channel. Little current collapse in pulse I-V and load-pull measurements was observed at elevated temperatures and a relatively high power density of 1.8 W/mm was obtained at 2 GHz. These results indicate that current collapse related with surface states will not be a power limiting factor for the AlGaN/InGaN HEMTs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.827-830
• /
• 2011

In this paper, a wind speed & direction module and the DSP(Digital Signal Processor) sensor interface circuit board are proposed. This DSP system accepts and process the informations from a wind speed & direction module, the atmospheric pressure sensor, the ambient air temperature sensor and transfers it to the PC monitering system. Especially, a wind speed & direction module and a DSP hardware are directly designed and applied. A wind speed & direction module have a construction that it have four film type RTD(Resistive Temperature Detectors) or film type Piezo sensors adhered around the circular metal body for obtaining vector informations about wind. By this structure, the module is enabled precise measurement having a robustness about vibration, humidity, corrosion. A sensor signal processing circuit is using TMS320F2812 TI(Texas Instrument) Corporation high speed DSP.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.17-22
• /
• 2003

This paper presents an experimental investigation of a reversible colloidal seismic damper, which is statically loaded, The porous matrix is composed from silica gel (labyrinth or central-cavity architecture), coated by organo-silicones substances, in order to achieve a hydrophobic surface. Water is considered as associated lyophobic liquid. Reversible colloidal damper static test rig and the measuring technique of the static hysteresis are described. Influence of the pare and particle diameters, particle architecture and length of the grafted molecule upon the reversible colloidal damper hysteresis is investigated, for distinctive types and mixtures of porous matrices, Variation of the reversible colloidal damper dissipated energy and efficiency with temperature, pressure, is illustrated.