• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.979-984
• /
• 1999

Aromatic soluble polyimides were synthesized from 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane and various dianhydrides such as pyromelltic dianhydride(PMDA), 3,3',4,4'-benzophenone tetracarboxylic dianhydride(BTDA), and 4,4'-(hexafluoroisopropylidene)-bis(phthalic anhydride)(6FDA). Polyimides prepared by thermal imidization were insoluble in common organic solvents (acetone, MNP, DMAc, DMSO, THF, and DMF) but those prepared by chemical imidization were soluble. The difference of solubility was explained by esterification between hydroxyl group and $CH_3COO^-$ from acetic anhydride used as a dehydration agent in chemical imidization. Glass transition temperatures of polyimides by thermal method were higher than those by chemical method. All of the polyimides are stable up to $300^{\circ}C$ regardless of the sample preparation. The x-ray diffraction patterns showed that all polyimides were amorphrous.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.23-30
• /
• 1999

The relationships between morphological structures and residual stress behaviors of polyimide thin films depending on isomeric diamines were investigated. For this study, Poly(phenylene biphenyltetracarboximide) (BPDA-PDA) and poly(oxydiphenylene biphenyltetracarboximide) (BPDA-ODA) films were prepared from their isomeric diamines: 1,3-phenylene diamine (1,3-PDA) 1,4-phenylene diamine (1.4-PDA), 3,4'-oxydiphenylene diamine (3,4'-ODA), and 4,4'-oxydiphenylene diamine (4,4'-ODA), respectively. For those films, residual stresses were detected in-situ during thermal imidization of the isomeric polyimide as a function of processing temperature over the range of 25~$400^{\circ}C$ using. Thin Film Stress Analyzer (TFSA). In comparison, residual stress of BPDA-1.4PDA having better in-plain orientation and chain order was the lowest value of 7MPa whereas those of BPDA-1,3-PDA, BPDA-3,4'-ODA, and BPDA-4,4'-ODA were in the range of 40-50MPa. Conclusively, the effect of morphological nature (chain rigidity, chain order, orientation) and chain mobility relating to the g1ass transition behavior on the residual stress of isomeric polyimide thin films wart analyzed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2023.04a
• /
• pp.66-66
• /
• 2023

만감류 5종(한라봉, 천혜향, 황금향, 레드향, 카라향) 부위별 에탄올 추출물의 항산화 활성에 관하여 총 폴리페놀 함량 측정, 총 플라보노이드 함량 측정, DPPH radical 소거 활성 실험을 실시하였다. 만감류 5종(한라봉, 천혜향, 황금향, 레드향, 카라향)의 총 폴리페놀 함량의 경우, 레드향 과피 처리구(93.97mg/g)에서 가장 높았으며, 천혜향을 제외한 모든 만감류 품종 부위들 가운데, 과피 처리구에서 높은 폴리페놀 함량을 나타내었다. 만감류 5종(한라봉, 천혜향, 황금향, 레드향, 카라향)의 총 플라보노이드 함량은 한라봉 전체 처리구(23.65mg/g)에서 가장 높았으며, 모든 처리구에서 30mg/g 함량보다 낮은 결과를 나타내어 총 폴리페놀 함량 대비 낮은 함량을 나타내었다. 이러한 현상은 만감류 5종(한라봉, 천혜향, 황금향, 레드향, 카라향) 가운데 과피 두께의 비율이 영향을 미친 것으로 판단되어진다. 만감류 5종(한라봉, 천혜향, 황금향, 레드향, 카라향)의 DPPH radical 소거 활성의 경우, 한라봉 전체(81.01%)를 시작으로 한라봉 중피(73.13%), 한라봉 외피(63.94%) 처리구에서만 DPPH radical 함량이 EDA 50% 이상 값을 나타내었다. 특히 총 폴리페놀 함량(mg/g)과 총 플라보노이드 함량(mg/g) 모두에서 높은 수치를 기록했던 처리구들 가운데 한라봉 중피(79.75, 23.16), 한라봉 전체(75.51, 23.65) 처리구에서 높은 항산화 활성을 보인 반면, 레드향 과피(93.97, 20.59)의 활성은 49.26%로 DPPH radical EDA 50%에 미치지 못하였다. 이러한 결과는 과피와 과육의 에센셜 오일과 성분의 차이에서 기인된 것으로 추측된다.

• Journal of Energy Engineering
• /
• v.9 no.3
• /
• pp.228-236
• /
• 2000

본 연구에서는 순간 고온식 tubing-bomb reactor를 사용하여 41$0^{\circ}C$에서 Alaska산 아역청탄, 폐타이어, 폴리프로필렌 혼합물의 공동액화 시 액화특성 및 상승효과를 연구하였다. 석탄, 폐타이어와, 폴리프로필렌의 조성을 변화시키고 수소공여용매인 tetralin의 양을 변화시켜가며 공동액화를 진행했을 경우 공동액화율을 살펴보면, 무촉매 반응의 경우 폴리프로필렌의 양이 많아지면 tetralin이 첨가되지 않았을 경우 액화율이 증가하였으나 tetralin이 첨가되었을 경우 공동액화율이 감소하였다. 촉매 반응의 경우에는 모든 반응조건에서 상승효과가 나타났으며 폴리프로필렌의 양이 증가할수록 공동액화율이 증가하여 석탄 : 폐타이어 : 폴리프로필렌의 조성이 1:1:3에서 tetralin 4$m\ell$, Co-naphthenate 촉매 사용하였을 때가 최적의 반응조건으로 83%의 공동액화율을 나타내었다.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.190-197
• /
• 2005

Nanocomposites of three different polyesters with dodecyltriphenylphosphonium-montmorillonite $(C_{12}PPh-MMT)$ as an organoclay are compared with their thermal properties, mechanical properties, and morphologies. Poly (butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and poly(trimethylene terephthalate) (PTT) were used as matrix polymers in the fabrication of polyester nanocomposite fibers. The variations of their properties with organoclay content in the polymer matrix and draw ratio (DR) are discussed. Transmission electron microscopy (TEM) micrographs show that some of the clay layers are dispersed homogeneously within the polymer matrix on the nano-scale, although some clay particles are agglomerated. We also found that the addition of only a small amount of organoclay is enough to improve the thermal stabilities and mechanical properties of the polyester nanocomposite fibers. Even polymers with low organoclay contents $(<5\;wt\%)$ were found to exhibit much higher strength and modulus values than pure polyester fibers. In the cases of all polyester hybrid fibers, the values of the tensile mechanical properties were found to decrease linearly with increasing DR. However, the initial tensile modulus of the PTT hybrid fibers were found to be independent of DR.

• The Korean Journal of Applied Statistics
• /
• v.13 no.2
• /
• pp.489-503
• /
• 2000

Data mining means data analysis and model selection using various types of data in order to explore useful information and knowledge for making decisions. Examples of data mining include scoring for credit analysis of a new customer and scoring for churn management, where the customers with high scores are given special attention. In this paper, scoring is interpreted as a modeling process of the conditional probability and polyclass scoring method is described. German credit data, a PC communication company data and a mobile communication company data are used to compare the performance of polyclass scoring method with that of the scoring method based on a tree model.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.544-549
• /
• 2014

Double layered film consisting of polyimide/polysiloxane and interface with nano domain structure was fabricated through stepwise layer formation and subsequent aging steps. During aging of film, nano phase separation occurred between the top layer polysiloxane and the upper layer of polyimide, which was observed by transmission electron microscope (TEM). A stable and uniform polysiloxane layer was obtained, showing the reproducible pressure-sensitive adhesion (PSA) property with the peel strength of 8-13 g/inch at even $300^{\circ}C$. In addition, the resulting polymide/polysiloxane film was thermo-stable up to $435^{\circ}C$, providing the promising properties suitable for application in microelectronics processing.

• Polymer(Korea)
• /
• v.38 no.2
• /
• pp.129-137
• /
• 2014

In this study, the melt-mixing condition was optimized first to maximize the physical properties of a wood plastic composite (WPC) with recycled polypropylene (PP) and the effects of recycled PP content on the physical properties of the WPC were investigated. Mechanical properties of the WPC were measured by UTM and an izod impact tester and thermal properties were investigated by DSC, TGA and DMA. Fracture surfaces of the WPC were investigated by SEM. The optimized mixing condition of WPC with 50 wt% recycled PP of total PP was melt-mixing at $170^{\circ}C$ for 15 min at 60 rpm. With increasing the content of the recycled PP, the water absorption characteristics of the WPC increased and the thermal and mechanical properties decreased. However, the following was concluded from the analysis of all the physical properties; it was possible adding the recycled PP up to 50 wt% of total PP without a significant decrease in the performance of the WPC.

• Electrical & Electronic Materials
• /
• v.4 no.1
• /
• pp.19-30
• /
• 1991

W/Si의 조성비가 2.6인 CVD텅스텐 실리사이드를 어닐링처리후 dry 또는 wet oxidation하여 폴리사이드 구조에서 다결정 Si내의 농도가 실리사이드의 산화반응속도에 미치는 영향을 조사하였다. 인의 농도에 관계없이 항상 실리사이드의 산화속도가 (100)Si의 그것보다 더 높았다. 저온에서 dry oxidation한 경우 인의 농도가 증가함에 따라 산화속도는 감소하였으나 고온에서 dry oxidation한 경우에는 P농도와 산화속도간에 상관관계가 별로 없었다. 한편, wet oxidation의 경우에는 모든 산화온도에서 인의 농도가 높을수록 실리사인의 산화속도가 더 낮은 것으로 나타났다.

• The Korean Journal of Rheology
• /
• v.5 no.1
• /
• pp.23-33
• /
• 1993

저밀도폴리에틸렌과 나일론6의 블렌드가 용융압출기의 사용에 의해 제조되었다. 제 조된 비상용 블랜드의 유변학적, 형태학적 분석을 통하여 이들사이의 상관관계를 조사하였 다. 전단속도, 계면장력, 용융점도, 분산상의 농도들에 대한 분산상의 크기의 의존성을 평가 하였다. 한편 신장유동에 의한 모폴로지 변화를 조사하기 위하여 기제조된 블렌드를 사용하 여 용융방사를 하였다. 이러한 방식실험으로부터 본연구에 사용된 저밀도 폴리에틸렌과 나 일론6는 분산상과 연속상의 신장점도의 상대적 크기에 무관하게 피브릴화가 되어 방사 연신 비의 증가에 의해 매우 가는 분산된 피브릴을 얻을수 있었다.