• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.1-7
• /
• 1995

${(Fe_{0.85}Co_{0.15})}_{75}Al_{7}B_{18-x}Nb_{x}(x=2,\;4\;and\;6\;at%)\;and\;{(Fe_{0.85}Co_{0.15})}_{75}Al_{y}B_{21-y}Nb_{4}(y=3,\;5,\;7,\;9\;at%)$ alloys were prepared by a single-roll quenching method. Microstructure and magnetic properties of the alloys such as saturation magnetization, initial permeability, coercive force and power loss have been investigated as functions of composition and armea1ing temperature. Nanocrystallines are obtained by armealing of as-prepared amorphous alloys in all compositions except the alloy of 9 at% AI. Saturation magnetization increases after armea1ing and, decreases with Nb content. However, AI and B affects the saturation magnetization insignificantly. Initial perrreability of nanocrystallized alloy at 50 kHz is improved roore than twice compared to that of the as-prepared alloy. Coercive force and core loss reach less than half after armea1ing.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.210-215
• /
• 2012

The absorption performance of a metal-backed single layered electromagnetic wave absorber is optimized at matching conditions of thickness and frequency indicating the maximum returns loss of incidence electromagnetic wave in the contour map. These matching conditions are obtained by applying the electromagnetic impedance to the transmission line theory, which depend on the complex permeability and complex permittivity of absorber material. The magnetic materials with high permeability can enhance the matching thickness condition to the wide frequency range based on the decrease of permeability with frequency and it can be used as a wideband electromagnetic wave absorber material. Therefore, the magnetic materials with higher saturation magnetization and lower permittivity than NiZn ferrite can be applied to the wideband electromagnetic wave absorber in order to satisfy the newly enforcing the electromagnetic compatibility regulation in the future.

• Journal of the Korean Magnetics Society
• /
• v.16 no.6
• /
• pp.293-299
• /
• 2006

Magnetic nanoparticles were prepared by thermal decomposition and adsorbed with lecithin by applying ultrasonic. The size and saturation magnetization of magnetic nanoparticles were observed with different lecithin concentration, and the maximum tolerated dose (HTD) and toxicity of magnetic fluid was investigated through a biological test. The thickness of lecithin-adsorption layer increased non-linearly with increasing amounts of added lecithin, and the desirable adsorption amount was observed in the lecithin concentration of 20%(w/v). The dispersibility and magnetic properties of lecithin-adsorbed magnetic nanoparticles were most excellent when the ultrasonic exposure time was 1.5h. Also, the maximum tolerated concentration with best cell viability was $32{\mu}g/ml$ in vitro test, and lecithin-adsorbed magnetic fluids improved the biocompatibility by 1.2 times compared with bare magnetite fluids in vivo.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.97-103
• /
• 2001

Polycrystalline thin films of La$_{2}$3/Sr$_{1}$3/MnO$_3$(LSMO) were prepared by water-based sol-gel processing on thermally oxidized Si(100) substrate. The thickness dependence of the low-field tunnel-type magnetoresistance properties at room temperature was studied. Tunnel-type magnetoresistance at low-field is found to be strongly dependent on film thickness. Maximum value of tunnel-type magnetoresistance of LSMO thin films was appeared at the film thickness of ~1500 $\AA$. This behavior can be explained in terms of dead layer between LSMO thin film and Si(100) substrate and thermal lattice strain effect in the LSMO thin films.

• Journal of the Korean Magnetics Society
• /
• v.14 no.4
• /
• pp.120-126
• /
• 2004

In order to understand the temperature dependence of magnetic properties of $F_{84}Nb_{16}$(wt.%) thin films, ferromagnetic resonance experiments have been carried out. The ferromagnetic resonance spectra for all temperatures consist of several volume modes and one (or two) surface modes. It is suggested that both surface of the film have a perpendicular hard axis to the film plane (negative surface magnetic anisotropy). Saturation magnetization coincides with the Block's T$\^$2/3/ and spectroscopic splitting factor is almost constant in the temperature range from 113 K to 293 K. The surface magnetic anisotropy constant K$\_$s2/ of the film-substrate interface increased with decreasing temperature in the temperature range from 233 K to 293 K. The surface magnetic anisotropy constant K$\_$s1/ of the air-substrate interface decreased from -0.322 erg/$\textrm{cm}^2$ to -0.394 erg/$\textrm{cm}^2$ as the temperature decreased to 253 K and was almost constant below 233 K.233 K.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.143-143
• /
• 1999

Co/Ti 다층 박막을 제조하기 위해 직류원 마그네트론 스퍼터링 시스템을 이용하여 (100)실리콘 단결정 기판위에 Co와 Ti층을 각각 2/2, 5/5, 10/10 nm 정도의 두께로 조절하여 세가지 조성의 Co/Ti 다층 박막을 제조하였다. 이러한 Co/Ti 다층 박막의 후속 열처리는 Ar 가스분위기 하에서 Tube furnace를 이용하여 20$0^{\circ}C$와 30$0^{\circ}C$, 40$0^{\circ}C$의 온도에서 진행하였다. 증착초기에서부터 후속 열처리 공정을 진행하는 동안, Co/Ti 다층 박막에서의 계면반응을 미세 구조 변화 및 전기, 자기적 특성변화와 연관지어 관찰하였다. Co/Ti 다층 박막의 결정 구조와 미세 구조 변화를 관찰하기 위해 각각 X-선 회절기와 투과 전자 현미경을 사용하였고, 다층 박막의 전기적, 자기적 특성 변화를 관찰하기 위해 각각 4점 탐침기, 진동 시료형 자속계를 이용하였다. Co/Ti 다층 박막을 20$0^{\circ}C$의 저온에서 열처리를 한 경우에는 증착 초기의 계면반응에 의해 형성된 비정질 층이 성장하였고, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리를 하는 경우에는 비정질 측의 성장보다는 새로운 화합물 CoTi 결정상이 형성되면서 비정질상은 오히려 감소하였다. 즉, Co/Ti 다층 박막의 계면 반응은 결정질 Co와 Ti을 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응이 활발히 일어났다. 특히, 소모된 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 소모된 계면 반응물 Co와 Ti 중에서 Ti의 소모속도가 더 빠르게 관찰되었다. 이로부터 Ti 이 증착초기에서 저온 열처리 과정동안 Co/Ti 다층 박막의 계면에서 일어나는 비정질화 반응의 주 확산자로 작용했다는 것을 알 수 있다. 한편, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리한 Co/Ti 다층 박막의 계면 반응은, 비정질 반응에 의한 비정질층의 형성보다는 새로운 화합물 결정질 CoTi상을 형성시키는 결정화 반응이 우세했다. Co/Ti 다층 박막의 전기적 저항은, 열처리에 의한 비정질 층의 생성 및 성장으로 인해 증가하였고 새로운 저저항 CoTi 결정상의 형성으로 인해 감소하는 것을 알 수 있었다. 또한 Co/Ti 다층 박막의 포화 자화값은, 열처리에 의한 계면에서의 비정질화 반응과 CoTi 결정화 반응으로 인해 강자성체인 Co 결정상이 감소됨에 따라 감소하는 경향을 나타냈다.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.54-61
• /
• 2019

In this study, a magnetic adsorbent was synthesized by growing ferrite nanoparticles substituted with metals (Me = Co, Mn, Ni) on zeolite 4A for the efficient separation of waste adsorbents present in the solution after the adsorption of Cu(II). The metal ferrite grown on the surface of zeolite was prepared by solvothermal synthesis. Characteristics of the magnetic adsorbent were analyzed by X-ray diffractometer (XRD), scanning electron microscopy (SEM) and physical property measurement system (PPMS). The saturation magnetization of the A type zeolite coated with Co-ferrite (CFZC) was the highest at 5 emu/g and the Cu(II) adsorption performance was also excellent. The adsorption results of Cu(II) on CFZC were well fitted by the Langmuir model at 298 K. Also, the adsorption of Cu(II) on CFZC follows a pseudo-second order kinetic. The Gibbs free energy values (${\Delta}G^0$) ranging from -4.63 to -5.21 kJ/mol indicates that the Cu(II) adsorption is spontaneous in the temeprature range between 298 and 313 K.

• Journal of the Korean Magnetics Society
• /
• v.13 no.1
• /
• pp.21-28
• /
• 2003

M-type hexagonal BaF $e_{12-2x}$ $Co_{x}$ $Ti_{x}$ $O_{19}$ (0$\leq$x$\leq$1.0) ferrite powders prepared by a sol-gel method. The crystallographic and magnetic properties were characterized with a x-ray diffraction (XRD), thermogravimetry (TG), differential thermal analysis (DIA), Fourier transform infrared spectroscopy (FT-IR), vibrating sample magnetometer (VSM), and Mossbauer spectroscopy. The result of XRD measurements show that the a and c lattice parameters increase with increasing x from $\alpha$=5.882 and c=23.215 $\AA$ for $\chi$=0.0, to $\alpha$=5.895 and c=23.295 $\AA$ for $\chi$=1.0. From the Mossbauer results, the $Co^{2+}$- $Ti^{4+}$ site occupancies have been affected the changes in the magnetization and in the coercivity. The Curie temperature linearly decreases with increasing $Co^{2+}$- $Ti^{4+}$ concentration x.

• Journal of the Korean Magnetics Society
• /
• v.5 no.4
• /
• pp.281-286
• /
• 1995

In order to study the effect of additives $SiO_{2}$ on the magnetic properties of hexaferrite sheet magnet, we used X-ray diffractometer, Mossbauer spectrometer, and VSM magnetometer. We have prepared $Ba_{0.25}Sr_{0.75}Fe_{12}O_{19}$ green sheets by the Dr. Blade method. Most of samples have a magnetoplurnbite crystal structure of typical M-type hexaferrite. The lattice parameters are found not to be affected by the addition of $SiO_{2}$. ${\alpha}-Fe_{2}O_{3}$ phase develops above $SiO_{2}$ 2.0 wt.%. Isomer shifts indicate that the valence of Fe ions is trivalent. Curie temperatures decrease slightly with increasing $SiO_{2}$ concentrations. It means that the $Si^{4+}$ subsitution for 12k-site $Fe^{3+}$ has an effect on the superexchange interactions Fe-O-Fe, which change the distance and the angle between cations and anions. It was suggested that ${\alpha}-Fe_{2}O_{3}$ phase results from the excessive Fe produced by subsituting $Si^{4+}$ for $Fe^{3+}$. Based upon the results of $Ba_{0.25}Sr_{0.75}Fe_{12}O_{19}$ added with $SiO_{2}$, we concluded that $H_{c}$, $M_{s}$ and $M_{r}$ depend more strongly on the microstructure chracteristics than on the cation substitution.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.335-340
• /
• 1998

Colossal magnetoresistance $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ material has been produced by a metal-salt routed sol-gel process method. Magnetic properties of $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ have been studied with x-ray diffraction, Rutherford back-scattering spectroscopy(RBS), vibrating sample magnetometer, and Mossbauer spectroscopy. Crystalline $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ was perovskite cubic structure with a lattice parameter $a_0=3.868$\AA$$. And there was no appreciable change in the value of the lattice parameter when a small amount (x=0.01) of iron was added. However, Mossbauer and VSM data indicate the Curie temperature of the $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ decreased from 282 to 270 k and also the saturation magnetization from 84 to 81 emu/g at 77 K. Mossbauer spectra of $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ have been taken at various temperatures ranging form 4.2 K to room temperature. Analysis of $^{57}Fe$ Mossbauer data in terms of the local configurations of Mn atoms has permitted the influence of the magnetic hyperfine interactions to be monitored. The isomer shifts show that the charge state of all Fe ions are ferric. The magnetoresistance of $La_{0.67}Ca_{0.33}Mn_{0.99}^{57}Fe_{0.01}O_3$ was about 33 % at semiconductor-metal transition temperature $T_{SC-M}=250K$.