• Title/Summary/Keyword: 포텐셜

Search Result 828, Processing Time 0.028 seconds

Culture Maturity of Lentinula edodes on Sawdust-Based Substrate in Relation to Fruiting Potential (표고 톱밥배지의 성숙도와 자실체형성 포텐셜)

  • Ohga, Shoji;Min, Du-Sik;Koo, Chang-Duck;Choi, Tae-Ho;Leonowicz, A.;Cho, Nam-Seok
    • Journal of the Korean Wood Science and Technology
    • /
    • v.28 no.1
    • /
    • pp.55-64
    • /
    • 2000
  • Culture maturity assessment can be used to control fruiting body flush timing. Culture maturity of sawdust-based substrate was evaluated by using oak mushroom, (Lentinula edodes (Berk.) Pegler). The influence of substrate water potential (${\psi}$) on the growth and fruiting of three genotypes of L. edodes was also investigated. Glucosamine content revealed a peak at the fruiting body senescent stage. Glucosamine increased steadily to the sporophore senescent stage, and sharply declined at crop treatment. Lipid phosphate and ergosterol contents peaked at pinning and button break stages, respectively. Therefore lipid phosphate and ergosterol contents would be considered as the convenient measurement for judging culture maturity and fruiting potentials. The substrate pH values before inoculation and on the fruiting stage were varied from 6.3 to 4.0. This pH changes were detected as changes in color from bluish purple to yellow by direct bromphenol blue(BPB) spraying, and shown a good correlation with fruit body yield of the 1 st flush. Concerning water potential of the cultures, a slight reduction of water potential, -0.5MPa, stimulated mycelial and colony growths on liquid, agar and sawdust-based substrates. The water potential of well-colonized matured substrate was -0.7MPa and -4.0MPa, before and after the fruiting, respectively. Excellent water providing capacity (higher ${\psi}$) is expected to well-matured cultures with a high density of mycelial colonization. Also, the substrate water potential significantly affected by the interaction between genotypes and spawn run time.

  • PDF

Wavelet Generation and It's Application in Gravity Potential (중력 포텐셜에서의 웨이브렛 생성과 응용)

  • Kim, Sam-Tai;Jin, Hong-Sung;Rim, Hyoung-Rae
    • Journal of the Korean earth science society
    • /
    • v.25 no.2
    • /
    • pp.109-114
    • /
    • 2004
  • A wavelet method is applied to the analysis of gravity potential. One scaling function is proposed to generate wavelet. The scaling function is shown to be replaced to the Green’s function in gravity potential. The upward continuation can be expressed as a wavelet transform i.e. convolution with the scaling function. The scaling factor indicates the height variation. The multiscale edge detection is carried by connecting the local maxima of the wavelet transform at scales. The multiscale edge represents discontinuity of the geological structure. The multiscale edge method is applied to gravity data from Masan and Changwon.

A Theoretical Study on the Ground Water Flow Adjacent to Buried Pipe (지중 매설관 주변의 지하수흐름에 대한 이론적 고찰)

  • Lee, Seung-Hyun;Han, Jin-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.3
    • /
    • pp.1439-1443
    • /
    • 2011
  • A theoretical study on the ground water flow adjacent to buried pipe was conducted. Incompressible and irrotational flow were considered in analytical study. Ground water flow were defined by complex potentials. Firstly, uniform flow without buried pipe was analysed and then the effect of buried pipe was considered by superposition via circle theorem. Although two kinds of flow can be added by linearity of complex potentials, investigation of the singularities of the complex potentials should be done in advance. Finally, ground water flow past a buried pipe was analysed via complex potentials and net force exerted on the buried pipe by the ground water flowing past with circulation was derived.

Information Potential with Shifted Symbol Points and Related Blind Equalizer Algorithms (심볼점 평행이동 기능을 지닌 정보 포텐셜과 블라인드 등화 알고리듬)

  • Kim, Namyong
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.50 no.2
    • /
    • pp.3-10
    • /
    • 2013
  • Please In this paper, to cope with biased impulsive noise problems, a new information potential is proposed that can move the transmitted symbol points by modifying the information potential designed with Dirac-delta functions. Based on the proposed information potential a new blind algorithm is derived by employing an augmented filter structure. From the simulation results in the environment of biased impulsive noise, the conventional algorithms yield performance degradation by over 15 dB, but the proposed algorithm shows no performance degradation and holds the same steady state MSE of below -25 dB as after the initial convergence regardless of the channel conditions.

Potential Distribution Model for FinFET using Three Dimensional Poisson's Equation (3차원 포아송방정식을 이용한 FinFET의 포텐셜분포 모델)

  • Jung, Hak-Kee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.13 no.4
    • /
    • pp.747-752
    • /
    • 2009
  • Three dimensional(3D) Poisson's equation is used to calculate the potential variation for FinFET in the channel to analyze subthreshold current and short channel effect(SCE). The analytical model has been presented to lessen calculating time and understand the relationship of parameters. The accuracy of this model has been verified by the data from 3D numerical device simulator and variation for dimension parameters has been explained. The model has been developed to obtain channel potential of FinFET according to channel doping and to calculate subthreshold current and threshold voltage.

Decision Feedback Algorithms based on Information Potential of Constant Modulus Errors (상수 모듈러스 오차의 정보 포텐셜에 기본을 둔 결정궤환 알고리듬)

  • Kim, Nam-Yong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.5
    • /
    • pp.2332-2337
    • /
    • 2012
  • In this paper, a blind decision feedback algorithm is proposed based on the ideas that the derivative of information potential for constant modulus errors stays relatively undisturbed even when large output differences are induced by severe channel distortions and this property can prevent the error propagation that is one of the main problems in decision feedback structures. From the simulation results of the steady state MSE, the proposed blind equalizer algorithm with decision feedback has yielded about 3 dB performance enhancement in the channel model without spectrum nulls and above 9 dB in severe channel characteristics with spectrum nulls.

The Global Geopotential Models in the Region of Korean Peninsula

  • Yun, Hong-Sic;Adam, Jozsef
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.12 no.1
    • /
    • pp.95-106
    • /
    • 1994
  • The purpose of this paper is to establish the optimum reference field as testing some geopotential model, gravity data and GPS data. We have to decide a best fitting geopotential model as a reference surface for establishing the optimum geoid solutions. We conduct some tests on the Korean Peninsula gravity data to establish which of the model would be prove to be the best one. Three ways were used to compare the geopotential coefficient solutions. One of the tests is to compare the residual gravity anomaly remaining after the anomaly computed from the geopotential model has been subtracted from the "observed" gravity anomaly. The second method is a comparison of several geopotential solutions in terms of differences in gravity anomalies and quasi-geoid undulations. The third method is a comparison between the undulation obtained by GPS and the corresponding undulation from each geopotential model. The result showed that OSU91A model is a best fitting model as a reference in the region of Korean Peninsula.Peninsula.

  • PDF

Wave Deformation by Submerged Flexible Circular Disk (몰수된 원형 유연막에 의한 파랑변형)

  • 조일형;김무현
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.12 no.3
    • /
    • pp.116-129
    • /
    • 2000
  • The interaction of incident monochromatic waves with a tensioned, flexible, circular membrane submerged horizontally below free surface is investigated in the frame of three-dimensional linear hydro-elastic theory. The velocity potential is split into two parts i.e. the diffraction potential representing the scattering of incident waves by a rigid circular disk and the radiation potential describing motion induced waves by elastic responses of flexible membrane. The fluid domain is divided into three regions, and the diffraction and radiation potentials in each region are expressed by the Fourier Bessel series. The displacement of circular membrane is expanded with a set of natural functions, which satisfy the membrane equation of motion and boundary conditions. The unknown coefficients in each region are determined by applying the continuity of pressure and normal velocity at the matching boundaries. The results show that various types of wave focusing are possible by controlling the size, submergence depth, and tension of membrane.

  • PDF

다중 전원을 이용한 듀얼 랑뮤어 프루브 시스템을 통한 플라즈마 진단

  • Kim, Hyeok;Lee, U-Hyeon;Hwang, Gi-Ung
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2011.02a
    • /
    • pp.214-215
    • /
    • 2011
  • RF 플라즈마의 경우 일반적인 싱글 랑뮤어 프루브를 사용하여 I-V 파형을 구하는 경우에, 우리는 시평균한 값만을 구할 수 있다. 일반적인 플라즈마 반응 챔버의 구조상, 양 전극의 크기가 다르기 때문에, 시간에 따라 진동하는 플라즈마 포텐셜의 형태는 정확한 사인파의 형태가 아니다. 그렇기 때문에 플라즈마 포텐셜에 따라서 진동하는 데이터를 시평균한 값에는 DC 오프셋 성분이 나타난다. 이러한 DC 오프셋값은 랑뮤어 프루브를 통한 플라즈마 포텐셜 측정시에 오차로 나타난다. 우리는 DC 오프셋에 의한 에러값을 보정하기 위해 멀티 프루브를 사용할 수 있다. 가장 흔하게 쓰이는 듀얼 랑뮤어 프루브의 경우를 살펴보면, 내부의 전원이 플로팅되어 있으며 전압인가를 위한 회로 또한 접지에서 절연되어 있기 때문에, 플라즈마 포텐셜이 시간에 따라 흔들려도 전체적인 전위가 플라즈마 포텐셜과 함께 움직이기 때문에, 앞에서 말한 DC 오프셋에 의한 오차를 줄일 수있다는 장점이 있다. 그러나, 이를 위하여는 회로의 절대적인 플로팅이 필요하지만 실제 듀얼 랑뮤어 프루브의 전원 회로를 구현시에는, 트랜스포머 등을 사용하여 회로를 절연시켜도 회로에 기생적으로 발생하는 콘덴서 성분 때문에 플로팅에 영향을 받을 수 있다. 또한 양극과 음극 사이의 내부 임피던스가 다르게 나타난다. 실제로 기존의 듀얼 랑뮤어를 가지고 RF 플라즈마를 측정할 때에, 듀얼 랑뮤어 프루브의 두 팁 간에 서로 다른 전압-전류 파형이 나타나곤 한다. 이러한 두 팁간의 전압-전류 파형의 차이는 두 팁이 물리적으로 완전히 동일한 구조를 가질 수 없기 때문에 발생 하기도 하지만, 위에서 밝힌 원인에 의해서도 발생한다. 이로 인하여 듀얼 랑뮤어 프루브에 의한 I-V 파형은 이론 상 원점을 대칭으로 한 기함수의 형태이어야 하는데, 실제 측정 결과를 보면 이러한 대칭 형태의 모양을 보기 힘들다. 우리는 이에 이를 보정하기 위하여 위상이 180도 차이가 나는 두 개의 삼각파 발생 전원을 각각 듀얼 랑뮤어 프루브의 양 팁에 인가하여 두 팁 간의 내부 저항과 기생 임피던스 등을 일치시킨 프루브를 디자인하였으며 이 프루브를 이용한 실험에서, 비교적 완벽하게 원점에 대하여 대칭하는 I-V 커브를 구할 수 있었다. 이에 이 논문에서는 새로운 회로와 이 회로로 이루어진 듀얼 랑뮤어 프루브를 사용하여 플라즈마를 진단하는 방법에 대하여 기술한다.

  • PDF

Non-Quadratic Anisotropic Strain Rate Potential Defined in Plane Stress State (평면 응력 조건에서 정의된 비이차 비등방 변형률 속도 포텐셜)

  • Kim, D.;Kim, J.H.;Lee, Y.S.;Barlat, Frederic;Chung, K.
    • Transactions of Materials Processing
    • /
    • v.20 no.5
    • /
    • pp.369-376
    • /
    • 2011
  • A non-quadratic anisotropic strain rate potential was introduced as a conjugate potential of the yield stress potential Yld2000-2d to describe anisotropic behavior of sheet metals, in particular, aluminum alloy sheets under plane stress state. This strain-rate potential takes into account the anisotropic yield stresses and R-values measured along the directions measured at 0, 45 and 90 degrees from the rolling direction, as well as the balanced biaxial yield stress and strain-rate ratio. The convexity of the strain-rate potential was completely proven. The strain-rate potential was applied for two anisotropic aluminum alloy sheets, AA6022-T4 and AA2090-T3. The results verified that the strain rate potential properly described the anisotropic behavior of aluminum alloy sheets and was closely conjugate of Yld2000-2d under the plane stress state.