• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.167-176
• /
• 2021

When producing recycled asphalt mix, it is important that the old binder of reclaimed asphalt pavement(RAP) should be well melted during blending in the mixer. The recycled asphalt mix is produced by instant mixing(IM) of all materials(RAP, virgin asphalt and new aggregates) all together in the mixer. However, in the same recycled mix, the binder around RAP aggregate was found to show higher oxidation level than the binder coated around the virgin aggregate because the old binder of RAP was not rejuvenated properly while instant mixing. The partially-rejuvenated RAP binder is assumed to be a high stiffness point in IM recycled mix. In this study, the stage mixing(SM) method was introduced; blending RAP and virgin asphalt for the first stage, and then mixing all together with hot new aggregates for the second stage. To compare the effect of the two mixing methods on moisture resistance of recycled mixes, a statistical t-test was performed between SM and IM using indirect tensile strength(ITS) and tensile strength ratio(TSR). Three conditioning methods were used; a 16-h freezing and then 24-h submerging, 48-h submerging, and 72-h submerging in 60℃ water. It was found that the TSR(=ITS_wet/ITS_dry) values of the mixes prepared by SM was clearly higher than the IM mixes, and coefficients of variation of SM mixes were lower than the IM mixes. It was also observed that the ITS_WET of SM was significantly different from the IM at α=0.05 level by statistical t-test. The ITS_WET of SM mix was reduced less than the IM mix in severer conditioned mixes. Therefore, it was concluded that the stage mixing method was an important blending technique for producing better-quality of recycled asphalt mixes, which would show higher moisture resistance than the recycled mixes produced by conventional instant mixing.

• Asian Journal of Turfgrass Science
• /
• v.23 no.2
• /
• pp.317-330
• /
• 2009

Research was initiated to investigate germination vigor, number of leaves, plant height and turfgrass density. A total of 18 treatment combinations were used in the study. Treatments were made of soil organic amendment(SOA), sand, and water-absorbing polymer. Germination vigor, leaf number, plant height and turfgrass density were evaluated in Kentucky bluegrass(KB) grown under greenhouse conditions. Significant differences were observed in germination vigor, leaf number, plant height and turfgrass density among 18 mixtures of SOA and polymer. Highest germination rate was associated with mixture of SOA 20% + sand 80% + polymer 0%, resulting in 56.3% for KB. Number of leaves at 60 DAS(days after seeding) were greater with KB over PR, while plant height higher with PR over KB. Leaf number increased with SOA, being SOA 20% > SOA 100% > SOA 10% and with polymer from 0 to 12%. Plant height was greatest with SOA 20% and lowest with SOA 100%. Greater density was observed with PR rather than KB due to longer plant height. Turf density was best under SOA 10% and poorest under SOA 100% in KB. A further research would be required for investigating the individual effect of K-SAM, Ca, perlite on the turf growth characteristics.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.114-120
• /
• 2014

The aim of this study was to investigate of total ash, acid-insoluble ash and heavy metals content contained in commercial herbal medicines classified by parts used. A total of 1504 samples (84 species) purchased from markets in Seoul, are classified by five kinds of plant parts. The mean of total ash and acidinsoluble ash content (%) were as follows; Herba 9.0, 1.1, Caulis and cortex 6.1, 1.0, Flos fructus and semen 5.1, 0.8, Radix 4.6, 0.7 and Rhizoma 4.3, 0.4. The total amount of individual heavy metals content (mg/kg) (Pb, As, Cd and Hg) was high in Herba 1.13 and decreased in the order of Caulis and cortex 1.07, Rhizoma 0.91 and Radix 0.91, and was low in Flos fructus and semen 0.73. In addition, acid-insoluble ash contents was correlated with the total amount of individual heavy metals (r=0.314) (p<0.01).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.54-63
• /
• 2018

In this study, the stability and economic feasibility of a MSE (Mechanically stability earth) wall with a pre-cast concrete pacing panel was investigated for a standard section of highway. Based on the design criteria, the MSE walls of the panel type were designed considering the load conditions of the highway, such as the dead load of the concrete pavement, traffic load, and impact load of the barrier. The length of the ribbed metal strip was arranged at 0.9H according to the height of the MSE walls. Because the length of the reinforcement was set to 0.9H according to the height of the MSE wall, the external stability governed by the shape of the reinforced soil was not affected by the height increase. The factor of safety (FOS) for the bearing capacity was decreased drastically due to the increase in self-weight according to the height of the MSE wall. As a result of examining the internal stability according to the cohesive gravity method, the FOS of pullout was increased and the FOS of fracture was decreased. As the height of the MSEW wall increases, the horizontal earth pressure acting as an active force and the vertical earth pressure acting as a resistance force are increased together, so that the FOS of the pullout is increased. Because the long-term allowable tensile force of the ribbed metal strip is constant, the FOS of the fracture is decreased by only an increase in the horizontal earth pressure according to the height. The panel type MSE wall was more economical than the block type at all heights. Compared to the concrete retaining wall, it has excellent economic efficiency at a height of 5.0 m or more.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.7 no.4
• /
• pp.229-236
• /
• 2009

There are two types of spent fuels generated from nuclear power plants, CANDU type and PWR type. PWR spent fuels which include a lot of reusable material can be considered to be recycled. CANDU spent fuels are considered to directly disposed in deep geological formation, since they have little reusable material. In this study, based on the Korean Reference spent fuel disposal System(KRS) which is to dispose both PWR and CANDU spent fuels, the more effective CANDU spent fuel disposal systems have been developed. To do this, the disposal canister has been modified to hold the storage basket which can load 60 spent fuel bundles. From these modified disposal canisters, the disposal systems to meet the thermal requirement for which the temperature of the buffer materials should not be over $100^{\circ}C$ have been proposed. These new disposals have made it possible to introduce the concept of long tenn storage and retrievabililty and that of the two-layered disposal canister emplacement in one disposal hole. These disposal concepts have been compared and analyzed with the KRS CANDU spent fuel disposal system in terms of disposal effectiveness. New CANDU spent fuel disposal concepts obtained in this study seem to improve thermal effectiveness, U-density, disposal area, excavation volume, and closure material volume up to 30 - 40 %.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.99.1-100
• /
• 2003

키토산처리 콩나물에서 발아율이 높고 배축의 신장도가 높은 현상을 조사하기 위하여 전보에서와 동일한 방법으로 콩에 0.05% 키토산(493kDa, 금호화성, 한국)을 함유하는 0.05% 초산 용액 4배량을 가하여 8시간 침지한 후 2$0^{\circ}C$에서 2시간 간격으로 5일간 주수하면서 콩나물, 자엽, 배축으로 구분하여 전당, 환원당, 비환원당 및 유리아미노산의 함량변화를 조사하였다. 콩나물의 전당은 대조구, 키토산 처리구가 모두 성장에 따라 감소하였는데 대조구(1196$\longrightarrow$820 mg/100 g-f.w)보다 처리구(1241$\longrightarrow$670 mg/100 g-f.w)에서의 감소율이 높았다. 자엽의 전당함량은 성장에 따라 감소하였으며 키토산 처리구에서 현저하였고, 배축에서는 증가하는 경향을 나타내었다. 환원당 함량은 콩나물의 성장에 따라 감소하였으며 키토산 처리에 따른 뚜렷한 차이가 없었다. 그러나 자엽에서는 성장에 따라 감소하였으며 감소경향은 키토산처리구에서 높았다. 키토산 처리구에서 전당과 환원당의 감소율이 대조구보다 높은 현상은 키토산 처리에 의하여 생체 대사가 보다 활성화되기 때문이라 생각되며, 키토산처리에 의하여 발아율이 높고, 배축의 신장도가 높은 현상과 관련이 있는 것으로 판단된다. 유리아미노산은 재배 5일째 자엽과 배축의 유리아미노산 함량을 분석한 결과 aspartic acid의 함량이 가장 많았으며, 대조구의 경우 자엽에서는 25.4 mg/100 g-f.w, 배축에서는 88.2 mg/100 g-f.w이었다. 키토산처리구의 경우는 자엽에서는 23.12 mg/100 g-f.w, 배축에서는 120.18 mg/100 g-f.w이었다.높은 항 곰팡이 활성을 나타내었다. 이 외에도 황련의 물 추출물은 M. miehei 균주에서 우수한 항 곰팡이 활성을 나타내었다. 생약재의 70% Ethanol추출물을 농도별로 제조하여 항 곰팡이 활성을 살펴 본 결과, 70% ethanol추출물에서는 계피와 파고지, 초두구, 황련이 항 곰팡이 활성이 우수하였으며, 특히 계피의 70% ethanol 추출물에서는 5가지 균종에서 모두 우수한 항 곰팡이 활성이 나타났다. 균을 제외한 5가지 균종에서 높은 항균 활성을 보였으며, 이외에 생약재는 강황, 석곡, 황련, 호장근의 70% ethanol 추출물은 4가지의 균주에 대해서 항균 활성을 나타내었다. 또한 파고지, 오미자의 70% ethanol 추출물은 3가지 균주에 대해서 항균활성을 나타냈으며, 천궁, 육두구, 오수유, 갈근, 계피, 가시오가피의 70% ethanol 추출물은 2가지 균주에 대해 항균 활성을 나타내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elemen

• Weed & Turfgrass Science
• /
• v.7 no.2
• /
• pp.148-157
• /
• 2018

Research was initiated to evaluate four domestic and overseas organic soil amendments (SAs) on turfgrass groundcover and density and to provide basic information on practical sports turf establishment. This study was conducted in Agrostis palustris Huds. (CB) grown in sand-based root zone. A total of 20 treatments of SA+sand were prepared by mixing 10 to 50% (v/v). These amendments were SABP (Berger Peat), SAEP (Eco-Peat), SAGS (G1-Soil), and SAPP (Premier Peat). Turfgrass groundcover and density significantly varied with SAs, its mixing rate to sand and week after seeding (WAS). Cumulative turfgrass density was variable, but a great change occurred between 2 and 4 WAS. Turfgrass density at 2 WAS ranged from 36.7 (SABP 30) to 89.7% (SAGS 20), being 53.0% in differences among treatments. However, CB reached to carrying capacity around 6 WAS. Thus, most treatments were similar to 90% or so in density. At the end of study, overall groundcover ranged between 60.7 (SAEP 10) and 96.7% (SAPP 50). Proper mixing rate was variable with SAs, being 10 and 20% for SABP and SAGS, respectively. But the optimum rate was 50% for both SAEP and SAPP.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.195-201
• /
• 2002

입고ㆍ예냉ㆍ출고까지 전 공정을 자동화하고 진공압력을 작물의 품온에 따라 능동적으로 제어할 수 있고 진공챔버내에 콜드트랩을 설치하여 냉각효율을 향상시킨 진공예냉장치를 개발하여 고랭지 배추와 느타리버섯, 상추를 대상으로 예냉성능을 평가하고 예냉이 이들 작물에 미치는 영향을 분석하였다. 가. 새로 개발된 진공식 예냉장치는 공급컨베이어, 좌우 자동 슬라이딩 문, 이송컨베이어, 진공챔버, 진공펌프 콜드트랩, 냉동기로 구성되어 있다. 팔레트를 공급컨베이어에 올려놓고 작동을 시작하면, 입구문이 열리고 팔레트가 진공챔버내로 이송되면, 진공펌프에 의해 진공챔버내의 압력을 떨어뜨리고, 콜드트랩과 냉동기가 작동되어 예냉이 시작된다. 예냉이 완료되면 출구문이 열리고 이송컨베이어가 역회전하여 밖으로 배출되도록 되어있다. 나. 제작된 예냉장치의 예냉성능을 평가하기 위하여 느타리버섯, 고랭지 배추, 상추를 대상으로 냉각속도, 냉각균일도, 예냉후 저장중 품질변화시험을 실시하였다. 다. 시험결과 냉각소요시간은 느타리버섯의 경우 초기품온 15.2$^{\circ}C$에서 $1.5^{\circ}C$까지 냉각시키는데 24분, 고랭지배추는 13.5$^{\circ}C$에서 3.7$^{\circ}C$까지 냉각시키는데 18분, 상추는 13.4$^{\circ}C$에서 2.$0^{\circ}C$까지 냉각시키는데 24분 소요되었다. 평균냉각속도는 느타리버섯이 34.3$^{\circ}C$/h, 고랭지배추 32.6$^{\circ}C$/h, 상추 28.5$^{\circ}C$/h로 나타났다. 라. 또한 각층간의 냉각균일도를 알아보기 위하여 포장상자내에서 표면 품온과 내부품온변화를 조사한 결과 차이가 거의 없어 균일한 냉각이 가능하였다.생기 양단의 온도차는 높게 나타났고, 재생기 양단의 압력 차는 낮게 나타났다. 재생기 축열재로서 철망-철선을 사용할 경우 철선-철망 ø1.2-150이 전열 표면적은 작으나 재생기 양단의 온도차가 가장 큰 것으로 나타났으며 재생기 양단의 압력 차는 가장 낮게 나타나 공시 철망- 철선 혼합 축열재중 가장 우수함을 알 수 있다. 4. 철망사이에 철선을 삽입한 축열재의 경우, 철망사이에 삽입한 철선의 직경이 큰 것이 철선의 직경이 작은 것보다 재생기의 양단의 온도차가 높게 나타났고 재생기 양단의 압력차는 작게 나타났다. 그러므로 철망사이에 철선을 삽입한 것 중 성능이 우수한 것은 150-ø2. 0-150으로 나타났다. 5. 실험한 재생기 축열재들 중에서 성능이 우수한 것들을 비교한 결과, 복합 철선 ø1.2-1 50이 가장 성능이 좋은 것으로 나타났다.적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And th

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.272-279
• /
• 1997

Chemical properties of soils and mineral contents in plants grown at seventy one regions located in southern part of Korea were surveyed to obtain the basic information for sustainable management of plastic film house soils. The averaged soil chemical properties showed optimum levels in pH, organic matter, available boron, manganese, zinc contents, whereas available phosphate and exchangeable rations were highly accumulated. Available phosphate showed highly positive correlation with continuous cropping period. The contents of phosphate, potassium, calcium, and magnesium in the top soils were ranged from 912(Pusan)~1.796mg (Masan) ; $1.52(Pusan){\sim}2.93cmol^+$(Sunchon) ; $7.44(Masan){\sim}18.58cmol^+$(Changweon) ; $2.82(Changnyong){\sim}6.24cmol^+/kg$(Changweon), respectively. There were high levels of phosphorus and potassium in the leaves of plastic film house plants of pepper, cucumber, pimento, chrysanthemum, and carnation. And calcium and magnesium were more than two fold high in fruiting vegetables than flowering plants showing antagonistic utilization against potassium.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.111-118
• /
• 2014

The present study concerns the leachability of alkali ions from hardened cement paste in terms of an increase in the pH together with the rate of alkali leaching. To evaluate the influence of mix design on the leaching capacity and rate of alkali, different water-cement ratios (W/C) and binders were used to manufacture paste specimens. The cement paste was made in the form of rectangular bucket where deionised water was subsequently supplied as solvent media. Then the specimen was wrapped in polythene film to avoid contact to atmospheric conditions, which may affect the water chemistry in the bucket. The pH of media was monitored until no further change in the pH value was observed, of which value then used to calculate the leaching capacity and rate. The influence of binder on the pH of solvent is more dominant than that of water to cement ratio: OPC paste produced the highest level of alkali leaching, whilst 30% PFA and 60% GGBS pastes imposed lower level of alkali leaching. After the monitoring of the pH, the inner bucket was ground with an increment of 1.0 mm to measure the leaching influence using the suspension consisting of paste powder and deionised water. It was found that the impact zone for OPC was about 7-8 mm, whilst 30% PFA and 60% GGBS had deeper impact depth of the alkali leaching.