• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.101-104
• /
• 2003

Although lung transplantation has been accepted as the most effective treatment for end-stage pulmonary emphysema, it is not only very hard to find a donor but also to obtain a relatively healthy lung. Furthermore, it is more difficult to match the size of the allograft, considering the height, the weight, and the size of the thoracic cage. The single lung transplatations for the end-stage emphysema have been more commonly performed than bilateral lung transplantation due to the shortage of the donors and the long-term survival rate of the single lung transplantations has shown no reasonable difference compared with that of the bilateral lung transplantationh. Recently, the functional criteria based on a comparison of predicted TLCs(Total Lung Capacities) of the donor and recipient according to height, sex and age, have been accepted at a more suitable.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.67-71
• /
• 2003

Sawing silicon ingot with abrasive slurry generates sludge that includes abrasive powders, cutting oil, and silicon powders. The abrasive powders and cutting oil are being separated and reused. Mixing the remained stodged silicon powders with carbon powders and subsequent heat-treatment are conducted to produce silicon carbide. The size of SiC whiskers and powders was smaller than the conventionally grown silicon carbide whiskers that were synthesized by adding micron-size metal impurities. Impurity related mechanism is attributed to the formation of the silicon carbide whiskers, as metal impurities are contained in the stodged silicon powders.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.36-45
• /
• 2015

In this study, various sizes of waste ground rubber tire (WGRT) were devulcanized by a single screw extruder equipped with a sonicator in front of the die, and waste PP and devulcanized waste ground rubber tire (DWGRT) composites were prepared by an intermeshing co-rotating twin screw extruder. The crosslink density and percent devulcanization of WGRT and DWGRT for 40, 80 and 140 meshes were calculated. The mechanical properties of the composites were compared with each other. The effect of SEBS-g-MA as a compatibilizer was investigated on mechanical properties of both waste PP/WGRT and waste PP/DWGRT composites. The crosslink density was decreased with decreasing the WGRT size. On the other hand, the percent devulcanization was increased by adding the smaller size of WGRT. Also, tensile strength, impact strength and elongation at break of the composite with DWGRT were higher than those with WGRT. Especially, mechanical properties of the composites were significantly increased by adding the smaller size of WGRT and DWGRT. Addition of SEBS-g-MA into both waste PP/(D)WGRT composites exhibited better impact strength and elongation at break than the composites themselves.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.425-427
• /
• 1999

본 논문에서는 시간 간격을 두고 활영한 흉부의 단순 x선 영상의 차영상을 이용하여 컴퓨터 도움 진단에 활용할 수 있는 방법에 대해 연구하였다. 시간 간격을 두고 촬영한 흉부 단순 x선 영상의 차영상은 시간에 따른 변화를 명확히 보여줌으로써 질병의 조기진단 및 질병의 전개과정 등을 알아보는데 유용하게 쓰일 수 있다. 특히, 이 방법은 폐암과 같이 조기진단이 매우 어려운 질병에 대하여 정기검진 등에서 정기적으로 촬영한 단순 x선 영상을 이용하여 조기진단을 할 수 있는 방법으로 활용될 수 있다. 그러나, 촬영시의 여러 가지 조건들, x선의 세기와 조영시간, 환자의 촬영 자세 및 호흡 상태 등에 따라 단순 x선 영상이 크게 달라져 단순한 뺄셈에 의한 차영상은 진단에 도움이 되지 못한다. 진단에 도움을 주기 위해서는 두 영상 사이의 전체적인 밝기와 대조도를 맞추고 늑골, 쇄골 등 해부학적 구조물의 위치와 크기를 서로 맞추어 차영상을 얻는 영상처리 방법이 필요하다. 또한, 폐의 크기와 위치도 서로 맞추어 차영상을 얻어야 한다. 그러나, 이러한 방법도 늑골과 폐의 크기와 위치 변화가 서로 일치하지 않는 문제점을 가지고 있다. 본 논문에서는 이러한 영상처리를 통하여 차영상을 얻는 방법에 대하여 논하고 방법상의 문제점과 해결 방법을 제시한다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.4
• /
• pp.342-347
• /
• 2015

This study is basic experiment which prevents indiscriminate reclamation and recycles the wasted tire in order to solve environmental pollution according to generation rate of the wasted tire from recently industrial development. By applying as the substitute material of the lightweight aggregate among the constructional materials in order to evaluate the lightness of the wasted tire chip and suggest the recycling plan of the wasted tire chip. The prior experiment did the replacement ratio of the wasted tire with 20%, 40%, 60%, 80%, 100%, etc. and made a study on the strength and density properties. Based on the prior experiment of wasted tire, the replacement ratio was fixed at 15, 20, 25%, particle size of wasted tire was fixed at 0.2, 0.8, 1~2, 3~5, 5~7(mm). As a result, it is supposed that the best replacement ratio and particle size are 15% and 1~2mm, respectively.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.329-330
• /
• 2001

대기오염물질은 입자상물질과 가스상물질로 구분되는데, 이 중 입자상물질은 시정을 감소시키고 인체 건강에 유해한 영향을 미친다. 일반적으로 입자크기가 큰 거대입자는 인체 호흡기관에서 대부분 차단되거나 다시 밖으로 나오게 되지만, 입자크기가 작은 미세입자의 경우 대부분 폐의 깊은 곳에 침착하여 인체에 매우 유해하다. 이러한 미세입자의 유해성 때문에 우리나라도 1995년부터 PM10에 대한 대기환경기준을 설정하여 그 양을 규제하고 있다. 최근에는 폐에 높은 침착률을 보이는 PM2.5에 대한 관심이 집중되고 있다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1996.10a
• /
• pp.59-59
• /
• 1996

막분리에 의한 폐윤활유 재생공정을 개발하기 위한 기초 연구로써 폐윤활유 분리/재생용으로 적합한 복층(multilayer)세라믹 복합막의 제조와 합성막의 폐유 분리 효율등이 연구되었다. 결함이 없고 두께가 균일한 지르코니아 복합막 (기공크기 0.07 $\mu$m 이하)은 압출 성형법으로 제조한 튜브형 $\alpha$-알루미나 담체 (외경 7.8 mm, 두께 0.6 mm, 기공크기 0.7 $\mu$m)내부표면에 역침지 인상법(reverse dip-drawing technique)에 의하여 지르코니아 슬러리를 코팅 한 후 950$\circ$C에서 1시간 열처리하여 제조 되었다. 또한 지르코니아 복합막 위에 니타니아 졸-겔 코팅을 한 후 450$\circ$C에서 2시간 열처리하여 기공크기가 15 nm정도인 3층 복합막을 제조 하였다. SEM, Bubble Point Test, Mercury Porosimeter 그리고 분획 분자량 측정등에 의하여 복합막의 코팅층 두께, 결함유무 및 막의 기공크기등을 분석하였다.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.28-35
• /
• 2003

The powder utilization is the one of the best recycling methods for the waste tires. However, economic problem still exist. In order to overcome an economic problem the ground rubber particles are surface modified, which induced to the rubber particles that have good mechanical properties and higher compatibility. In this study, we investigated ultrasonic treatment and reduced rubber particle size. Results showed that sulfur cross-linkage network of the waste rubber is changed by the ultrasonic treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.52 no.4
• /
• pp.330-337
• /
• 2002

Background : A pulmonary tuberculoma is one of the most common causes of a solitary pulmonary lesion. Treating a tuberculoma is still controversial and there are few reports on antituberculosis chemotherapy. In this study, the clinical findings and changes in the size of tuberculomas on a radiograph after completing antituberculosis chemotherapy was investigated. Methods : The medical records, an chest radiographs of 18 pulmonary tuberculoma patients who were admitted to the Gachon medical school, Ghil medical center between April 1998 and August 2001, were reviewed. The symptomatic changes were recorded and the size of the tuberculomas following treatment were compared. To compare the size, the long distance of each tuberculoma on the chest radiographs were measured and the additional radiological findings of calcification, satellite nodules and cavities were investigated. Results : Fifteen patients were men and 3 were women. The median age was 46 (24-74). Among these 18 patients, 14 patients had clinical symptoms. The other 4 patients were diagnosed incidentally as during a routine chest radiograph. The mean size of the tuberculomas on the initial plain chest film was $4.3{\pm}2.3cm$(range : 1.7-10 cm) and after 6 months treatment, it had decreased to $1.68{\pm}2.00cm$(range : 1.5-6.5 cm) (P<0.05). At least 6 months of antituberculosis chemotherapy resulted in the findings of a tuberculoma with a disappearance in 9, a decreased size in 4, and no change in 5 on the chest radiograph. Calcifications were found in 3 patients on the initial chest film and the chest CT and all calcified tuberculomas had disappeared after treatment. Conclusion : Although a pulmonary tuberculoma can remain as an inactive lesion for a long time, if it is confirmed by pathological or bacteriological methods, antituberculosis chemotherapy will be beneficial despite the presence of calcification.

• Membrane Journal
• /
• v.5 no.1
• /
• pp.16-25
• /
• 1995

먼지는 일반적으로 입자크기가 $10\mu\textrm{m}$ 이상의 강하 먼지와 $10\mu\textrm{m}$ 이하의 부유먼지로 구분하며, 이들의 먼지는 대기중에서 인간이나 동.식물에 주로 영향을 준다. 입자크기 범위가 $0.1~10\mu\textrm{m}$ 사이의 부유먼지는 주로 산업공정에서 연료의 연소 또는 고체상 물질의 분쇄 및 수송공정 등에서 주로 발생되며, 입자크기가 $2.5\mu\textrm{m}$이하인 것들은 대기중에서 황산화성 미세먼지와 질산화성 미세먼지로 전환되어 가시도(visibility)에도 큰 영향을 미친다. 대기중에 부유된 먼지중에서 $8\mu\textrm{m}$ 이하는 호흡시 호흡기로 유입되는 입자크기로써, 입자크기가 $6.0\mu\textrm{m}$ 이하인 것은 약 10% 정도가 인간의 폐내로 유입되고, $4.0\mu\textrm{m}$ 이하인 것은 30%, $2.0\mu\textrm{m}$ 이하인 것은 약 99%가 폐(lung)에 유입되어 폐에 침착된다고 보고하였다. 앞으로 산업발전이 계속됨에 따라서 먼지의 배출량이 계속 증가할 것이며, 이로 인해 먼지에 의한 대기오염이 심각해질 뿐만 아니라 인간에 미치는 피해도 심각해질 것으로 예측된다.