• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.503-503
• /
• 2010

국제협약에 따라 2012년부터 유기성폐기물의 해양배출이 금지됨에 따라 환경문제를 유발하는 축산분뇨, 음식물쓰레기, 농축산 폐기물 등의 처리가 곤란한 실정이다. 그러나 최근 저탄소 녹색성장으로 정부가 폐자원 에너지화에 관심을 기울이면서 위의 폐기물을 바이오가스로 전환하는 바이오가스 플랜트(Biogas Plant, BGP)의 이용이 보다 활성화 될 전망이다[1]. 이 바이오가스 처리방법에서 유기물은 메탄가스로 배출되고[2], 나머지 영양성분들(질소, 인산, 칼륨 등)은 모두 소화액에 남아있으므로[3] 이들은 친환경농업에서 필요한 액비로도 활용이 가능하며, 혐기소화 처리방법은 일반적인 가축분뇨 처리과정에서 발생되는 악취문제도 해결할 수 있는 장점 또한 가지고 있다. BGP는 유기성 폐기물에서 혐기성소화를 통해 바이오가스를 만드는 장점이 있는 반면, 가스를 만들고 남은 소화액은 액비로 활용이 가능하지만, 액비로 활용이 불가능할 경우 악성 폐수로 그 처리가 매우 까다로운 단점이 있다. 일반적인 생물학적인 폐수처리방법으로는 처리가 곤란하며, 환경기준을 맞추도록 처리하는데 많은 비용이 소요된다. 이러한 폐액처리를 위해 공정의 단순화와 높은 처리 효율[4]을 가지면서, 액비 또는 정화처리공정이 가능한 방법으로서 분리막공정이 바람직하나, BGP 발생폐액의 성상이 고농도의 오염물질을 함유하고 있어 적용이 쉽지 않다. 따라서 본 연구에서는 이를 보안할 수 있는 와류발생형 막모듈을 이용하여 Biogas Plant의 발생폐수에 대하여 분리막을 이용한 효과적인 처리공정을 개발하고 그에 따른 최적의 조건을 찾는 연구를 하고자 한다. 와류발생형 막모듈을 막과 막 사이에 와류를 발생시킴으로써 막에 전단력을 가하여 막의 가장 큰 단점인 막오염을 줄이는 방법으로 기존의 막모듈과 큰 차이가 있을 것으로 예상된다. 본 연구에서는 기존의 분리막 모듈[5]과 와류발생형 막모듈의 차이를 실험을 통해 확인하며, 막에 가해지는 압력, 막을 통과하는 유량 등의 차이를 두어 최적조건을 탐색하였다.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.121-126
• /
• 2003

The purpose of this work was to assess and quantify whether the beneficial effects in long-term gas exchange at exciting frequency were obtained at different frequencies as well and then to develop a vibrating intravascular lung assist device(VIVLAD), for Patients suffering from acute respiratory distress syndrome(ARDS) or chronic respiratory problems. We investigate the optimal condition of the frequency band excited with new vibrator at state of limit hemolysis when blood hemolysis came to through a membrane vibration action. The experimental design and procedures were given for a device used to assess the effectiveness of membrane vibrations. Quantitative experimental measurements were performed to evaluate the performance of the device . and to identify membrane vibration dependence on blood hemolysis. We developed an analytical solution for the hydrodynamics of flow through a bundle of sinusoidally vibrated hollow fibers that is used to provide some insight into how wall vibrations might enhance the performance of the VIVLAD. In the result, it was measured that the effect of various excited frequencies in gas transfer rate and hemolysis from the maximum gas transfer rate at no vibration when the maximum gas transfer rates showed at module type 6, module type 6 consisted of 675 hollow fiber membranes The maximum oxygen transfer rate was caused by the occurrence of maximum amplitude and transfer of vibration to hollow fiber membranes when it was excited by the frequency band of 7Hz at each blood flow rate. because this frequency became the End mode resonance frequency of the flexible in blood flow. Also, when module type 6 was excited at an excited frequency of 7Hz. blood hemolysis was low. Therefore, we decided that the limit of hemolysis frequency is 7Hz . because maximum amplitude occurred at this frequency.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.29-36
• /
• 2013

Although Korean domestic production of flat panel displays totalled more than 48 trillion KRW in 2007, most of the flat panel display wastes have been land-filled or incinerated, which greatly overshadows Korean national prestige as a world leading producer and developer of flat panel display devices. Countries such as Japan or EU possess quite limited land-fill capability and have sought ways to dispose of WEEEs from environment-friendly perspective rather than recovery of valuable materials from the wastes. Considering relatively short cycle of about 5 years for flat panel display devices, it is estimated that more than 5 million units will be accumulated as wastes by 2015. Urban mining is a most suitable countermeasures against China's monopoly of rare and rare earth metals, which are contained in flat panel display wastes. Therefore, materials recycling of waste LCD units has to be developed and commercialized soon enough for economic and environment-friendly recovery of valuable resources hidden in LCD wastes.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.45-52
• /
• 2019

This paper proposes the design of a closed-loop stepping motor drive for real-time Ethernet (RTE), which can be easily applied to a variety of RTE protocols. The proposed design is divided into a closed-loop step motor drive which can be reused for various types of RTE protocol and RTE module developed for each specific RTE protocol. It is based on a layered architecture so that the motion control algorithm can be easily reused independently of the RTE protocol and motion profile. To verify the proposed design, closed-loop motor drives based on EtherCAT and Mechatrolink III were developed and their performances were evaluated. Cycle time was measured to verify the real-time communication performance of the developed EtherCAT and Mechatrolink III based motor drive. As a result, the EtherCAT was 7.5 times faster than the Mechatrolink III when 32 motor drives were connected.

• Membrane Journal
• /
• v.33 no.2
• /
• pp.61-69
• /
• 2023

The technical importance of membrane-based artificial lung technology has been re-emphasized after the recent breakout of COVID-19 to treat acute lung-failure patients. The world population, particularly in Korea, is aging at an unprecedented rate, which can increase the demand for better artificial organs (AO) in the near future. Membrane technology plays a key role in artificial organ markets. Among them, membrane-based artificial lung (AL) technology has improved significantly in the past 50 years, but the survival rate of lung-failure patients is still very low. Most AL works focus on the clinical application of the AL device, not on the development of the AL membrane itself. This review summarizes the challenges and recent progress of membrane-based AL technology.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.798-801
• /
• 2009

소각로를 포함한 다양한 산업설비의 배폐열은 열병합 등의 다양한 방법을 통해 재활용되고 있으나 에너지의 효율적 사용과 편의성을 고려할 때, 단순한 온수공급 등의 방법보다는 전력으로서의 재활용이 매우 필요하다. 특히 재활용이 어려운 $400^{\circ}C$이내의 중저온급 폐열원을 발전할 수 있는 유력한 방안으로 열전발전기술이 최근 부각되고 있다. 열전발전은 발전모듈의 변환효율이 7~10%이고, 시스템 효율은 5%내외로 증기발전에 비해서는 낮지만 기계적 가동부분이 없어 고장발생이 적고 기동정지가 용이하며 열이 있으면 바로 발전이 가능한 차세대 친환경 발전기술이다. 본 연구에서는 현재까지 시도, 개발되지 못한 $100^{\circ}C$에서 $400^{\circ}C$내외 온도영역인 중저온급 소각폐열 회수를 위한 목적으로 중온용 열전발전소재 및 모듈과 저온과 중온에 각기 대응하여 폐열발전의 효용성을 높인 복식열전발전시스템을 개발 중에 있다. 본 고에서는 현재까지 진행된 일부 연구내용들을 소개하고자 하였다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.1
• /
• pp.88-93
• /
• 2010

In this paper, an edge detecting sensor using ultrasonic detection module is developed which will be used for areas of industrial applications such as plastic film winding system, cloth winding system, paper roll industry, etc. The developed sensor have properties that more exactly detect the edge line, that less affected by environmental noise, and that it produced more stable measurement output. The mass of the winding object is dominantly affect the dynamics of the system and it could produce undesirable result of the system such as stability of the closed-loop system and accuracy of edge-line-following-control(ELFC) objective. Also, there exist sensor noise due to the mechanical vibration or other environmental effect. These noise also degrade the efficiency of control system. In order to compensate these problems, this paper present a fuzzy PI/PID edge-line-controller, and which is designed and implemented.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.69-77
• /
• 2020

With rapid increasing production and installation, recycling of photovoltaic modules has become the main issue. According to the research, the accumulation of waste modules will reach to 8600 tons in 2030. Moreover, Crystalline-silicon (c-Si) Photovoltaic modules account for more than 90% of the waste. C-Si PV modules contain 1.3% of weight of photovoltaic ribbon inside which contains the most of lead, tin and copper in the PV modules, which would cause environmental and humility problem. This study provided a valuable metal separation process for PV ribbons. Ribbons content 82.1% of Cu, 8.9% of Sn, 5.2% of Pb, and 3.1% of Ag. All of them were leached by 3M of hydrochloric acid in the optimal condition. Ag was halogenated to AgCl and precipitated. Cu ion was extracted and separated from Pb and Sn by Lix984N then stripped by 3M H2SO4. The effect of the optimal parameters of extraction was also studied in this essay. The maximum extraction efficiency of Cu ion was 99.64%. The separation condition of Pb and Sn were obtained by adjusting the pH value to 4 thought ammonia to precipitate and separate Pb and Sn. The recovery of Pb and Sn can reach 99%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.3
• /
• pp.11-17
• /
• 1998

In this study, a procedure is presented for the dynamic analysis of a multibody tracked vehicle system. the planner tracked vehicle model used in this investigation is assumed to consist of two kinematically decoupled subsystems, i.e., the chassis subsys- tem and track sub-system. The chassis subsystem includes the chassis frame, sprocket, idler and rollers, while the track subsystem is represented as a closed kinematic chain consisting of rigid links interconnected by revolute joints. The recursive kinematic and dynamic formulation module of the vehicle will be developed.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.99-102
• /
• 2007

웹 사용 마이닝은 사용자의 웹 이용 패턴에 대해 분석하여 정보를 찾아내는 분야이다. 사용자에 대한 분석은 웹을 통한 비즈니스의 근간이 되고 있다. 때문에 웹 마이닝 분야에서 주목받고 중요시 되는 기술이 되었다. 그러나 최근에는 공개된 기술의 취약점을 이용해 악의적으로 정보를 교란하는 일이 발생되고 있어 사회적으로 이슈가 되고 있다. 이러한 문제는 특히 단순한 페이지 뷰 횟수에 기반을 둔 정보 추출 방식에 주로 발생하고 있다. 따라서 본 논문에서는 이러한 추출 방식의 단순함을 줄이고 사용자의 정보를 더 반영하기 위하여 페이지 이용 시간과 페이지 내의 행동을 분석하여 콘텐츠의 질을 평가하는 방안을 제시한다. 구현 부분에는 사용자의 개인정보 침해 없이 사용자의 행동을 수집하기 위하여 최근 인기를 얻고 있는 Ajax 기술을 사용하였다. 그리고 실시간으로 웹 페이지에 대한 평가를 수행하기 위해 서버에 로그 필터 모듈을 추가하는 수집 기법을 제안하였다.