• Journal of Biomedical Engineering Research
• /
• v.21 no.3 s.61
• /
• pp.311-320
• /
• 2000

In this paper a newly designed oxygenator module was used to perform the experiments for pressure drop and oxygen transport in order to evaluate the efficiency of the artificial lung. Also, distilled water. sodium sulfite solutions used in this experiment were evaluated for the performance of other artificial lungs. Substituted bloods have many advantages over whole blood in studying pressure drop and oxygen uptake. They are relatively inexpensive, and require fewer variables to be controlled. Furthermore, deoxygenation is not necessary when those solutions are used. In addition to these advantages. assays and interpretation of the experimental results are relatively easy. In the case of using the sodium sulfite solution having the same oxygen partial pressure as whole blood. the oxygen transfer rate of the sodium sulfite solution was basically same as that of whole blood. It was concluded in evaluating the function of artificial lungs that the sodium sulfite solution was suited for measuring oxygen transfer rate. In our module, artificial blood was flowed into the outside of hollow fiber membrane. The artificial lung created in this experiment showed that pressure drop was reduced to $1/3\~1/6$ of that compared to the inside-flow case.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.11a
• /
• pp.89-89
• /
• 2014

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.272-277
• /
• 2014

In this study the nanofiltration (NF) membrane treatment of a sulfuric acid waste solutions containing copper ion ($Cu^{+2}$) discharging from the etching processes of the printed circuit board (PCB) manufacturing industry has been studied for the recycling of acid etching solution. SelRO MPS-34 4040 NF membrane from Koch company was tested to obtain the basic NF data for recycling of etching solution and separation efficiency (total rejection) of copper ion. NF experiments were carried out with a cross-flow membrane filtration laboratory system. The permeate flux was decreased with the increasing copper ion concentration in sulfuric acid solution and lowering pH of acid solution, and its value was the range of $4.5{\sim}23L/m^2{\cdot}h$. Total rejection of copper ion was decreased with the increasing copper ion concentration, lowering pH of acid solution and decreasing cross-flow rate. The total rejection of copper ion was more than 70% at the experimental condition. The SelRO MPS-34 4040 NF membrane was represented the stable flux and rejection for 1 year operation.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.159-161
• /
• 2018

지난 수년 간 다량으로 배출되고 있는 폐 배터리를 에너지 저장장치(ESS)로서 재활용하고자 하는 연구가 활발히 진행되고 있다. 이러한 ESS 시스템에는 사용하는 배터리마다의 규격이나 이전 사용 시 수명, 배출 시 상태의 차이가 존재하기 때문에 각 배터리 간 셀밸런싱 시스템이 필수로 요구된다. 현재까지 직렬형, 병렬형 등이 연구되고 있지만 모듈화나 신뢰성 등을 만족 시키기 위해서는 병렬형이 유리하다. 본 논문에서는 양방향 리니어 레귤레이터를 사용하며 셀 벨런싱 회로가 없는 병렬형 충방전 시스템을 제안하고자 한다.

• Membrane Journal
• /
• v.26 no.5
• /
• pp.401-406
• /
• 2016

In this study, we have investigated the removal of the low level radioactive ions of Cs and I in water by the reverse osmosis (RO) process. The two RO modules produced in domestic region and the waste RO module after the cleaning process were selected. Then we compared removal performance of both Cs and I. The experiments are conducted by varying the concentration of feed, the pressure. As a results, it was confirmed that all three modules are higher I decontamination factor than Cs. And particularly, for the cleaned RO module, its decontamination factor of I was 1140. Since the results at low pressure condition were better than that at high pressure conditions, the use of the direct installation of RO modules on the tap water might be possible. In addition, it was confirmed that the waste RO module after cleaning process using EDTA, SBS and NaOH, increased the decontamination performance better than before cleaning, in particular, the recovery ratio after cleaning was 6.3% higher.

• Resources Recycling
• /
• v.25 no.2
• /
• pp.42-48
• /
• 2016

Although the generation of waste flat panel displays in Korea is expected to exceed one million sets in 2016, a comprehensive recycling technology has not yet been developed for effective recovery of valuable materials from the wastes, rendering to outshine the national prestige as a global leader in display industries. The overall aim of this study was to analyze the statistical data of various valuable materials and their ratio after dismantling 40-inch and 42-inch sized waste LCDs. The analysis results showed that plastic portion of the wastes was about 22% and the portion of PCB (Print Circuit Board) part was about 9% by weight whereas panel part was about 34% and leftovers including metals totalled about 35% by weight. Based on the analytical results, a higher value recycling process could be proposed with advanced material separation techniques.

• Elastomers and Composites
• /
• v.39 no.2
• /
• pp.131-141
• /
• 2004

The recycling of waste XLPE(crosslinked polyethylene), which is a major source of scraps from high voltage power transmission cables, has been discussed. The waste XLPE scraps were ground into fine powder with various sizes from less than $100{\mu}m$ up to about $1000{\mu}m$ using two types of tailor-made pulverizers. The compounds were prepared in a modular intermeshing co-rotating twin screw extruder at various conditions such as different compositions, types and powder sizes of waste XLPE, screw configurations and various polymer matrices (LDPE, HDPE, PP, PS). The mechanical and rheological properties and the fracture surface or the compounds were investigated. It was found that an improved impact strength was obtained from the compound with white XLPE powder pulverized from the scraps without outer/inner semi-conductive layers. Generally, the impact strength increases with the content of XLPE but decreases with the size of XLPE. Especially for LDPE, the extrusion was possible up to 80 wt% loading of XLPE. Also, the impact strength increases with the number of kneading disc blocks in the given screw configurations. The melt viscosity of the compounds increases with increasing XLPE loading. However, the higher shear thinning behavior of the compounds at common shear rates implies proper processibility of the compounds. In addition, the impact strength for other polymer matrices used increases with XLPE and it is noticeable that the impact strength of PS/XLPE (80/20 wt%) compound was improved twice that of pure PS.

• 전기의세계
• /
• v.45 no.1
• /
• pp.28-32
• /
• 1996

드라이브 기술의 최신동향 및 향후 전망에 대해 앞으로 전개될 항목을 간략히 요약하면 다음과 같다. 1. 모듈화 및 소형화 2. 직류 전압원의 고전압화 3. 드라이브와 NC간의 간편한 연결 4. NC의 조작화면을 통한 손쉬운 파라미터 조정 5. 디지탈 폐루프 제어 채용(FULL 디지탈화) 6. 에너지 절감형 모델 개발 7. 사용자 편의 기능의 확대 서보/스핀들 드라이브 설계기술의 최신동향 및 향후 개발 전망에 대해서 특징, 기능을 중심으로 이상과 같이 간략하게 설명하였다. 본고가 드라이브 기술 개발에 힘쓰는 관련 engineer들에게 조금이나마 참고가 되길 기대한다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.10a
• /
• pp.39-42
• /
• 1998

1. 서론 : 막을 경계로 접촉한 두 상(phase)간의 물질전달에 의해 물질을 효과적으로 분리해내는 막접촉기(membrane contactor) 방식은 추출이나 흡수에 적용되고 있다. 이것은 고전적인 충전탑이 갖는 접촉면적의 한계, 불안정한 유체유동의 단점을 가급적 극복할 수 있다는 측면에 있다. 막접촉방식의 하나인 막 흡수법의 경우, 흡수제(absorbent)를 정지시킨 contained(혹은, supported) liquid membrane 방식에서 인공폐의 원리를 기초로 독립적으로 분리시킨 흡수와 탈착모듈간의 계속 순환시키는 circulatory membrane absorber방식이 제안되었다.(생략)

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10a
• /
• pp.547-549
• /
• 2001

웹 기반 시스템의 테스팅에 대한 정확성과 신뢰성을 향상시키는 것은 시스템의 질을 향상시킬 수 있고 시스템 개발 및 유지보수에 대한 비용을 현저히 줄일 수 있다. 본 논문에서는 웹 로그 분석을 통하여 테스팅 환경 설정에 필요한 정보와 사용자들에 대한 패턴 정보를 추출하였다. 그리고 웹 컨텐츠 분석을 통하여 링크 정보와 데이터베이스에 대한 접근 또는 사용자 입력을 요구하는 모듈에 대한 정보를 추출하였다. 추출한 정보를 이용하여 테스팅을 위한 시나리오 문서인 테스트 스크립트를 생성함으로써 실세계에 근접한 테스트 시뮬레이션을 구현하는 방법을 제시하였다.