• Journal of the Korea Computer Graphics Society
• /
• v.3 no.2
• /
• pp.85-97
• /
• 1997

This study is intended to propose methods of iso-surfaces representation in visualizing the stress distribution in 3-dimensional solids computed by finite element method, and to develop efficient algorithms related to iso-surfaces, and also to exploit the practical application to various data visualizations. This paper suggests practical methods of creating and rendering iso-surfaces, and methods of surface smoothing which removes local irregularity on the surface. Also devised in this study are various methods of rendering stress distribution with the aid of iso-surfaces. Their effectiveness and usefulness have been tested and verified through actual implementaion of a finite element analysis software and case studies using the software.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9B
• /
• pp.1588-1595
• /
• 2000

To restore image degraded by out-of-focus blur and additivie noise a regularized iterative restoration is used. In concentional method, regularization is usually applied to all over the image without considering the local characteristics of image. As a result, ringing artifacts appear in edge regions and the noise amplification is introduced in flat regions. To solve this problem we propose an adaptive regularization iterative restoration using directional regularization operator considering edges in four directions and the regularization operator with on direction for flat regions. We verified that the proposed method show better results in the suppression of the noise amplification in flat regions, and introduced less ringing artifacts in edge regions. As a result it showed visually better image and improved better ISNR further than the conventional methods.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.2
• /
• pp.38-46
• /
• 1994

The method of JSME S001-83 and ASTM E813-87 have been adapted for evaluation of the elastic-plastic fracture toughness J sub(IC) of SB41 steel. This SB41 steel have the characteristics of low-stength CT specimens. The test results obtained have been considered and compared on the basis of resulted data from two kinds of methods(JSME S001-83, ASTM E813-87) and two kinds of specimen configurations(smooth, side-grooved). On the basis of results from consideration and comparison, the difficulties for its application were presented in case when the standard ASTM E813-87 method was employed for the measurement of J sub(IC) in SB41 steel. A modified method was applied for measuring J sub(IC) in SB41 steel that it used the blunting line real-measured by experiment instead of the standard blunting line theoretically determined, and the result from that procedure was analyzed and the usefulness of that method was examined and considered.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2002

Video stream invoke a variety of traffic with the structure of compression algorithm and image complexity. Thus, it is difficult to allocate the resource on the both sides of sender and receiver, and playout on the Internet such as a packet switched network. Thus, in this paper we proposed video stream smoothing using multistream for the effective transmission of video stream. This method specifies the type of LDU(logical data unit) according to the type of original stream, and then makes a large number of streams as a fixed size, and transfers them. So, the proposed method can reduce the buffering time which occurs during the process of the smoothing and prefetch be robust to the jitter on network, as well. Consequently, it has the effective transmission characteristics of fully utilizing the clients bandwidth.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.706-712
• /
• 1997

AlN(Aluminium Nitride) thin films were prepared using by RF sputtering method on the Si(100) and Si(111) substrates as the parameters of the substrate temperature, RF power, sputtering duration and the $N_2$/Ar ratio and investigated by X-ray diffraction, IR spectrometry, n&k analyzer. For the Si(100) substrate, the AlN thin films of (101) orientation were obtained under the conditions of room temperature and the nitrogen of 60 vol.%. For the Si(111) substrate, the (002) AlN thin films were obtained under the nitrogen of 100 vol.%. In case of the thin film prepared in the condition of above 60 vol.% of the nitrogen, the average value of the surface roughness of the film was 151$\AA$. From the changes of the half widths of E$_1$[TO] phonon bands at the wavenumber of 680$cm^{-1}$ /, it were compared of the crystallinities of the films which were grown under the different conditions. The thicknesses of AlN films were decreased dramatically in the region of the nitrogen of 40~60 vol.%. Its due to the nitridation of the Al target surface and getting low of the sputtering yield by the $N_2$/Ar ratio being increased.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.43-43
• /
• 2011

현대인들은 생활환경에서 발생하는 각종 미세먼지 등의 입자상 오염물질 뿐만 아니라 각종 VOCs 등의 가스상 오염물질과 곰팡이, 박테리아, 바이러스 등 생물학적 오염물질까지 생활공간 내의 공기환경은 점점 악화 되고 있으며 공기 정화 등의 필요성이 증대 되고 있다. 이에 본 연구에서는 닥 펄프와 활성탄이 주성분인 Sheet를 Corrugation 장치를 통해 편파형(골판지)으로 제작하고, 다시 다층 구조로 적층된 골판지 sheet을 제작한 후 이를 두께 방향으로 일정 폭(20mm이하)으로 절단하여 필터부품의 소자로 이용하는 활성탄 필터의 제조 및 그 특성을 확인하고자 하였다. 닥펄프/펄프와 무기물의 혼합비, 해리시간 등의 변화를 주어 샘플을 만들었고, 강도, 평활성, 생산성 향상을 위해 첨가보조제 선정을 하였다. 이렇게 제조된 필터의 물리적 특성을 알아보고자 인장시험을 실시하였고, 주사전자현미경을 통하여 필터의 평활성과 표면을 관찰하였고 흡착성능 및 기능성을 VOCs 방출량, 탈취율, 항균도, 곰팡이 저항성 등의 실험을 통하여 알아보았다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2015.11a
• /
• pp.96-99
• /
• 2015

본 논문에서는 중복되지 않는 서로 다른 카메라의 영상을 활용한 동일 객체 판단 및 추적 기술에 대하여 소개한다. 영상분석에서 색상 정보는 가장 기본이 되는 중요한 정보라 할 수 있다. 특히 색상 정보를 이용하는 히스토그램은 일반적으로 추적, 인식 등에 많이 사용되고 있으나 이동 객체나 조도 변화 등에 따라 성능에 차이를 보인다. 이러한 문제점을 해결하고자 본 연구에서는 동일 객체 판단을 위해 대표적으로 사용되는 히스토그램 정합의 두 알고리즘(HSV 공간에서의 Histogram matching 방법과 RGB 공간에서의MCSHR 알고리즘) 결합을 통해 분할 히스토그램은 객체를 3조각으로 나누어 전체와 각각의 히스토그램을 구하며 MCSHR을 RGB공간이 아니 Hue 공간 히스토그램으로 변경하여 유사도를 도출 하였으며 조도 변화에 강인한 모델을 만들기 위해 Controlled equalization기법을 사용하여 원 영상의 히스토그램의 확률과 평활화한 히스토그램의 확률 융합을 시도 하였다. 해당 실험의 비교 결과 기존 HSV공간에서 Histogram matching을 통한 유사도 비교보다 12.9% 향상된 정합율의 결과를 보였다. 또한 영상 정보와 스마트 기기를 통한 인식 방법의 융합을 통해 영상 내에서 동일 객체 판단에 대한 추가 정보 제공에 대해 방법론 적인 부분을 제안 하였다.

• The Korean Journal of Mycology
• /
• v.38 no.1
• /
• pp.25-28
• /
• 2010

New shiitake(Lentinula edodes) strain "Sanlim No. 7" was produced by Di-mon hybridization method. Bed-log cultivation of Sanlim No. 7 was performed. Fruit-body production was most at autumn and it is suitable to use as fresh shiitake rather than dried one. The fruit body is hemispherical shape, brown coloured and diameter of pileus is ca. 47 mm. Row of gill is straight, and its width is narrow. Optimum temperature of fruit-body formation was $11{\sim}23^{\circ}C$, and the fruiting is sporadic. The total amount of fruit-body production during 4 years(one generation) was ca. 1.4 kg/log.

• Journal of Chest Surgery
• /
• v.32 no.3
• /
• pp.326-329
• /
• 1999

Pulmonary lymphangioleiomyomatosis is a rare disease occurring almost exclusively in woman of reproductive age. It is characterized by rapid deterioration of respiratory functions and results in death within an average of 10 years. This disease is caused by a progressive proliferation of atypical smooth muscle in the pulmonary lymphatic vessels, blood vessels, and airways leading to the development of distal cystic changes which causes frequent recurrent pneumothoraces. We experienced a case of pulmonary lymphangioleiomyomatosis in a 30-year old woman who had a history of bilateral, recurrent pneumothoraces. The patient underwent lung biopsy through right thoracotomy which revealed the diagnosis of pulmonary lymphangioleiomyomatosis. We report a case with a review of the literature.

• Korean Journal of Veterinary Research
• /
• v.33 no.4
• /
• pp.617-622
• /
• 1993

The preliminary studies on the localization of adrenoceptors were performed on smooth muscle strips of bovine esophageal groove. The mechanical activity of the muscle strip was recorded isometrically in vitro.w In the bottom circular muscle strips. the excitatory ${\alpha}-adrenergic$ responses were not blocked by tetrodotoxin$(2.1{\times}10^{-6}M)$ and denervation which was carried by cold storage of strips for 48 hrs in Tyrode's solution at $5-6{^{\circ}C}$ without oxygen supply. These excitatory ${\alpha}-adrenergic$ responses were partially blocked by atropine. In the lip longitudinal muscle strips, the inhibitory${\beta}-adrenergic$ responses were not blocked by pretreatment of tetrodotoxin and atropine. The results suggest that ${\beta}-adrenergic$ receptors mediating relaxations are located on the postsynaptic smooth muscle cells, whereas ${\beta}-adrenergic$ receptors mediating contractions are located both in the smooth muscle cells and in the cholinergic neurones.