Preparation and characterization of AiN Thin Films by RF sputtering method

고주파 때려내기법에 의한 질화알루미늄 박막의 제작과 특성

  • 정성훈 (광운대학교 공대 전자재료공학과) ;
  • 김영호 (광운대학교 공대 전자재료공학과) ;
  • 문동찬 (광운대학교 공대 전자재료공학과) ;
  • 김선태 (대전산업대학교 재료공학과)
  • Published : 1997.08.01

Abstract

AlN(Aluminium Nitride) thin films were prepared using by RF sputtering method on the Si(100) and Si(111) substrates as the parameters of the substrate temperature, RF power, sputtering duration and the $N_2$/Ar ratio and investigated by X-ray diffraction, IR spectrometry, n&k analyzer. For the Si(100) substrate, the AlN thin films of (101) orientation were obtained under the conditions of room temperature and the nitrogen of 60 vol.%. For the Si(111) substrate, the (002) AlN thin films were obtained under the nitrogen of 100 vol.%. In case of the thin film prepared in the condition of above 60 vol.% of the nitrogen, the average value of the surface roughness of the film was 151$\AA$. From the changes of the half widths of E$_1$[TO] phonon bands at the wavenumber of 680$cm^{-1}$ /, it were compared of the crystallinities of the films which were grown under the different conditions. The thicknesses of AlN films were decreased dramatically in the region of the nitrogen of 40~60 vol.%. Its due to the nitridation of the Al target surface and getting low of the sputtering yield by the $N_2$/Ar ratio being increased.

Keywords