• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.22-28
• /
• 1992

Barium ferrite thin films were reactively deposited with Fe and BaO composite targets by a facing tergects sputtering unit. When thermally oxidized silicon wafers were used as substrates, minimum substrate heating of $750^{\circ}C$ was necessary for the perfect c-axis alignment in barium ferrite films. To lower the critical substrate temperature for the good c-axis alignment, such seed layers as ZnO, ${\alpha}-Fe_{2}O_{3}$ and ${\gamma}-Fe_{2}O_{3}$ were tested. The excellent c-axis algnment of BaM was obtained at a substrate temperature of $600^{\circ}C$ on ZnO seed layer whose (002) plane was parallel to the substrate surface. The magnetic properties of the BaM film showed saturation magnetization of 295 emu/cc, perpendicular coercivity of 1.7 kOe and squareness of 0.75. Optimum deposition rate of $230\;{\AA}/min$ was obtained with the composite target and this was 5 to 20 times higher than those of other investigators with oxide targets.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.4
• /
• pp.27-31
• /
• 1990

To calculate the lift of a thin lifting surface like the ship-rudder, it is popular to replace the lifting surface by a series of vortices. Two methods, which are vortex lattice method and mode function method, are frequently used to distribute the vortices on the lifting surface. In this paper, the intermediate way of two mentioned calculation method is carried out to exploit the merits of them. The basic concept of this method is to divide the lifting surface with several strips in span-wise and replace vortices to the chord-wise at each strips. A horn type semi-balanced rudder is chosen for the real method, and the validity of the proposed calculation is pursued by the open water test of the same rudder. Finall, this method is applied to the calculation of the interference between the two homogenous rudders siting parallel to the free stream.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.799-804
• /
• 2011

The LFLP (Linear Fresnel Light Pipe) system uses a linear Fresnel lens to follow the sun and concentrates the parallel sunlight into a line. A LFLP daylighting system has been developed and updated to a DBLP (Double Blind Light Pipe) daylighting system to improve the overall system efficiency in the morning and afternoon. The new design consists of a double-blind style with a cone-shaped light transformer. The blinds are used to collect the sun's altitude and azimuth movements through the day. Behind the two sets of blinds is the light transformer, which is based on a parabolic-shaped light concentrator. The light transformer is designed to efficiently deliver light within a thirty-degree radial spread so that the light pipe can internally reflect the light. The results of scale-model tests are encouraging, and the efficiency is three times higher than that of the previous LFLP system.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.129-133
• /
• 2001

In this paper, we studied structural and magnetic properties of Ba-ferrite thin film deposited on Si(100) substrate with TiO$_2$ underlayer. Ba-ferrite thin films with TiO$_2$ underlayer were deposited by reactive RF/DC magnetron sputtering system at room temperature. TiO$_2$ underlayer was reactive sputtered with $O_2$. After deposition, the thin films were annealed at vatious temperatures to get the crystallized sample. Underlayer was used to prevent interdiffusion from Ba-ferrite thin film to substrate. The growth of Ba-ferrite thin films was influenced by TiO$_2$ underlayer. Easy magnetization direction is in-plane. From these results the Ba-ferrite film with TiO$_2$ underlayer can be used as longitudinal recording media.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.21-30
• /
• 2005

In this paper, we propose lane detection and trackinB algerian using B-Snake as robust algorithm. One of chief virtues of Lane detection algorithm using B-Snake is that it is possible to specify a wider range of lane structure because B-Spline conform an arbitrary shape by control point set and that it doesn't use any camera parameter. Using a robust algorithm called CHVEP, we find the vanishing point, width of lane and mid-line of lane because of the perspective parallel line and then we can detect the both side of lane mark using B-snake. To demonstrate that this algorithm is robust against noise, shadow and illumination variations in road image, we tested this algorithm about various image divided by weather-fine, rainy and cloudy day. The percentage of correct lane detection is over 95$\%$.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.50-55
• /
• 2005

A method for measuring the wavefront error and the modulation transfer function(MTF) of large aperture optics using an unequal path interferometer is presented. A bidirectional shearing interferometer is used for collimation testing of the measurement system. A large aperture Fizeau interferometer with long optical path difference measures the wavefront error of the optics under test by using a $\Phi$ 400 mm off-axis parabolic mirror. The MTF is also measured at the wavelength of the interferometer by changing the laser light into partially incoherent light. Test results of a $\Phi$ 300 mm Cassegrain type satellite telescope made in Korea are presented.

• Journal of the Korean Society for information Management
• /
• v.27 no.2
• /
• pp.37-60
• /
• 2010

The purpose of this study is to investigate image search query reformulation patterns in relation to image attribute categories. A total of 592 sessions and 2,445 queries from the Excite Web search engine log data were analyzed by utilizing Batley's visual information types and two facets and seven sub-facets of query reformulation patterns. The results of this study are organized with two folds: query reformulation and categorical transition. As the most dominant categories of queries are specific and general/nameable, this tendency stays over various search stages. From the perspective of reformulation patterns, while the Parallel movement is the most dominant, there are slight differences depending on initial or preceding query categories. In examining categorical transitions, it was found that 60-80% of search queries were reformulated within the same categories of image attributes. These findings may be applied to practice and implementation of image retrieval systems in terms of assisting users' query term selection and effective thesauri development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.431-431
• /
• 2010

본 논문은 기존의 수은 형광 램프와 LED를 대체할 수 있는 무 수은 면광원의 방전 가스 조성 변화(He, Ne, Ar, Xe)에 따른 전기 광학 특성에 관한 연구이다.[1]~[4] 무 수은 면광원의 기본 구조는 그림 1과 같이 방전 공간 내에 유전체에 의해 방전 공간과 분리된 한 쌍의 평행한 전극으로 이루어져 있다. 그리고 방전 공간 내면에는 일정한 두께와 형상을 가지는 형광체가 도포되어 있고 주 전극의 반대 평판유리 외벽에 보조전극을 형성하였다. 방전을 발생시키기 위한 기본적인 구동 방법은 5~25kHz의 주파수와 $0.7{\sim}1.5{\mu}s$의 폭을 가지는 사각 펄스를 사용한다.[4] 그림 2는 Ne-Xe 가스를 기본으로 하여 He 첨가에 따른 전기 광학 특성을 보여준다. He 첨가량이 증가할수록 동작 전압이 높아지면서 방전 개시와 동시에 수축 방전으로 전이되는 형태를 보이며, 효율 또한 감소함을 보였다. 이것은 무 수은 면광원에서는 높은 He의 이차전자 방출 계수보다 He의 높은 이온화 에너지가 더 크게 작용하기 때문이라 생각된다. 그림 3은 Ne-Xe 가스를 기본으로 하여 Ar 첨가에 따른 특성을 보여준다. He과는 다르게 Ar 첨가량이 증가할수록 동작 전압 마진이 넓어진다. 그러나 동작 전압이 상승하고, 효율 역시 감소하는 단점이 있다. 이것은 Ar은 Ne에 비해 이온화 에너지가 낮지만 Ar-Xe 조합은 Penning 효과를 얻을 수 있는 혼합 가스가 아니며, Ar의 2차전자 방출 계수 역시 Ne에 비해 낮기 때문에 결과적으로 방전 전압은 상승하고 효율이 감소하는 결과를 보여준다. 그러므로 무 수은 면광원에서 낮은 구동 전압과 높은 휘도 효율을 얻기 위해서는 Ne-Xe 가스조건이 가장 적합한 가스 조건이다. 효율 개선을 위해서는 Ne-Xe 가스 조건에서 압력을 높이거나 높은 Xe 함량의 가스 조성비를 사용하여 자외선 발광원인 Xe 가스량을 높이는 방법이 가장 유리하다. 그림 4는 Ne-Xe 가스 조건에서 Xe 가스량을 높이면 효율이 증가하는 경향성을 보여준다. 가스 최적화 연구와 더불어 형광체 최적화 연구[5]를 통해서 Ne-Xe25% 100Torr 가스 조건에서 그림 5와 같은 19,000nit의 높은 휘도와 75lm/W의 고 효율 특성을 얻을 수 있었다.

• Korean Journal of Agricultural Science
• /
• v.8 no.2
• /
• pp.224-230
• /
• 1981

Threshing forces of seven varieties, that is, three Japonica type varieties-Irri 348, Irri 345, and Milyang 15, and four Indica type varieties-Milyang 23, Irri 342, Suweon 294 and Suweon 287-, which have been cultivated in the standard fertilization field being at Chungnam Provincial Office of Rural Development, Youseong, Chungnam-do, they were measured every other day in the period from September 28 to October 20 which were included the proper harves ting time. Also the threshing forces were checked in three-dimensional directions. Relationships between threshing forces and moisture contents of the unthreshed rice were examined in the laboratory as dried in the natural condition. The results of this study were as follows; 1. The mean threshing force of Japonica type varieties was about 1969r. and that of Indica type varieties was about 113gr. when external force was loaded in the direction parallel to the grain. 2. The threshing force bent to the grain was about 9.8through 28.2gr. equal to 7 through 21 percent to the threshing force parallel to the grain in Indica type varieties meanwhile about 59.8 through 115.0gr equal to 33 through 50 percent in Japonica type varieties. 3. Under the warmer temperature than $0^{\circ}C$, the change of threshing forces was not great in this experimental period on the harvesting dates. 4. The threshing force decreased s lightly as moisture content decreased in natural drying under the shade after cutting. 5. The threshing force of the lower portion was a little biger than that of the upper portion in an ear.

• The korean journal of orthodontics
• /
• v.31 no.4 s.87
• /
• pp.425-438
• /
• 2001

The delivery of optimal orthodontic treatment is greatly influenced by clinician's ability to predict and control tooth movement by applying well-known force system to dentition. It is very important to determine the location of the centers of resistance of a tooth or teeth in order to have better understanding the nature of displacement characteristics under various force levels. In this study, three dimensional finite element analysis was used to measure the initial displacement of the consolidated teeth under loading. The purpose of this study was to define the location of the centers of resistance at the upper six anterior segment. To observe the changes of six anterior segment, 200gm, 250gm, 300gm, and 350gm forces at right and left hand side each were imposed toward lingual direction. For this study, two cases, six anterior teeth and six anterior teeth after corticotomy, were reviewed. In addition, it was reviewed the effects of changes on the location of the center of resistance in both cases based on different degree of forces aforementioned. The results were that : 1. The instantaneous center of resistance for the six anterior teeth was vertically located between level 4 and level 5, which is, at 6.76mm, $44.32\%$ apical to the cementoenamel junction level. 2. The instantaneous center of resistance for the six anterior teeth after corticotomy was located vertically between level 4 and level 5, that is, at 7.09mm $46.38\%$ apical to the cementoenamel junction level. 3. Changes of force showed little effect on the location of the center of resistance in each case. 4. It was observed that the location of the instantaneous center of resistance for the six anterior teeth after corticotomy was changed more than the six anterior teeth without corticotomy to the apical part, and the displacement of the consolidated anterior teeth moved further in case of the consolidated teeth after corticotomy.