• Journal of the Korean Society of Radiology
• /
• v.18 no.1
• /
• pp.27-36
• /
• 2024

In this study, When acquisition thyroid scintigraphy images, a parallel hole collimator was applied, and the difference from the pinhole collimator was quantitatively analyzed under each image acquisition condition. Visual size, resolution, sensitivity, signal to noise ratio (SNR), and contrast to noise ratio (CNR) were evaluated using thyroid phantom and point source. When comparing visual size, it was confirmed that an image similar to the size of the pinhole collimator could be obtained only when a magnification ratio of about 2.00 to 2.09 times when applying a parallel hole collimator. There was no tendency in FWHM(mm) measurement using a point source, and sensitivity was high in the parallel hole collimator. SNR and CNR were high when using a low magnification ratio, matrix size of 128×128, and a parallel hole collimator. In images of similar size to the naked eye, when the matrix size was the same, both SNR and CNR were high in the pinhole collimator. Therefore, when performing a thyroid scintigraphy test, if appropriate conditions are set according to the situation of each hospital and a parallel hole collimator is applied, it can be a good option in terms of equipment utilization and work efficiency.

• Electronics and Telecommunications Trends
• /
• v.5 no.3
• /
• pp.52-59
• /
• 1990

통신신호가 통신회선을 통하여 전파될 때, 선로에 불평형이 나타나는 경우 가입자 선로와 대지간에 유도전류가 발생하여 대지로 흘러가게 되며 통신망의 성능에 영향을 미치게 된다. 본고에서는 통신회선의 불평형정도를 나타내는 평행도에 관하여 그 개념을 기술하고 각국에서 제시된 기준을 비교.분석한다.

• School Mathematics
• /
• v.18 no.3
• /
• pp.527-539
• /
• 2016

A word 'is' in "A parallelogram is trapezoid." is ambiguous and very rich when it comes to its meaning. In this paper, 'is' as in everyday language will be identified as semantic primes that can be interpreted in different ways depending on context and situation, and meanings of 'is' in mathematics will be discussed separately. Focusing on 'identity', 'is' will be reinterpreted in the view of equivalence relation and van Hieles' work. 'Is', as a mathematical sign, is thought to have a significant importance in producing mathematical ideas meaningfully.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4126-4130
• /
• 2012

In this paper, we proposed planar spiral inductors based on AC coupling for high-frequency wireless signal transmission. Design and characteristics of various structures of the inductor were analyzed. Capacitance between the inductors can be reduced by positioning two thin-film inductors in parallel. So two structures were proposed. First structure is inter-diagonal structure. This structure was made not to overlap the wire part of the paralleled two inductors. Second structure is On-chip type structure that the two thin-film inductors were in parallel but located on diagonal line not to face each other. The resonance in this structure was reduced from twice to once by increasing horizontal distance between the two thin-film inductors, because the capacitance effect between the two thin-film inductors decreases when the distance between the two inductors increases.

• The Korean Journal of Applied Statistics
• /
• v.12 no.1
• /
• pp.97-107
• /
• 1999

프로파일 분석은 반복측정 자료를 분석하는데 있어서 널리 사용되는 다변량 분석모형이다. 프로파일 분석에서는 처리 그룹간의 비교와 반응 프로파일의 평행성 검정을 위해서 4가지 검정통계량이 널리 사용되고 있다. 이들 검정통계량은 Wilks의 통계량($\Lambda$), Pillai's Trace 통계량(V), Hotelling-Lawley Trace 통계량(U), Roy's Maximum Root 통계량($\Theta$ )이다. 그 동안 이들 통계량들을 비교하기 위한 여러 연구가 있었지만 주로 일반적인 다변량 분산분석 모형에 근거한 비교였다. 본 논문에서는 자료가 반복측정 자료이고 우리의 관심이 프로파일 분석에 있을 때에 이 4가지 통계량의 비교에 초점을 맞추었다.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.177-190
• /
• 2001

전통적으로 많이 사용하는 군집분석의 방법들은 개체간의 거리를 고려하여 이들을 분류해 내는 것이며, 따라서 거리 측정 방법에 따라 여러 형태의 군집분석 방법이 나타나게 된다. 어떤 방법을 적용하던 간에 그 결과는 고정된 수치로써 나타난다. 다차원 자료의 구조파악이 몇 개의 수치로 나타나게 되면 어쩔 수 없이 정보의 손실이 발생하게 된다. 이를 보완하기 위해 시각적 매체를 동원하여 다차원 자료의 구조를 파악하는 연구가 있었으며, 이를 시각적 군집분석이라고 명명하고 있다. 본 연구에서는 시각적 군집분석에 대한 기본적 개념과 이를 위한 통계 도형의 활용, 구현방법 등에 대해 살펴보기로 한다.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.193-200
• /
• 2014

Research on flow channel designs of the separate plates is necessary to improve the PEMFC performance. On concerning the performance improvement of PEMFC, many recent studies have been made on the interdigitated flow channel using forced convection. In this paper, the interdigitated flow channel is similarly applied on the parallel flow channel with a baffle or baffles. Numerical analysis is performed by using a commercial multiphysics program, which is called COMSOL, on the parallel channel with the fully blocked baffle(FBB) and there are three variables, the position of baffle, flow direction and flow velocity. Each power of the variables is resulted from the fixed 0.5V, the voltage from 80 percents of the maximum power. Finally, based on the full factorial designs(FFD), one of the design of experiments(DOE), each factor which has several levels lead to the conclusion. The analysis of the main effects and interactions of the factors is useful to find the most influenced factor to improve the power.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.467-472
• /
• 2020

Methods for deriving design input-parameters to ensure the stability of a structure on a common ground are generally well known. Folded metamorphic rocks, such as the study area, are highly foliated and have small faults parallel to the foliation, resulting in special research methods and tests to derive design input parameters, Etc. are required. The metamorphic rock ground with foliation development of several mm intervals has a direct shear test on the foliation surface, the strike/dip mapping of the foliation, the boring investigation to determine the continuity of the foliation, and the rock mass rating of the metamorphic rock. etc. are required. In the case of a large number of small foliation-parallel faults developed along a specific foliation plane, it is essential to analyze the lineament, surface geologic mapping for fault tracing, and direct shear test. Folded ground requires additional geological-structural-domain analysis, discontinuity analysis of stereonet, electrical resistivity exploration along the fold axis, and so on.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.410-410
• /
• 2003

실에 2차원 혹은 3차원적인 권축변형을 부여하고 이 변형을 적절한 방법으로 고정하며 섬유간의 상호 평행성을 저하시킴으로써 벌키성과 신축성이 부여된 실을 벌크가공사(bulk textured yarn)라고 부른다. 원리적으로는 물리적 변형을 이용하여 섬유간 평행성을 저하시키며, 이를 어떠한 수단으로 고정하는 것이다. 폴리에스터 원사에 대하여 널리 사용되는 방법 중 하나로 가연가공(false twist texturing)법을 들 수 있으며, 본보에서는 가연가공 히터의 온도변화에 따른 원사의 물성 변화에 대하여 분석하고 향후 이러한 기본적인 특성과 외관특성과의 상관성 유무를 확인하고자 한다. (중략)

• Electronics and Telecommunications Trends
• /
• v.14 no.5 s.59
• /
• pp.34-41
• /
• 1999

NRD(Nonradiative Dielectric) 도파로는 평행한 평판 전도체 사이에 유전체가 삽입된 간단한 구조를 가지는 도파로로 유전체 도파로의 불연속부나 벤딩(bending)에서 발생되는 복사신호를 평행평판 도파로의 차단 주파수 특성으로 인해 효과적으로 억압할 수 있으며, 유전체 도파로가 갖는 저 손실 특성을 이용하여 신호를 손실 없이 전송할 수 있기 때문에 밀리미터파 응용시스템에 적용 가능한 신기술로 널리 연구되어 지고 있다. 본 고에서는 이러한 NRD 도파로의 기본적인 동작원리에 대해서 알아보고 또한 NRD 도파로의 기술개발 동향에 대해서 정리하였다.