• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.5
• /
• pp.132-139
• /
• 2003

In this study, it is attempted to obtain the optimum size of holes in 15 square plate models where a hole exists on every quadrant of a plate, and to get eigenvalues by performing free vibration analysis for each model. Moreover, the specimen is produced from optimized square plate and eigenvalue of each plate is measured through the shocking load. And then the result is compared with that of finite element analysis. For free vibration analysis of the square plate, the boundary condition of finite element analysis and experiment is assumed as both ends clamped support. From the results of this study, it is known that more stable structures can be designed by changing the natural frequency which is dependent on the location of holes and further studies are considered to be necessary fur the basic design information.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.556-561
• /
• 2001

In order to investigate the vibration characteristics of fluid-structure interaction problem, we modeled two rectangular identical plates coupled with bounded fluid. The fixed boundary condition along the plate edges and an ideal fluid were assumed. An experimental modal analysis in order to extract the modal parameters of the system was performed. Finite element analysis was performed using ANSYS to verify modal parameters and analytic results were compared with experimental results. As a result, comparison of experiment and FEM showed good agreement and the transverse vibration modes, in-phase and out of-phase, were observed alternately in the fluid-coupled system. The effect of distance between two rectangular plates on the fluid-coupled natural frequency was investigated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.668-671
• /
• 1997

In order to investigate the vibration characteristics of fluid-structure interaction problem, we modeled two identical rectangular plates coupled with bounded fluid. The fixed boundary condition along the plate edges and an ideal fluid were assumed. A commercial computer code, ANSYS was used to perform finite element analysis and FEM solutions were compared with the experimental results to modify the finite element model. As a result, comparison of FEM and experiment showed good agreement, and the transverse vibration modes, in-phase and out of-phase. were observed alternately in the tluid-coupled system. The effects of distance between two rectangular plates and width to length ratio on the fluid-coupled natural frequency were investigated. And it was found that the ormalized natural frequency of the fluid-coupled system monotonically increased with an increase in the number of modes.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.671-675
• /
• 2000

In this study, an FRF-based structural damage identification method (SDIM) is proposed for plate structures. The present SDIM is derived from the partial differential equation of motion of the damaged plate, in which damage is characterized by damage distribution function. Various factors that might affect the accuracy of the damage identification are investigated. They include the number of modal data used in the analysis and the damage-induced modal coupling. In the present SDIM, an efficient iterative damage self-search method is introduced. The iterative damage search method efficiently reduces the size of problem by searching out and then by removing all damage-free zones at each iteration of damage identification analysis. The feasibility of the present SDIM is studied by some numerically simulated tests.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1145-1147
• /
• 1999

평판전극배열을 이용한 회전구동형 마이크로 액츄에이터의 구동력을 증대시키기 위하여 전극의 형상을 최적화 하였다. 기존 평판구동형 마이크로 액츄에이터의 형상을 변형시켜 반경에 무관하게 전극의 수직간격을 최소간격으로 일정하게 유지함으로서 구동력을 배가시키는 효과를 발생시켰다. 이러한 구동력의 증가는 결국 요구되는 변위를 만족시키면서 고유진동수를 증가시켜 마이크로액츄에이터의 구동성능을 향상시킬 수 있다.

• Proceedings of the SAREK Conference
• /
• 2005.11a
• /
• pp.335-340
• /
• 2005

Nonlinear and forced oscillations of supported viscous droplet were focused in the present study. The droplet has a free contact line with solid plate and inviscid fluid. Natural frequencies of a pendant droplet have been investigated experimentally by imposing the acoustic wave while the frequency is being increased at a fixed amplitude. The evaporation was observed at atmosphere pressure. The droplet was recorded throughout the entire evaporation process and transient variations of the volume was measured. The evaporation process of oscillating droplet with thermofoil has been also observed to investigate analyzing the resonance effect on the thermal characteristics of droplet. It is found that a pendant droplet shows the resonant behaviors at each mode similar to the theoretical analysis. During imposing the acoustic wave, the pendant droplet makes a rotating motion in its longitudinal axis which is a new shape oscillation mode. The evaporation rate of a pendant droplet at resonant frequency is significantly enhanced.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.31-34
• /
• 2006

A new continuum damage theory (CDT) has been proposed by Lee et al. (1996) based on the SEEP. The CDT has the apparent advantage over the other related theories because the complete constitutive law can be readily derived by simply replacing the virgin elastic stiffness with the effective orthotropic elastic stiffness obtained by using the proposed continuum damage theory. In this paper, the CDT is evaluated by the numerical experiment comparing the mode shapes and natural frequencies of a square plate containing a small line-through crack with those of the same plate with a damaged site replaced with the effective orthotropic elastic stiffness computed by using the CDT.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.2
• /
• pp.287-295
• /
• 1987

The general equation of equilibrium is presented for a stiffened plate on which the stiffeners having rectangular cross-sections are attached by one or both sides with arbitrarily angles. The principle of minimum potential energy is applied using the concept of adjusted-centroid to derive the equilibrium equation for the stiffened plate. Equivalent rigidities in the present theory are in good agreement with the experiments by the vibration method.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.40-46
• /
• 2003

In this research, we accomplished the interpreting about the vibration of the object, which is the out of plane displacement in the Electronic Speckle Pattern Interferometry(ESPI), one of the optical measuring technique. The vibrating object has a inherent nodal line, therefore we can get the information about the vibration of the object by interpreting it. we used a speaker and a cantilever plate for a measurement object, and interpreted it qualitatively by using the Time-Average ESPI. In this experimental result, the speaker has the lower mode of fringe at 550Hz, 570mV, and the higher mode of fringe at 950Hz, 570mV This ESPI is a non-destructive test, and because of using the laser at measuring, it has a high resolution. The ESPI can test vibration mode regardless of the test object size, because the area which illuminated laser is the test area.

• Journal of KSNVE
• /
• v.7 no.3
• /
• pp.477-488
• /
• 1997

In order to control vibration in structures, it is desirable to be able to identify dominant paths of vibration transmission from sources through the structure to some points of interest. Structural intensity vector(power flow per width of cross section) using cross spectra is able to measure the vibration power flow at a point in a structure. This paper describes the structural intensity measurement of 2-dimensional structure. Structural intensity of 2-dimensional structure can be obtained from eight point cross spectral measurement per axis, or two point measurement per axis on the assumption of far field. Approximate formulation of the relation between bending waves in structures and structural intensity makes it possible to separate the wave components by which one can get a state of the vibration field. Experimental results are obtained on an infinite plate at the near and far field in flexural vibration. The measurement error of two point measurement is rather bigger than eight point measurement on account of the assumption that Poisson's ratio is 1. The structural intensity vectors on the plate are checked the ability to identify the path of vibration power flow in random excitation and 200Hz sine excitation, the result of two point measurememt is almost the same as the result of eight point measurement in 200Hz sine excitation.