• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.868-876
• /
• 2006

2D input data have to be converted into 3D data by means of some functions and menu system in 2D input modeling system. But data in 3D input system for virtual spatial design can be directly connected to the 3D modeling data. Nevertheless, efficient surface modeling and deformation algorithm for the 3D input modeling system are not proposed yet. In this paper, problems of conventional NURBS surface deformation methods which can occur when applied in the 3D input modeling system are introduced. And NURBS surface deformation by 3D target curves, in which the designer can easily approach, are suggested. Designer can efficiently implement the virtual spatial sketching and design by using the proposed deformation algorithm.

• Journal of Korean Society of Transportation
• /
• v.28 no.5
• /
• pp.141-153
• /
• 2010

The study is about the development of operating speed prediction models aimed for an evaluation of design consistency of four lane rural roads. The main differences of this study relative to previous research are the method of data collection and classification of road alignments. The previous studies collected speed data at several points in the horizontal curve and approaching tangent. This method of collection is based on the assumption that acceleration and deceleration only occurs at horizontal tangents and the speed is kept constant at horizontal curves. However, this assumption leads to an unreliable speed estimation, so drivers' behavior is not well represented. Contrary to the previous approach, speed data were collected with one and data analysis using a speed profile is made for data selection before building final models. A total of six speed prediction models were made according to the combination of horizontal and vertical alignments. The study predicts that the speed data analysis and selection for model building employed in this study can improve the prediction accuracy of models and be useful to analyze drivers' speed behavior in a more detailed way. Furthermore, it is expected that the operating speed prediction models can help complement the current design-speed-based guidelines, so more benefits to drivers as real road users, rather than engineers or decision makers, can be achieved.

• Journal of Korean Society of Transportation
• /
• v.20 no.7
• /
• pp.95-105
• /
• 2002

Under a specific roadway alignment condition by design-speed standards, safety of the roadway is determined by an actual operating speed of a driver. This research takes first lanes of four-lane(hi-direction) rural highways as target facility. It also takes the straight and curved lanes of the selected highways for in-depth study. This study used NC-97 to detect speeds of passenger cars whose speeds are not affected by front vehicles. This research analyzed properties of 85th percentile operating speed at upstream of horizontal and through curves under various alignment conditions. The results show that 53∼65 Percent of drivers drive faster than the posted speed-limit (80KPH) by 14∼20 KPH on average. It also shows that the 85th-percentile operating speeds are the lowest at the middle point of curve length when curve radius is smaller. However, they are lowest at 1/4 point of curve length when curve radius is greater. Along roadways where curve radius is small, difference between upstream speed and the speed along the curve is considerably large. On the other hand. the speed difference is setting smaller as the curve radius is increasing. According to the results, significant variables affecting the 85th percentile operating speeds are curve radius and the 85th-Percentile operating speeds of upstream curves.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.8
• /
• pp.54-62
• /
• 2000

Adaptive filtering method is one of signal processing area which is frequently used in the case of statistical characteristic change in time-varing situation. The performance of adaptive filter is usually evaluated with complexity of its structure, convergence speed and misadjustment. The structure of adaptive filter must be simple and its speed of adaptation must be fast for real-time implementation. In this paper, we propose chirp discrete cosine transform (CDCT), which has the characteristics of CZT (chrip z-transform) and DCT (discrete cosine transform), and then CDCTLMS (chirp discrete cosine transform LMS) using the above mentioned algorithm for the improvement of its speed of adaptation. Using loaming curve, we prove that the proposed method is superior to the conventional US (normalized LMS) algorithm and DCTLMS (discrete cosine transform LMS) algorithm. Also, we show the real application for the ultrasonic signal processing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.26-32
• /
• 2019

The purpose of this study is to improve the running speed on a small-radius curved section on an existing train line. When the transition curve was extended, and the amount of movement in the horizontal direction tended to increase as the curve radius increased. The amount of increase in the transition curve extension was lowest when extending the curve radius, and the amount of horizontal movement was the lowest when changing the curve radius to a cosinusoidal curve. As a result of applying the pass rate after improvement to the Kyeongbu line, there was a time-shortening effect of 9.4 to 11.6% and a facial expression speed increasing effect when the curve radius was fixed and the transition curve was changed to a sinusoidal curve. In conclusion, the most effective way to improve the running speed on an existing train route is to change the image to concrete and to change the relaxation curve to a cosinusoidal curve. The amount of horizontal movement of the track is small, and the speed improvement effect is excellent.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.474-479
• /
• 2006

컴퓨터 기술이 발전함에 따라 3 차원 입력시스템을 통한 모델링이 가능하게 되었다. 2 차원 시스템은 평면 입력을 공간상의 데이터로 바꾸기 위한 많은 기능과 메뉴들이 존재하지만 3 차원 시스템에서는 그러한 복잡한 기능 없이 입력 데이터가 곧바로 모델링에 적용될 수 있다. 하지만 아직까지 3 차원 입력시스템에서 모델링을 수행하는 디자이너에게 익숙한 스케치 방법을 고려하지 못하고 있는 실정이다. 디자이너에게 가장 익숙한 모델링 방법은 스케치북에 선으로 그림을 그리는 것이기 때문에, 모델을 변형하는 방법은 이를 벗어나지 않도록 해야 한다. 평면 스케치에서 디자이너가 그리는 선은 모델의 윤곽을 잡아주고 모델의 특징이 되는 부분을 표현하게 된다. 이러한 선의 입력을 통한 스케치를 3 차원 모델링에서 그대로 사용하기 위해서는 공간에서의 점이나 면이 아닌 선의 입력을 모델링에 적용할 수 있어야 한다.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.220-229
• /
• 1997

The differential quadrature method (DQM) is applied to computation of the eigenvalues of the equations governing in plane and out-of-plane buckling. In-plane buckling and twist-buckling under uniformly distributed radial loads are investigated by this method. Critical loads are calculated for various end conditions and opening angles. Results are compared with existing exact solutions where available. The differential quadrature method gives good accuracy even when only a limited number of grid points is used. New results are given for two sets of boundary conditions not previously considered for this problem clamped-clamped and clamped simply supported ends.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.83-88
• /
• 2003

최근 수치영상은 사진측량의 기본원리를 이용하여, 각종 첨단 산업분야에 그 응용이 증대되고 있으며, 많은 관심과 연구가 진행되고 있다. 특히 가장 중요한 국가시설물인 도로 경우에기존도로의 설계자료나 수치지도가 없는 지역인 경우가 많아 그 자료들을 획득하는데 많은 비용이 소모된다. 또한 도로자료 획득시 도로에 교통량의 증가로 종래 측량방법으로는 상당한 어려움이 있다. 따라서 본 연구에서는 수치사진측량에 의한 도로선형정보체계 구축방법을 제시 하고자한다. 먼저 수치사진측량에서 취득된 자료들을 객체 지향적인 언어인 Delphi를 이용하여 도로평면선형정보와 도로종단선형정보를 구축하는 프로그램을 개발하였다. 개발한 도로평면선형정보는 기발표된 연구보다 IP값은 약 X,Y방향으로 약 2m정도 정확도가 향상되었고, 곡선반경(R)은 약 2.5m정도의 정확도향상이 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1397-1401
• /
• 2007

낙동강에 위치한 하회마을의 점사주는 상류에 안동 및 임하 다목적댐이 건설되면서, 수량이 조절됨에 따라 토사수리학적 특성이 상당히 변화되었으며, 식생이 발생하는 등 옛 모습을 상실해 가고 있는 지역이다. 이 연구는 낙동강의 중상류에 위치한 하회지구에 평면 이차원 하상변동 및 수질예측 수치모형인 KU-RLMS 모형을 적용하여 하회마을 앞의 점사주에 영향을 미치는 수리학적 특성 변화를 규명할 목적으로 수행하였다. KU-RLMS 모형은 하천 및 저수지의 국부적인 수리, 수질, 유사이동 해석을 위해 개발된 평면 이차원 비정상 수치모형이다. 직사각형 격자를 사용하는 유한차분법의 단점을 보완하기 위해, 흐름 계산을 위한 지배 방정식은 3차원 Reynolds 방정식으로부터 수심적분된 2차원 연속방정식과 운동량방정식을 불규칙한 경계를 현실적으로 모사할 수 있는 직교곡선 좌표계로 변환한 방정식을 사용한다. 안동다목적댐과 임하다목적댐의 방류량, 수공구조물 설치 여부 등을 고려하여 수치모의조건을 결정하였으며, 각 조건에 대한 흐름 변화특성을 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.265-274
• /
• 2018

The increasing use of curved beams in buildings, vehicles, ships, and aircraft has prompted studies directed toward the development of an accurate method for analyzing the dynamic behavior of such structures. The stability behavior of elastic curved beams has been the subject of a large number of investigations. Solutions of the relevant differential equations have been obtained traditionally using standard finite difference or finite element methods. These techniques require a great deal of computer time as the number of discrete nodes becomes relatively large under the conditions of complex geometry and loading. One of the efficient procedures for the solution of partial differential equations is the method of differential quadrature. The differential quadrature method (DQM) has been applied to a large number of cases to overcome the difficulties of the complex algorithms of programming for the computer, as well as the excessive use of storage due to the conditions of complex geometry and loading. The in-plane buckling of curved beams considering the extensibility of the arch axis was analyzed under uniformly distributed radial loads using the DQM. The critical loads were calculated for the member with various parameter ratios, boundary conditions, and opening angles. The results were compared with the precise results by other methods for cases, in which they were available. The DQM, using only a limited number of grid points, provided results that agreed very well (less than 0.3%) with the exact ones. New results according to diverse variations were obtained, showing the important roles in the buckling behavior of curved beams, and can be used in comparisons with other numerical solutions or with experimental test data.