• Journal of the Korean Geographical Society
• /
• v.40 no.3 s.108
• /
• pp.310-320
• /
• 2005

This study attempts at prototyping and evaluating a geovisualization tool that summarizes and explores human activity patterns using spatio-temporal trajectory data collected from GPS receiver. A set of core conceptualization developed in 'time geography' is successfully represented by our prototype based on the notion of 'space-time cube.' The notions of 'temporal dispersion cylinder' and 'parallel plane plot' are also implemented to allow funker analyses of human activity pattern on the space-time trajectory. The capabilities of the geovisualization environment we proposed include the interactive and dynamic functions that support a variety of explorations on the three components of spatio-temporal data : space(where), time(when), and object(what).

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.69-77
• /
• 2009

Small size and low profile antenna for mobile vehicular-top-mounted is needed in satellite communication services such as DBS, Satellite Internet and VSAT. In middle latitudes, the development of an array antenna which has the conformal, low profile and 45 degree beam tilted configuration, and has the high gain with sharp beamwidth, low sidelobe and low loss is required for Ka band satellite communication. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. Especially, for the lower sidelobe level the radiation power control using a design method of the different slot width is proposed. An array antenna consisting of 32 leakywave elements is showing 34.4 dBi of gain, 3.6 degree of beamwidth, below than -25 dB of sidelobe level, 43 degree of beam tilt angle in center frequency 20.0 GHz. Feed network designed by waveguide cooperated feed shows good performance of wideband and low loss.

• The Journal of Korean Institute of Information Technology
• /
• v.16 no.11
• /
• pp.77-84
• /
• 2018

In this paper, the circular polarization microstrip patch antenna using the T-junction power divider is proposed. The operating frequency of the proposed antenna is ISM band of 2.4GHz and the circular polarization is induced by feeding a phase difference of $90^{\circ}$ in two edges. The structure of the antenna consists of a general patch and a T-junction power divider. Furthermore, to optimize the proposed antenna, it is analyzed the reflection coefficient, the axial ration and the radiation pattern. The impedance bandwidth of the antenna is observed to be 40MHz within a range of 2.39 to 2.43GHz, similarly, the axial ratio bandwidth is observed having the bandwidth of about 12MHz in 2.398 to 2.410GHz range. The radiation pattern of the antenna is seen to be right circular polarization. Furthermore, the gain of the antenna is observed to be 2.04 and 3.4dBic at XZ and YZ-plane, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.440-458
• /
• 2019

Based on a 3D body data and pattern comparison analysis, this study developed a formal jacket pattern for men in their late 30s. In order to select the representative type of men in their late 30s, factor analysis and cluster analysis were conducted on data form 319 men, 35 to 39 years old using the anthropometric data from The 7th Size Korea (2015) as the representative body type. The surface of the body surface was developed using a 3D human shape of a male in his 30s in The 6th Size Korea (2010). Then the shape was changed to a flat pattern that confirmed the necessary elements for setting the shape and dimension. Cluster analysis revealed type B as the representative type because it showed the best shape characteristics for men in the late 30s. The drafting method of the final research pattern is as follows. Jacket length: stature/2.5cm, back length: stature/5+8.5cm (constant)], armhole depth: [stature/ 7-1.5cm (constant)], back width: [C/9+9.5cm (constant)]+1cm (ease), front width: [C/9+8.5cm (constant)]+1cm (ease), armscye depth: C/8, front waist darts: 1cm, front closure amount: 2cm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.12
• /
• pp.1588-1594
• /
• 2020

In this paper, we discuss a data balancing method for learning a neural network that generates digital holograms using a deep neural network (DNN). Deep neural networks are based on deep learning (DL) technology and use a generative adversarial network (GAN) series. The fringe pattern, which is the basic unit of a hologram to be created through a deep neural network, has very different data types depending on the hologram plane and the position of the object. However, because the criteria for classifying the data are not clear, an imbalance in the training data may occur. The imbalance of learning data acts as a factor of instability in learning. Therefore, it presents a method for classifying and balancing data for which the classification criteria are not clear. And it shows that learning is stabilized through this.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1110-1116
• /
• 2021

In this paper, we propose a conformal Ku-band data link antenna to ensure low RCS of stealth UAV. As a phased array antenna with electrical beam steering function, a transmitter and a receiver were designed and manufactured for FDD communication, respectively. Each antenna is designed as a 12*12 planar array antenna and has a function to form a uni-directional pattern and a bi-directional pattern through phase control of unit elements. The beam steering range is designed to be able to steer up to 60 degrees in theta direction and 360 degrees in the phi direction. As a result of manufacturing and measurement, the conformal type radome has low transmission loss and meets the required specifications including system performance. The feasibility of mounting the stealth UAV has been confirmed, and future research directions such as interworking of baseband devices and conversion to digital beam steering function are suggested.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.113-122
• /
• 2023

This study was conducted on the premise of the development of cultural products using relic assets of traditional culture in a knowledge and information society led by culture and soft power. It was conducted in the context of exploring the possibility of cultural content products of Wa-Dang relics excavated from traditional architecture in the Unified Silla Period and expanding the scalability of commercialization motifs that are highly useful in jewelry design. First, the original form, material, use, size, meaning, and formative aesthetics of Wa-Dang were identified through literature and media research. Among the considered Wa-Dang, 10 types of Wa-Dang which represent the category and have values in modules and patterns were selected, and, then, circular images were extracted and modularized with a "formal simplification technique." Based on the "mathematical symmetry analysis technique," which is a method of systematizing pattern composition arrangement format. we derived a planar formative element that can be used in the development of the cultural content industry and jewelry design. In order to expand its usability in the jewelry industry in the future, it was presented as a 2D digital image. In the future, we hope more studies on the various cultural content industry utilizing the traditional culture will be carried out.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1180-1183
• /
• 2011

In this paper, we present a design of AEM radome with frequency selective surface using unit-cell EM simulation method and verified the performance of AEM radome by the radiation pattern measurements of $16{\times}16$ array-antenna. Measured results under near-field condition showed a good agreement with the simulation and far-field measured ones. And there were no radiation pattern variation between antenna only and antenna with AEM radome. From these results, we verified that AEM radome with frequency selective surface can be a solution to reduce the RCS of conventional mast and radar.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.305-314
• /
• 2016

In this study, an analysis is performed for comparing the fractal dimension of Jackson Pollock's art works with that of Korean Infomel art works. In order to test the hypothesis that Jackson Pollock's fractal dimension is different from Korean Informel's, data is collected for the fractal dimensions of 30 Jackson Pollock's and 45 Korean Informel art works. The results show that Korean Informel's fractal dimension is larger than Jackson Pollock's. This might be interpreted that the pattern (in finer scale) of Korean Informel art works is closer to planes, rather than lines or points, compared to that of Jackson Pollock's.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1282-1290
• /
• 2000

The LHCP circularly polarized antenna operating at the satellite broadcast receiving band is developed by employing the sequential-rotation technique in which each truncated-corner patch square element is arranged in the triangular lattice type. Antenna designed with sequentially rotated technique of triangular lattice type has the effect of improved axial-ratio bandwidth, cross-polarization etc., and the degradation of radiation pattern can be reduced significantly by minimizing the radiation loss of feeding line structure. Characteristics of antenna designed is satisfied with specifications of array antenna for DBS that is -27 dB of side lobe level and -20 dB of cross-polarized level at $\Phi$=45$^{\circ}$ plane.