• Journal of the Korean School Mathematics Society
• /
• v.13 no.1
• /
• pp.1-21
• /
• 2010

This paper analyzed the contents and instructional methods of various plane figures presented mainly in a series of elementary mathematics textbooks on the basis of the analysis of related contents in the 2007 revised national mathematics curriculum. As such, this paper provided detailed analyses of how textbooks would implement the vision and intention of the curriculum, how the definition of each plane figure in the textbooks might be different from its mathematical definition, and how textbooks would introduce each plane figure. It is expected that the issues and suggestions stemming from this analysis will be informative in designing new instructional materials.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1799-1803
• /
• 2008

표면영상유속계는 하천 표면의 영상을 분석하여 유속을 산정하는 매우 실용적이며 간편한 장비이다. 그러나, 표면영상유속계를 이용하여 유량을 산정하고자 할 경우, 하천 표면의 평면 측량 자료와 하천의 단면 측량 자료가 반드시 필요하다. 이 때문에 표면영상유속계의 간편성과 유용성에도 불구하고, 이용자들이 쉽게 이용하기 어렵다는 그릇된 인식을 줄 수 있다. 만일 효율적이고 간편하게 하천의 단면을 추정할 수 있다면, 표면영상유속계를 마치 일반적인 프로펠러 유속계처럼 쉽게 이용할 수 있을 것이다. 이 연구는 일반적인 평면 측량없이, 두 대의 비디오 카메라로 이루어진 표면 영상 유속계를 이용하여 하천 평면을 계측하는 방법을 개발하는 것이다. 이를 통하여 표면 영상 분석 과정을 반자동화할 수 있게 된다. 두 대의 카메라를 이용한 평면 측량은 사진 측량 분야이나 컴퓨터 비전 분야에서 오랫 동안 연구되어 왔다. 이 기법을 표면영상유속계에 적용함으로써 간단하게 하천의 평면 좌표를 구할 수 있도록 하였다. 두 대의 카메라에 대해서는 직접 선형 변환법을 이용하여 내부 표정과 외부 표정을 수행하여 변환의 매개 변수들을 추정하였다. 추정된 변수들과 공간 전방 교회법을 이용하여 하천의 고정된 기준점들의 좌표를 측정한다. 측정된 좌표점들은 기울어진 영상을 연직으로 사영된 평면으로 변환하는 데 이용되며, 이 과정을 통하여 번거로운 하천의 평면 측량 과정을 생략할 수 있게 되었다. 온천천에 실제 적용하여 본 결과, 결과는 아직은 만족할 만한 정도는 아니나, 보다 정밀한 카메라의 보정 등을 통하여 보다 나은 결과를 도출할 수 있을 것으로 기대된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.127-136
• /
• 2007

In this paper, the equations of the scaled boundary finite element method are derived for non-homogeneous half plane and analyzed numerically In the scaled boundary finite element method, partial differential equations are weaken in the circumferential direction by approximation scheme such as the finite element method, and the radial direction of equations remain in analytical form. The scaled boundary equations of non-homogeneous half plane, its elastic modulus varies as power function, are newly derived by the virtual work theory. It is shown that the governing equation of this problem is the Euler-Cauchy equation, therefore, the logarithm mode used in the half plane problem is not valid in this problem. Two numerical examples are analysed for the verification and the feasibility.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12C
• /
• pp.1214-1221
• /
• 2005

In this paper, we propose a digital watermarking method for still images, in which the human visual system (HVS) is used in the discrete cosine transform (DCT) domain. The modulation transfer function (MTF) of the HVS model is employed to increase the invisibility of the inserted watermark in images. The proposed watermarking method is shown to be robust to several common image processing techniques, including lowpass filtering and cropping. Also, using the energy relationship of the DCT, we derive the equation that directly computes the watermark weighting factor in the DCT domain for the specified peak signal to noise ratio (PSNR) of the still image and the length of watermark to be inserted. The difference between desired PSNR and PSNR in spatial domain is within 0.07dB for the 7 test images.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.3
• /
• pp.39-47
• /
• 2017

The Depth Picture can be Encoded by the Plane Coding Mode that is the Method for Coding Mode by Considering a Part of the Picture as the Plane. In this Paper, we Propose the Method of Determining the Variable-sized Block for Variable Block Coding in the Plane Coding Mode for the Depth Picture. The Depth Picture Can be Encoded in the Plane Coding Through Estimating the Plane Which is Close to Pixels in the Block Using Depth Information. The Variable-sized Block Coding in the Plane Coding can be Applied as Follows. It Calculates the Prediction Error between Predicted Depths by the Plane Estimation and the Measured Depths. If Prediction Error is Below the Threshold, the Block is Encoded by Current Size. Otherwise, it Divides the Block and Repeats Above. If the Block is Divided Below the Minimum Size, the Block is not Encoded by the Plane Coding Mode. The Result of the Simulation of the Proposed Method Shows that the Number of Encoded Block is Reduced to 19% as Compared with the Method Using the Fixed-sized Block in the Depth Picture Composed of one Plane.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.68-73
• /
• 2018

In this paper, we propose an efficient algorithm for mapping a $360^{\circ}$ circular image to a planar image. The proposed algorithm consists of obtaining size of the planar image, calculating the distance between the camera and the planar image, calculating horizontal angle of camera and planar image, calculating vertical angle between camera and planar image, calculating the position of a pixel that matches pixels in a $360^{\circ}$ circular image to pixels in a planar image. Experiments were performed to evaluate the efficient algorithm for mapping the proposed $360^{\circ}$ circular image to the plane image. The reconstruction rate of the mapped plane image was confirmed 99% and the image quality of the mapped plane image was confirmed 72%. Since the results were higher than the standard values of commercial software, the effectiveness of the algorithm was confirmed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.3
• /
• pp.328-333
• /
• 2003

NGE (Nested Generalized Exemplars) proposed by Salzberg improved the storage requirement and classification rate of the Memory Based Reasoning. It constructs hyperrectangles during training and performs classification tasks. It worked not bad in many area, however, the major drawback of NGE is constructing hyperrectangles because its hyperrectangle is extended so as to cover the error data and the way of maintaining the feature weight vector. We proposed the OH (Optimizing Hyperrectangle) algorithm which use the feature weight vectors and the ED(Exemplar Densimeter) to optimize resulting Hyperrectangles. The proposed algorithm, as well as the EACH, required only approximately 40% of memory space that is needed in k-NN classifier, and showed a superior classification performance to the EACH. Also, by reducing the number of stored patterns, it showed excellent results in terms of classification when we compare it to the k-NN and the EACH.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.229-240
• /
• 2004

The purpose of this study was to evaluate the compensatory changes of occlusal plane angle in relation to skeletal factors. Lateral cephalograms of 61 adults with normal occlusion and 92 adults with skeletal malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of horizontal relationships, the normal occlusion group and malocclusion group were classified Into subgroups of skeletal Classes I, II, and III, while in terms of vertical relationships, each group was also classified into horizontal , average, and vertical subgroups. Some measurements were evaluated statistically by ANOVA and Post Hoc, and the others were reviewed by Paired t-tests. In this study, only the occlusal plane angle to AB plane did not show a significant difference between the normal occlusion group and malocclusion group. After treatment, the occlusal plane angle to the AB plane of the malocclusion group was approximated to that of normal occlusion group. The LOP to AB plane angle of the normal occlusion group was 91.7 in skeletal Class I, 88.8 in skeletal Class II, and 93.5 in skeletal Class III. This study was done to assess the treatment changes of the occlusal plane in the malocclusion group, and to draw a comparison with the normal occlusion group in order to present a reference to establish a new occlusal plane inclination.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.307-313
• /
• 2012

This paper proposes a hand-eye laser range finder (LRF) based welding plane recognition method for autonomous robotic welding. The robot welding is the process of joining a metal piece and the welding plane along the welding path predefined by the shape of the metal piece. Thus, for successful robotic welding, the position and direction of the welding plane should be exactly detected. If the detected position and direction of the plane is not accurate, the autonomous robotic welding should fail. For precise recognition of the welding plane, a line on the plane is detected by the LRF. For obtaining the line on the plane, the Hough transform is applied to the obtained data from the LRF. Since the Hough transform is based on the voting method, the sensor noise can be reduced. Two lines on the plane are obtained before and after rotation of the robot joint, and then the direction of the plane is calculated by the cross product of two direction vectors of two lines. For verifying the feasibility of the proposed method, the simulation with the robot simulator, RoboticsLab developed by Simlab Co. Ltd., is carried out.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.141-149
• /
• 1993

삼 자유도를 가진 부유물체의 동적 응답을 이론적으로 연구하였다. 평면내 방향 운동모우드에 대한 지배방정식을 선형화한 후, 그들의 조화해를 평명밖 방향 운동모우드의 방정식과 연성시켰다. 그렇게 해서 주어지는 방정식은 시간에 따라 변화하는 계수를 가진 형태로서, 평면밖 방향의 운동만을 보일 것으로 예측되는 부유물체가 평면밖 방향의 운동을 보일 수도 있음을 밝혔다. 동역학적 불안정성과 그 결과로 나타나는 평면밖 방향의 대진폭 운동을 보이고 있다. 본 결과는 주기적으로 동요하는 부유물체가 서로 연성된 운동을 하는 현상으로도 해석할 수 있다.