• Magazine of the Korea Concrete Institute
• /
• v.10 no.3
• /
• pp.107-115
• /
• 1998

반복하중을 받는 무근 및 철근 콘크리트 부재는 하중의 반복작용에 의해 과도한 균열 및 처짐을 유발하고 결과적으로 전체 구조요소의 파괴를 일으킨다. 따라서 하중반복에 의한 누적손상의 진행과정을 정량적으로 평가하여 철근콘크리트 보의 사용성과 안전성을 평가하는 것이 중요하고 특히 취성적 거동 특성을 갖는 전단거동의 경우에 더욱 의미가 있다. 본 연구에서는 반복전단하중에 의한 누적손상의 정량적 분석을 위하여 평균변형도 및 평균응력개념에 기초한 수정압축장이론(modified compression field theory)에 의하여 누적손상 모델을 제안하였다. 본 연구에서 제안된 모델을 통하여 반복전단하중에 의한 처짐과 변형도의 변화를 평가하는데 유용하게 이용될 것으로 사료된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.723-730
• /
• 2000

In this paper, we perform a performance analysis of serial acquisition scheme using AWGN rejection filter in Rayleigh fading channel and propose robust acquisition scheme using Reference filter, which is utilized to vary threshold at fading rate, in Rayleigh fading channel. AWGN rejection filter is utilized to evaluate running average for compensating channel gain. The JAKE model, which a channel model, is used for the analysis. The simulation result shows that the mean acquisition time of the proposed acquisition system is minimized than acquisition system using AWGN rejection filter and serial-search acquisition system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.33 no.2
• /
• pp.81-93
• /
• 2020

The fatigue characteristics of glass fiber reinforced plastic (GFRP) composites were studied under repeated loads using the finite element method (FEM). To realize the material characteristics of GFRP composites, Digimat, a mean-field homogenization tool, was employed. Additionally, the micro-structures and material models of GFRP composites were defined with it to predict the fatigue behavior of composites more realistically. Specifically, the fatigue characteristics of polybutylene terephthalate with short fiber fractions of 30wt% were investigated with respect to fiber orientation, stress ratio, and thickness. The injection analysis was conducted using Moldflow software to obtain the information on fiber orientations. It was mapped over FEM concerned with fatigue specimens. LS-DYNA, a typical finite element commercial software, was used in the coupled analysis of Digimat to calculate the stress amplitude of composites. FEMFAT software consisting of various numerical material models was used to predict the fatigue life. The results of coupled analysis of linear and nonlinear material models of Digimat were analyzed to identify the fatigue characteristics of GFRP composites using FEMFAT. Neuber's rule was applied to the linear material model to analyze the fatigue behavior in LCF regimen. Additionally, to evaluate the morphological and mechanical structure of GFRP composites, the coupled and fatigue analysis were conducted in terms of thickness.

• Journal of Korea Water Resources Association
• /
• v.48 no.9
• /
• pp.711-717
• /
• 2015

This paper attempts to measure the economic benefits of advanced water treatment in five cities (Goyang, Paju, Gumi, Gimcheon, Chilgok), which are supplied water from Goyang and Gumi filtration plant. We used the dichotomous choice contingent valuation method to estimate WTP. Parametric interval-data model are used to obtaining the mean WTP estimates. The results show that the mean of additional WTP for advanced water treatment services were estimated to be KRW 231.3 and KRW 231.2 per $m^3$ using model with covariates and without covariates, respectively. Given the water supplies of Goyang and Gumi filtration plants ($59.675m^3/y$ and $93.734m^3/y$), the economic benefits of those advanced water treatments can be expected to be KRW 13.8 billion and KRE 21.68 billion. And the calculated B/C ratios are 3.7 and 2.1 when a lifespan of facility is 10 years. Advanced water treatment should be introduced in terms of the economic benefits and costs. Thus, this results can be useful in water policy decision-making.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.617-619
• /
• 2018

In this paper, We suggest a face image generating GAN model which is improved by an additive discriminator. This discriminator is trained to be specialized in preventing frequent mistake of generator. To verify the model suggested, we used $^*Inception$ score. We used 155,680 images of $^*celebA$ which is frontal face. We earned average 1.742p at Inception score and it is much better score compare to previous model.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.214-219
• /
• 2011

We perform the frequency-domain waveform inversion based on the residual-selection strategy. In the residual-selection strategy, we classify time-domain residual wavefields into several groups according to the order of absolute amplitudes. Because the residual wavefields are normalized after regularization of the gradient directions within each group, the residual-selection strategy plays a role in enhancing the small-amplitude wavefields, which contributes to improving the deep parts of inverted subsurface images. After classifying residuals in the time domain, they are transformed to the frequency domain. Waveform inversion is performed in the frequency domain using the back-propagation technique which has been popularly used in reverse-time migration. The residual-selection strategy is applied to the SEG/EAGE salt and IFP Marmousi models. Numerical results show that the residual-selection strategy yields better results than the conventional frequency-domain waveform inversion.

• Korean Journal of Materials Research
• /
• v.8 no.6
• /
• pp.551-559
• /
• 1998

장경비가 큰 탄화규소를 탄소와 규소간의 고온연소반응으로 제조하기 위하여 공정변수에 따른 연소거동과 미세조직의 변화를 조사하였다. 연소합성된 생성물은 주로 $\beta$-SiC이며 연소반응이 충분히 진행되지 못하였을 경우에는 미량의 잔류 반응물과 $\alpha$-SiC가 관찰되었다. 생성된 탄화규소의 평균입도는 약 5$\mu\textrm{m}$로 작았으며, $1300^{\circ}C$ 이상의 예열 조건에서 장경비가 30이상인 탄화규소를 합성할 수 있었다. 압분 강도가 69MPa인 분말의 성형체에서 평균 연소 온도와 평균 전파 속도는 각각 약 $1425^{\circ}C$와 2.1mm/sec 범위이며, 연소 온도는 흑연 분말을 사용하였을 경우가 탄소 섬유를 사용한 경우보다 약 $10^{\circ}C$ 높았다. 연소 반응을 임의로 중단시킨 시편의 계면을 EDX와 Auger 전자 현미경으로 분석한 결과 상호 확산층이 관찰되지 않았다. 이는 탄화규조의 연소합성이 용해-석출 모델에 의하여 진행됨을 시사한다. 예열 온도에 따른 연소 반응 중의 온도 분포를 유한 요소법으로 해석함으로써 $2500^{\circ}C$의 초기 연소 개시 온도에 대하여 예열 온도 $300^{\circ}C$에서는 연소파가 거의 전파할 수 없으며 예열 온도가 $1300^{\circ}C$에서는 시료 내부에 자체 전파가 가능한 $2000^{\circ}C$이상의 온도 구역이 존재함을 알았다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.159-165
• /
• 2006

This paper deals with the estimation of geostrophic current using the sea surface topography calculated from the geoidal height from EGM96 geopotential model and the mean sea surface height from CLS_SHOM mean sea surface model. The CLS_SHOM model was developed using the altimetry data set. The estimation of geostrophic current is available in the characteristic research of ocean in many country, while for East Sea a few studies were done. The goal of this study is basically to provide the characteristics of geostrophic current in East Sea. The results show that the mean sea surface topography (SST) in East Sea is about 0.37 m and the mean geostrophic velocity is -0.028 m/sec. The Pacific water enters into the East Sea through the Korea Strait and after passing the strait, this inflow splits into two branches: one flows northward along the Korean coast and another outflows into Pacific ocean through Tsugaru and Soya strait passing the east-northeastward along the Japanese outer shelf, and outflows into Okhotsk ocean.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.181-190
• /
• 2005

The time required for airport process is considered more important as the airports are becoming bigger. International Civil Aviation Organization mattes this international standards and recommends not to exceed it. The passenger forecasting model is developed to predict the number of passengers at the check-in counter, and the area of formalities for departure and entry. In case of forecasting the number of outbound-passengers. the patterns of show-up lead time(SLT) at the check-in counter and lag time from check-in counter to the area of departure formalities are modeled in terms of time. On the other hand, the matter of the choice of check-in counters and areas of departure formalities are modeled in terms of space. In case of forecasting the number of inbound-passengers and transfer passengers, the time of airplane movement from arrival to block on at the gate and the time of passengers required from gate to the area of formalities for entry are modeled in terms of time. While the matter of the choice of gates and the areas of formalities for entry are modeled in terms of space. The average error of forecasting outbound-passengers and inbound-passengers is respectively 15% and 10%, which are considered excellent with the 5% error of passenger reservation information as input data. Through the development of passenger forecasting models, we assure we could provide passengers with valuable service because we allocate resource such as employees and equipments according to the degree of concentration of passengers.

• Journal of Digital Contents Society
• /
• v.16 no.5
• /
• pp.717-725
• /
• 2015

Prostate images have been used in the diagnosis of prostate using TRUS images being relatively cheap. Ultrasound images are recorded with 3 dimension and one diagnostic exam is made with a number of the images. A doctor can see 2 dimensional images on the monitor sequentially and 3 dimensional ones to diagnose a disease. To display the images, 2-d images are used with raw 2-d ones, but 3-d images need to be segmented by the prostates and their backgrounds to be seen from different angles and with cut images of inner side. Especially on detecting the boundary, the ones in the middle of all images are easy to find the boundary but the base and apex of the images are hard to do it since there are lots of uncertain boundary. So, in this paper we propose the method that applies an average shape model and detects the boundary, and shows its superiority compared to the existing methods with experiments.