• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.7
• /
• pp.664-672
• /
• 2009

In this paper we propose an on-glass antenna which consists of conducting dual center striplines and multi-loaded striplines. Multi-loaded striplines and dual center lines were employed for achieving a broad matching bandwidth and improving a vertical radiation gain, respectively. The detail design parameters were determined using the Pareto genetic algorithm with an full wave EM simulator. The optimized design was built and installed on a commercial vehicle, and the antenna performances such as the return loss and the radiation gain were measured in a semi-anechoic chamber. The measurement results showed the matching bandwidth($S_{11}$<-3 dB) of about 49 % in the T-DMB frequency band, the vertical gain of about -3 dBi along the bore-sight direction, and the average gain of about -10 dBi along the azimuth direction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.26-36
• /
• 2000

A circularly polarized $12\times12$ array with application in the satellite communications is designed at 10 GHz. The radiator is an aperture-coupled ring patch, which is suitable of large arrays. The element spacing of the array is chosen to be $0.7\lambda_0$to maintain the main beam in the broadside direction. The array is a sequential array constructed on a series-parallel feed network to obtain high gain and low axial ratio. Measurement results for the array, acquired by experiments in the compact range of POSTECH, showed a directivity of 27.88 dB, a high gain of 25.55 dB, an efficiency of 60%, an axial ratio of 1.74 dB, and a side-lobe level of -13 dB. The bandwidth of the array was 43% when the VSWR was 2, and the bandwidth of the axial ratio was 16%.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.27-37
• /
• 2001

The design, fabrication, and an experimental implementation of the strip patch antenna coupled with a H-shaped aperture arc presented in this paper. The proposed antenna has the wide bandwidth, high gain, and low cross-polarization levels. We measured the VSWR, smith chart impedance characteristic, co/cross polarization pattern, gain, and so on. The measured bandwidth of this antenna is 47.1 %. To reduce the back lobe and increase the gain, when the reflector is used, cross polarization level is below -18.2dB at E-plane and below 25.7 dB at H -plane. The maximum gain at 2.05 GHz is also 10.4 dBi and the 3 dB gain bandwidth with center frequency at 2.17 GHz is 24 %, which is the wide bandwidth. This antenna can find applications in mobile communication, wireless LAN, RF communication system, and so on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.301-307
• /
• 2015

In this paper, we consider wiretap channels in the presence of an eavesdropper assuming spatially correlated MIMO(multiple-input multiple-output) channels, where we analyze a physical layer security performance of orthogonal space-time block code(OSTBC) using one-bit feedback assuming cross polarized antennas at each node. In this paper, we present a method to select a transmit-antenna group for OSTBC using one-bit feedback(O-OSTBC) and compare secrecy outage probabilities of various transmit-antenna grouping methods. Especially, we propose an efficient transmit-antenna grouping method by comparing secrecy outage probabilities of O-OSTBC and conventional OSTBC in highly correlated MIMO channels.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.61-62
• /
• 2017

In this study, a circular polarization patch antenna operates at the wide bandwidth of 1.5GHz~1.7GHz was designed. To obtain the wide bandwidth and high gain, the high air substrate was applied. The impedance bandwidth is improved by adjusting the sizes of patch, the distance between main patch and ground plate, the length of internal slots, the position of feeding point, the length of external stub, etc. The antenna is designed by simulation for an operation in the frequency range of 1.5GHz~1.7GHz band, and the antenna characteristics such as return loss, gain, radiation patterns are examined.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1015-1022
• /
• 2023

In this paper, we propose DLP(Dual Linear Polarization) antenna with aperture coupled feeding structure for private network. The proposed antenna has general aperture coupled structure and design two port between top and bottom layer to obtain the enhanced isolation. Also, The size of each substrate(top and bottom layer) is 34.0 mm(W)×34.0 mm(L), which is designed on the FR-4 substrate which thickness (h) is 1.0 mm, and the dielectric constant is 4.4. Also, the size of patch antenna is 12.70 mm(W2)×14.60 mm(L3), and it is located on the top layer. The size of feeding line is 24.0 mm(W2)×1.6 mm(L3), and is located at the bottom layer Also, rectangular slot is located on the ground plane between top layer and bottom layer. From the fabrication and measurement results, bandwidths of 300 MHz (4.52 to 4.82 GHz) for feeding port 1, and 170 MHz (4.65 to 4.82 GHz) for feeding port 2 are obtained on the basis of -10 dB return loss and transmission coefficient S21 is got under the -30 dB. Also, cross polarization isolation between each feeding port obtained

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.629-636
• /
• 2011

This paper presents the design of a novel integrated T-DMB/GPS/Mobile antenna for vehicular application. The T-DMB antenna is designed with a modified meander-type microstrip patch providing linearly a polarized broadside radiation pattern. The GPS antenna is designed with an inserted slot in the patch antenna providing circularly polarized broadside radiation pattern. The Mobile (GSM, AMPS, DCS, PCS, UMTS, etc.) antenna is designed as a modified G-type patch antenna providing multi-band operation. Experimental results indicate that the impedance bandwidth (VSWR 1:2.5) of the proposed T-DMB /GPS/Mobile antenna satisfactorily matches that of the simulation results. The 2D and 3D radiation patterns and gains according to the results of the experiment are also presented and discussed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.06a
• /
• pp.153-154
• /
• 2017

본 논문은 DSTTD-SM(double space time transmit diversity with spatial-modulation)기법이 적용된 이중편파 MIMO 시스템의 수신 성능에 대하여 안테나 간 간섭 환경에서 분석하였다. 차세대 방송 시스템에서는 고품질의 영상을 전송하기 위하여 ATSC 3.0 에서 이중편파 MIMO 시스템을 채택하였다. 기존 MIMO 기법을 이중편파 MIMO 시스템에 적용하였을 때 시스템의 수신 성능에 대한 분석을 하기 위하여 본 논문에서 SM, STBC, STBC-SM 그리고 DSTTD-SM 의 수신 성능을 SUI 채널 환경에서 모의실험을 통하여 분석하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.369-377
• /
• 1998

In this paper, we performed the comparisons between polarization diversity using dual polarization antennal which has $\pm45^{\circ}$slanted linear polarization characteristics and conventional space diversity in rural and residential areas. The analysis was done by evaluating the diversity gain improvement and cross correlation coefficients between two received signals through each diversity branch. From the results, we could confirmed that space diversity has bigger diversity gain than polarization diversity by 1~2 dB, and there is a little difference of $\pm0.1$ in cross correlation coefficients by analyzing CDF under portable mobile phone environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.32-38
• /
• 2014

In this paper, we design a secant pattern antenna combined with a septum circular polarizer to be used in the satellite data communications. To generate a radiation pattern with secant type, Fourier relationship between current distribution and space factor is applied and the circular symmetric structure of the aperture simplifies the design. The optimization process is performed by combining the radiator with the septum circular polarizer, and it is confirmed that the designed radiation pattern, axial ratio, and return loss characteristics satisfies the required performance of the antenna.