• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.1
• /
• pp.137-144
• /
• 1984

In comparison to normal photography, oblique photography has large coverage area and is easily applicable to objects which are difficult to approach. But it has its deficiency of having to go through complex procedures of rectification. Oblique photographs are first analytically rectified, in this paper, then the coordinates of facilities are analysed.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.411-421
• /
• 2012

The stagnant growth in 3D market due to 3D movie contents shortage is encouraging development of techniques for production cost reduction. Elimination of vertical disparity generated during image acquisition requires heaviest time and effort in the whole stereoscopic film-making process. This matter is directly related to competitiveness in the market and is being dealt with as a very important task. The removal of vertical disparity, i.e. image rectification has been treated for a long time in the photogrammetry field. While computer vision methods are focused on fast processing and automation, photogrammetry methods on accuracy and precision. However, photogrammetric approaches have not been tried for the 3D film-making. In this paper, proposed is a photogrammetry-based rectification algorithm that enable to eliminate the vertical disparity precisely by reconstruction of geometric relationship at the time of shooting. Evaluation of proposed algorithm was carried out by comparing the performance with two existing computer vision algorithms. The epipolar constraint satisfaction, epipolar line accuracy and vertical disparity of result images were tested. As a result, the proposed algorithm showed excellent performance than the other algorithms in term of accuracy and precision, and also revealed robustness about position error of tie-points.

• Journal of Broadcast Engineering
• /
• v.18 no.1
• /
• pp.31-42
• /
• 2013

This paper proposes a photogrammetric rectification method based on Bayesian approach as a method that eliminates vertical parallax between stereo images to minimize visual fatigue of 3D contents. The image rectification consists of two phases; geometry estimation and epipolar transformation. For geometry estimation, coplanarity-based relative orientation algorithm was used in this paper. To ensure robustness for mismatch and localization error occurred by automation of tie point extraction, Bayesian approach was applied by introducing several prior constraints. As epipolar transformation perspective transformation was used based on condition of collinearity to minimize distortion of result images and modification for input images. Other algorithms were compared to evaluate performance. For geometry estimation, traditional relative orientation algorithm, 8-points algorithm and stereo calibration algorithm were employed. For epipolar transformation, Hartley algorithm and Bouguet algorithm were employed. The evaluation results showed that the proposed algorithm produced results with high accuracy, robustness about error sources and minimum image modification.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.2
• /
• pp.167-172
• /
• 1990

A number of studies for the improvement of the accuracy of the Loran C fix were carried out previously. But most studies were preformed when a ship was at anchorage, or in port. To investigate the accuracy of the Loran C fix when a ship was underway and in port, a series of observation was made on the route between Pusan and Cheju from Oct. 1988 to Oct. 1989. The obtained results are summerized as follows: 1. There is little difference in the accuracy of the Loran C fix by daytime and night, and the higher the mountain nearby ship, the greater the error of ship's position. 2. When a ship is at anchorage and underway, and the accuracy of ship's position is almost not affected by course while underway. 3. In order to promote the accuracy of the fixed position, a navigator must correct the propagation velocity and the geodetic system simultaneously, but in this paper the authors find that a most accurate position can be obtained by converting the geodetic system only.

• Journal of Korean Society of Transportation
• /
• v.18 no.6
• /
• pp.63-75
• /
• 2000

Stated Preference (SP) data has been regarded as more useful than Revealed Preference (RP) data, because researchers can investigate the respondents\` Preference and attitude for a traffic condition or a new traffic system by using the SP data. However, the SP data has two bias: the first one is the bias inherent in SP data and the latter one is the attrition bias in SP panel data. If the biases do not corrected, the choice model using SP data may predict a erroneous future demand. In this Paper, six route choice models are constructed to deal with the SP biases, and. these six models are classified into cross-sectional models (model I∼IH) and dynamic models (model IV∼VI) From the six models. some remarkable results are obtained. The cross-sectional model that incorporate RP choice results of responders with SP cross-sectional model can correct the biases inherent in SP data, and also the dynamic models can consider the temporal variations of the effectiveness of state dependence in SP responses by assuming a simple exponential function of the state dependence. WESML method that use the estimated attrition probability is also adopted to correct the attrition bias in SP Panel data. The results can be contributed to the dynamic modeling of SP Panel data and also useful to predict more exact demand.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.369-374
• /
• 2007

최근 사진측량기술과 IT의 발달로 인해 고품질의 데이터의 획득이 가능하게 되면서 고해상도 영상을 이용한 정사영상의 제작과 활용이 증가하고 있다. 일반적인 정사영상은 DEM을 이용하여 편위수정이 수행하기 때문에 건물, 교량과 같은 비고를 가지고 있는 인공지형지물에 대한 기복변위를 완벽하게 제거하지 못하는 문제점을 안고 있다. 이에 본 연구에서는 건물의 기복변위를 제거한 실감정사영상을 제작하기 위하여 수치사진 측량기법과 LiDAR데이터를 이용한 네가지 실험 CASE별로 DSM을 생성하였고, 각 DSM별 정사영상을 제작하여 정확도 분석을 수행하여, 실감정사영상제작에 적합한 DSM 제작 방안을 제시하였다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2002.04a
• /
• pp.207-217
• /
• 2002

수치정사사진지도를 제작하기 위한 기반 자료로 스캐닝한 수치항공사진영상과 항공사진의 왜곡 보정을 위한 표정, DEM의 추출과 편집 및 편위 수정에 이르기까지 다양한 처리절차가 필요하다. 또한 영상과 벡티 자료의 중첩을 통해 생선한 영상지도의 편집과 지도제작 작업에는 다양한 미적 요소가 필요하다. 본 연구에서는 수치항공사진 영상을 이용하여, 영상에 내포하는 기하학적 변위를 3차원 모델링 결과와 수치표고모델을 이용하여 소거하고, 수치정사사진을 제작한 후에, 1/5,000 수치지도에서 필요한 레이어와 중첩시킨 수치정사사진지도를 제작하여 그 정확도를 분석하였으며, 각 처리 단계별 문제점의 분석과 개선방안을 제시하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.83-96
• /
• 1993

The orthophto map is seen as the form of picture with the uniform reduced scale as the current terrain map. Thus it provides a reasonable feeling of scene and is easy to be interpreted. Furthermore, digital orthophoto is currently used as the basic terrain information data of the Geo-Spatial Information System(GSIS). Therefore, the orhtophoto map has high potential use as a future terrain map. This paper studies the method of producing orthophoto map by using the digital satellite imagery data taken from SPOT satellite of France. The production of orthophoto map requires the process of generating orthophoto imagery with digital elevation model, which process is called digital differential rectification. As the final accuracy of orthophoto map depends on that of digital elevation model, the precise and efficient production method of digital elevation model should be preceded. This study investigated the method of producing digital elevation model directly from SPOT satellite imagery and generated ortho-image by resampling the original SPOT imagery through digital differential rectification. Finally, Simple orthophoto map was made by overlaying the ortho-image and the contour map from digital elevation model.

• Spatial Information Research
• /
• v.12 no.2
• /
• pp.127-135
• /
• 2004

The operational availability of multispectral high-resolution satellite imagery, opens up new possibilities for updating forest map. Compared with information acquired by traditional methods (Panchromatic Aerial Photo), these data of for a number of advantages. In this study used 1m spatial resolution and 4 multispectral band, which are capability to update forest map of kind of tree. From the result of this study, First, the visual analysis of the colour composites of the multispectral data made it possible to distinguish some species(conifer, broad-leaved, un-stocked, arable land). Second, forest map and orthorectiffd satellite imagery are not match in the boundary of forest, therefore work have some troubles in the modification of forest map. Third, the distinguish from age-class, girth-class and density are much need experience and skillful about sample such as aerial photo.

• Journal of Broadcast Engineering
• /
• v.19 no.2
• /
• pp.205-214
• /
• 2014

Minimization of visual fatigue is important for production of high quality stereoscopic 3D contents. Vertical disparity of stereo images occurred during contents production is considered as the main factor of visual fatigue. To ensure correct stereoscopy vertical disparity needs to be eliminated. In this paper, a method for automated image alignment was proposed for Stereoscopic 3D contents generation and post-processing steps. The proposed method consists of two parts: rectification for image alignment and camera motion detection. The proposed method showed that its rectification performance was the most superior among the existing methods tested and that camera motion detection had a success rate of 98.35%. Through these evaluations, we confirmed that the proposed method can be effectively applied to 3D contents production.