• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.6
• /
• pp.529-536
• /
• 2015

A defect could be generated in bolts for a use of oil filters for the manufacturing process and then may affect to the safety and quality in bolts. Also, fine defects may be imbedded in oil filter system. So it is very important that such defects be investigated and screened during the multiple manufacturing processes. Therefore, in order effectively to evaluate the fine defects, the FEM simulations were performed to make characterization in the crack detection of the bolts and the parameters such as number of turns of the coil, the coil size, applied frequency were calculated based on the simulation results. Simulations were carried out for the defect signal of eddy current probe. Exciter and receiver were utilized. In this paper, the FEM simulations were performed in both bobbin-type and pancake-type probe, both probes were optimized under Eddy current FEM simulations and the results of calculation were discussed.

• Journal of Korea Multimedia Society
• /
• v.3 no.6
• /
• pp.611-616
• /
• 2000

By the most important media to deliver the contents on a remote instruction we commonly use audio and documents. A number of remote instruction system are trying to offer the video, but they did not acquire satisfiable results because of the limited network and width. Also, they use the general web browsers that have a lot of unspecific users access the contents. Also, they use the general web browsers that have a lot of unspecific users access the contents. Like this most systems that use the continuous media have not offer the satisfiable contents because of the network limitation. Moreover, because they use the web browser, they offer the contents having documents(web pages) only. In this paper, we propose a web-based remote instruction system on real-time using audio and documents which are the most important media for a information delivery. In addition to the system, we use a action synchronization mechanism between the web browsers. If the instructor uses web pages on his computer and explains the contents of them, the learners see the same web pages as the instructor's and listens to his voice.

• Journal of KIISE:Software and Applications
• /
• v.34 no.1
• /
• pp.52-58
• /
• 2007

In this paper we propose a new robust method to extract accurate human silhouettes indoors with active stereo camera. A prime application is for gesture recognition of mobile robots. The segmentation of distant moving objects includes many problems such as low resolution, shadows, poor stereo matching information and instabilities of the object and background color distributions. There are many object segmentation methods based on color or stereo information but they alone are prone to failure. Here efficient color, stereo and image segmentation methods are fused to infer object and background areas of high confidence. Then the inferred areas are incorporated in graph cut to make human silhouette extraction robust and accurate. Some experimental results are presented with image sequences taken using pan-tilt stereo camera. Our proposed algorithms are evaluated with respect to ground truth data and proved to outperform some methods based on either color/stereo or color/contrast alone.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.19-24
• /
• 2012

In this paper we introduce a commercial interactive whiteboard (IWB) system named ImSensorTouch by ImSensor Inc. Using this interface system, we can control our computer through the interactive whiteboard screen just by touching it with your finger or a pen. The interface interacts with Windows operating system (OS) and is adaptable to changes of surroundings especially temperature, and illumination condition. The proposed system calculates the difference between a reference image and a current image captured by a camera in the optical receptive field. And the position making the difference is used to generate the position on Windows screen. Then, we send a mouse event on the position to Windows OS. We have implemented the system using a critical section(CS) with two threads for the reference frame update process in which an adaptive thresholding technique is periodically exploited to get reliable result. We expect the system is competitive and promises a bright future in the IWB market.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1161-1170
• /
• 2016

In this paper, we provide an authentication technology for verifying dynamic signature made by finger on smart phone. In the proposed method, we are using the Auto-Encoder-based 1 class model in order to effectively distinguish skilled forgery signature. In addition to the basic dynamic signature characteristic information such as appearance and velocity of a signature, we use accelerometer value supported by most of the smartphone. Signed data is re-sampled to give the same length and is normalized to a constant size. We built a test set for evaluation and conducted experiment in three ways. As results of the experiment, the proposed acceleration sensor value and 1 class model shows 6.9% less EER than previous method.

• Journal of Broadcast Engineering
• /
• v.27 no.5
• /
• pp.718-727
• /
• 2022

The Korean domestic cartoon industry has grown explosively by 65% compared to the previous year. Then the market size is expected to exceed KRW 1 trillion. However, excessive work results in health deterioration. Moreover, this working environment makes the production of human resources insufficient, repeating a vicious cycle. Although some tasks require creation activity during cartoon production, there are still a lot of simple repetitive tasks. Therefore, this study aimed to develop a method for creating a character pose through human pose estimation (HPE). The HPE is to detect key points for each joint of a user. The primary role of the proposed method was to make each joint of the character match that of the human. The proposed method enabled us to create the pose of the two-dimensional cartoon character through the results. Furthermore, it was possible to save the static image for one character pose and the video for continuous character pose.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.299-304
• /
• 2021

This study focuses on the preparation of acetaminophen (AP) imprinted functional biomaterials for a transdermal drug delivery using mung bean starch (MBS), polyvinyl alcohol (PVA), sodium benzoate (S) as a crosslinking agent, glycerol (GL) as a plasticizer, and melanin (MEL) as a photothermal agent. The prepared AP imprinted biomaterials were characterized using FE-SEM and their physical properties were evaluated. The photothermal effect and AP release property for functional biomaterials were examined with the irradiation of near infrared (NIR) laser (1.5 W/cm²). When the NIR laser was irradiated on functional biomaterials with/without the addition of MEL, the temperature of MEL added biomaterial increased from 25 ℃ to 41 ℃, whereas the biomaterial without MEL increased from 25 ℃ to 28 ℃. Results indicate that there is the photothermal effect of prepared biomaterial with the addition of MEL. Based on the results, AP release properties were evaluated using standard buffer solutions and artificial skin. It was found that AP release rates of MEL added AP loaded biomaterials were 1.2 times faster than those of MEL non-added AP loaded biomaterials when irradiating with NIR laser. We envision that the developed functional biomaterials can be utilized for an acute pain-killing treatment.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.375-382
• /
• 2002

Handwritten character recognition is classified into on-line handwritten character recognition and off-line handwritten character recognition. On-line handwritten character recognition has made a remarkable outcome compared to off-line hacdwritten character recognition. This method can acquire the dynamic written information such as the writing order and the position of a stroke by means of pen-based electronic input device such as a tablet board. On the contrary, Any dynamic information can not be acquired in off-line handwritten character recognition since there are extreme overlapping between consonants and vowels, and heavily noisy images between strokes, which change the recognition performance with the result of the preprocessing. This paper proposes a method that effectively extracts the stroke including dynamic information of characters for off-line Korean handwritten character recognition. First of all, this method makes improvement and binarization of input handwritten character image as preprocessing procedure using watershed algorithm. The next procedure is extraction of skeleton by using the transformed Lu and Wang's thinning: algorithm, and segment pixel array is extracted by abstracting the feature point of the characters. Then, the vectorization is executed with a maximum permission error method. In the case that a few strokes are bound in a segment, a segment pixel array is divided with two or more segment vectors. In order to reconstruct the extracted segment vector with a complete stroke, the directional component of the vector is mortified by using right-hand writing coordinate system. With combination of segment vectors which are adjacent and can be combined, the reconstruction of complete stroke is made out which is suitable for character recognition. As experimentation, it is verified that the proposed method is suitable for handwritten Korean character recognition.

• Journal of the International Relations & Interdisciplinary Education
• /
• v.2 no.2
• /
• pp.81-95
• /
• 2022

The core of this study is to develop an edutech utilization program to be applied to 5th grade students by utilizing school curriculum time, and the conclusions based on the results of the study are as follows. First, for the development of future educational programs using edutech, a content preference survey was conducted and significant responses were confirmed from 27 teachers and 216 students, excluding missing values. In the future education implementation, UCC (video shooting, editing, etc.) and work activities (3D pen, 3D printer, etc.) were selected based on the need for separate edtech devices. Second, in order to develop a future education program using edutech, the future education class module was set in 4 stages based on previous research. First of all, in Make a foundation, theories by subject are developed, and in Open an activity, future education experience activities using key edutech are developed. In Organize evaluation, individual self-evaluation was conducted, and based on this, customized in-depth supplementary activities were conducted in Act individually. Third, in order for future education programs using edutech to be organized in the regular curriculum, sufficient connectivity with the curriculum must be secured. The basis for systematic and stable research was prepared by analyzing the curriculum of the 5th grade subject of the study and securing hours in connection with creative experiential activities. The data developed through this process were modified and supplemented based on the content validity test. The fact that the program application and verification steps were not performed is a limitation of this study, but it is expected that this program will expand the possibility of future education practice in the school field.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.10-24
• /
• 2021

Purpose: The purpose of this study is to determine the dangers of biodiesel and general diesel mixtures currently used as alternative fuels by equipment (tag method and penski Marten method) and to determine the difference between flash point and combustion point (closed, open) according to test methods. It is intended to be used as a reference material for identification and evaluation of firecausing substances by confirming the risk of mixtures by comparative analysis and measurement, and establishing a risk assessment method for chemical substances. Method: Flash point test method and result treatment were tested based on ASTM and KS M mode, which are tag sealing and pen schematense test methods used as flash point and combustion point test methods for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was a test equipment that satisfies the test standards of KS M 2010 with equipment produced by TANAKA of Japan. The flash point and combustion point were measured, and the flash point according to the test method of biodiesel and general diesel mixture ( Closed, open), and the ignition point of a mixture of biodiesel and general diesel was compared and analyzed for ignition risk compared with conventional diesel. Results: Looking at the experimental results, first, as an analysis of the risk of flammability of the mixture, the flash point of a substance containing 70% biodiesel was found to be about 92℃ based on general diesel with a flash point of 64.5℃, and gasoline and biodiesel or When the biodiesel mixture was synthesized, it was confirmed that the flash point tends to decrease. In addition, the difference between the flash point and the combustion point was analyzed as about 20 ~ 30℃, and when a small amount of gasoline or methanol was mixed, the flash point was lowered, but it was confirmed that the combustion point was similar to that of the existing mixture. Conclusion: In this study, in order to secure the effectiveness of the details of the criteria for judging dangerous materials in the existing Dangerous Materials Safety Management Act, and to secure the reliability and reproducibility of the judgment of dangerous materials, we confirm the criteria for judging the risk of the mixture through an experimental study on flammable mixtures. It will be able to provide reference data for experimental criteria for flammable liquids that are regulated in the field. In addition, if this study accumulates know-how on experiment by test method, it is expected that it can be used as a basis for research on risk assessment and research on dangerous goods.