• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.302-304
• /
• 2001

본 논문에서는 다 채널 위상 측정 장치를 전용하드웨어로 구현하기 위한 설계 구조에 대하여 제시하였으며, 연산량이 많은 곱셈기를 시분할에 의해 공유하는 구조를 제시하였다. 또한 페이저 측정을 위한 Sliding-DFT 알고리즘을 순환 구현할 경우의 근사 구현 오차에 관한 정량적인 연구를 수행하였다. 이러한 오차 영향의 해석을 기반으로 하여 곱셈기 공유 구조를 적용한 위상 측정 장치를 설계하고, 설계한 하드웨어의 내부동작을 보여주는 시뮬레이션을 통해 설계의 정확성을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.2015-2017
• /
• 1998

This paper deals with the design of a field oriented control system model for the high performance induction motor using Matlab with Simulink. The proposed control system model, which is not used the speed and flux sensor, contains IM model, Tranformation, Decoupling, FFOC(Field Flux Orientation Controller), Torque calculator and PI Controller to control speed, torque. Results present the stator and rotor flux phasor trajectory, the startup and transient response of speed, torque and stator current with field oriented control and the response to changes in reference speed with no load. This paper shows that the propose control system is more robust than other vector control system, and suggest the enchanced model, using Matlab with Simulink for the high performance in induction motor control.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.195-197
• /
• 2000

J2ME(Java 2 Micro Edition)는 소비자/임베디드 디바이스 시장을 목표로 한 자바2 플랫폼으로서 이는 컨피규레이션(Configuration)과 프로파일(Profile)로 구성된다. SLDC/ MIDP(Connected Limited Device Configuration/Mobile Information Device Profile)는 그 중에서도 휴대폰과 양방향 페이저 같은 제한된 메모리를 가진 장치 위에서 사용되는 플랫폼이다. 본 논문에서는 J2ME 기반 하에서 CLDC/MIDP를 이용하여 보안모듈을 작성하고 휴대폰에서도 안전한 전자서명 및 전자지불을 가능케 하여 Mobile Commerce의 기초를 이루었다. 여기서 서명은 XML 기반으로 구성되었고, 시스템은 MIDlet으로 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.193-195
• /
• 2003

This paper presents an approach to estimate the power transmission line parameter by phasor measurement units(PMUs), which are synchronized to 1 pps signal of GPS. Existing approaches to estimate power transmission line parameter, are mainly off-line ones, based on faults or switching events on other neighboring lines. In this paper, to obtain static and dynamic properties of power transmission line parameter in service, the prototype of pmu-based Transmission Line Parameter Monitoring System (TLPMS) is proposed. Also, an technique to estimate parameters of transmission line described as 2-port network model and the soundness of estimated parameters are addressed.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.111-112
• /
• 2006

실리콘을 기반으로 한 micro-Total Analysis Systems(${\mu}$-TAS)이 출현한 이후에, 현재까지 다양한 고분자 화합물을 이용한 유체소자의 연구가 진행중이다. 고분자 화합물은 실리콘과 유리를 이용한 전통적인 유체소자 재료에 비해 재료의 경제성과 소자 제작의 용이성 그리고 처리하고자 하는 유체에 맞는 다양한 재료를 선택할 수 있다는 장점을 지니고 있다. 하지만 고분자 화합물의 표면 에너지가 실리콘과 유리에 비해 낮은 단점을 가지고 있다. 이러한 문제를 극복하기 위해 다양한 표면처리 연구가 이루어져왔다. 레이저를 이용한 표면처리는 실험장치가 간단하고 대기 중에서 실시할 수 있다는 장점을 가지고 있다. 본 연구에서는 Nd:YAG 레이저(${\lambda}$=266 nm, pulse)를 이용하여 유체소자 재료로써 많이 사용되는 polymethly methacrylate(PMMA)의 표면개질을 시도하였다. 표면처리 후 접촉각 측정기를 이용하여 표면개질 정도를 확인한 결과, 표면 산소 함유량이 증가됨에 따라 접촉각이 감소하였다. 결론적으로 PMMA의 본래 성질은 유지한 채 레이저 표면처리를 이용한 표면 에너지 증가 효과를 볼 수 있었다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.391-392
• /
• 2012

본 논문에서는 페이저 변환을 통한 주파수-시비율-가변형 이중 출력 LLC 공진형 컨버터의 포락선 모델을 제시한다. 이를 이용하면 제안 회로의 대신호 및 소신호 특성을 쉽게 파악할 수 있을 뿐 아니라, 전달 함수의 정확한 수학적 해석을 통해 보상기의 설계가 용이해지는 장점이 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.4
• /
• pp.342-350
• /
• 2020

Acoustic and vibration research activities for the structural development of Korean space launch vehicles are introduced in this paper. Various dynamic loads exerted on a launch vehicle during its operation are summarized. The acoustical design method of payload fairings which protect satellites from harsh launch environment was reviewed. Several acoustic research activities were performed to enhance the analytical prediction ability during the development period of the Naro and the Nuri launcher. Specifically, the following research activities are reviewed: a test and vibro-acoustic analysis of composite cylinders whose layup properties are varied, a research on low-frequency acoustic load reduction by an acoustic resonator array and an acoustic test on the cylinder part of the Naro payload fairing. A vibro-acoustic analysis result for the Nuri launcher was introduced and predicted acoustic and vibration levels and measured ones are shown to be in a good agreement.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.429-435
• /
• 2020

In this study, physical properties and EMP shielding performance evaluation of cement paste according to the amount of milled carbon fiber was conducted to develop EMP shielding cement using carbon fiber. The length of the milled carbon fiber used was 100㎛, and it was used as a cement admixture because it showed a powdery form to the naked eye. As a result of the experiment, when 5% of the amount of cement was used, the milled carbon fiber was effective in compressive strength and EMP shielding, and the shielding effect did not increase when used beyond that. As a result of examining the EMP shielding performance according to the thickness of the specimen, the plain without milled carbon fiber had no effect of increasing the shielding rate according to the thickness. The shielding performance of the specimens using the milled carbon fiber increased as the thickness increased. Therefore, in order to increase the EMP shielding rate when comparing and evaluating the performance according to the amount of milled carbon fiber used and the thickness of the specimen, 5% of the milled carbon fiber used is optimal. In addition, the method of increasing the thickness is considered to be effective.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.10
• /
• pp.82-92
• /
• 2005

The present study was carried out in order to develop a remote-controlled micro ornithopter with a weight of 20 gram. This ornithopter has three channel radio control. It runs on two direct-current type pager motors powered by a lithium polymer battery which flaps its 35cm wings. The performance of an ornithopter, applied to a flapping motion only, was validated by flight tests. The flight test results indicate that the ornithopter developed here has sufficient thrust to propel itself.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.55-61
• /
• 2009

This paper presents a modified Phasor Discrete Particle Swarm Optimization (PDPSO) algorithm to configure Community Energy Systems(CESs) in the distribution system. The CES obtains electric power from its own Distributed Generations(DGs) and purchases insufficient power from the competitive power market, to supply power for customers contracted with the CES. When there are two or more CESs in a network, the CESs will continue the competitive expansion to reduce the total operation cost. The particles of the proposed PDPSO algorithm have magnitude and phase angle values, and move within a circle area. In the case study, the results by PDPSO algorithm was compared with that by the conventional DPSO algorithm.