• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.171-173
• /
• 2016

일반적으로 대형 버스 및 트럭 등 같은 경우, 부하가 아주 크다. 또한 내리막길이나 장거리 운행 시에 잦은 제동으로 인하여 마찰을 이용한 기존 방식의 브레이크들은 브레이크 파열 및 페이드 현상 때문에 제동 안전성에 문제가 있다. 이러한 제동 부담을 분담하기 위해 현재 보조브레이크(리타더)가 필수적이며, 엔진 계통의 보조브레이크가 아닌 비접촉식 브레이크 같은 친환경 보조브레이크가 요구되고 있다. 그리고 차량 제동시 발생하는 기계에너지를 전기에너지로 회생하여 에너지효율을 향상시키려는 연구가 현재 활발히 진행되고 있다. 본 논문에서는 와전류를 이용한 전자기형 리타더에서 발생되는 전기에너지를 회수하기 위한 전압 제어 방법을 다룰 것이다. 리타더의 제동에너지를 전기에너지로 회생하기 위해 L-C 공진회로로 구성하였다. 리타더를 자여자 유도발전기(Self-Excited Induction Generator)로 모델링 하였고 이를 토대로 시뮬레이션 및 실험을 진행하였다. 자여자 유도발전기의 구동 조건에 대해서 언급하고 이를 파라미터에 따라 3-D map으로 만들었다. 또 회로 중의 FET 게이트에 전압을 인가하는 제어장치의 구동펄스에 따라 바뀌는 공진회로의 전압을 분석하였으며, 이 전압을 제어하기 위하여 PI 제어기를 이용한 알고리즘을 제안하였다. 이 전압을 3상 AC/DC컨버터를 통과한 후 DC/DC컨버터를 통하여 차량 내부의 배터리에 충전되는데 제어를 위해 3상 AC/DC에서의 전압 리플을 MA(Moving Average) 방식의 필터를 사용하여 DC/DC컨버터의 입력에 맞도록 제어하였다. 이와 같이 전자기형 리타더에서 유도되는 전압을 제어기의 제어 펄스에 따라 제어할 수 있으며 Matlab Simulink를 이용하여 리타더의 모델과 그 제어기의 타당성을 보였다. 또 실제 M-G Set 실험을 통하여 그 연관성을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.122.2-122.2
• /
• 2015

n-type 실리콘은 p-type과 비교하여 더 높은 소수캐리어 lifetime 으로 금속 불순물에 대하여 더 좋은 내성을 갖는다. 고효율 실리콘 태양전지를 위하여 p-type 웨이퍼를 n-type으로 교체하여 빛을 조사했을 때, 광전자들이 형성되어 p-type과 비교하여 더 좋은 lifetime 안정성을 갖는다. n-type 태양전지의 전면 전극은 AgAl paste로 형성하였다. AgAl 페이스트는 소성 온도와 밀접하게 관련되어 전극의 접합 깊이에 영향을 미친다. p+ emitter 층에 파고드는 금속 접촉의 최적화된 깊이는 접촉 저항에 영향을 미치는 중요한 요소이다. 본 연구에서는 소성 조건을 변화시킴으로써, 금속 깊이의 효과적인 형성을 위한 소성 조건을 최적화하였다. $670^{\circ}C$ 이하의 온도에서 소성을 진행 하였을 때, 충분한 접촉 깊이를 형성하지 못하여 높은 접촉저항을 갖는다. 소성 온도가 증가함에 따라, 접촉 저항은 감소하였다. 최적 소성 온도 $865^{\circ}C$에서 측정된 접촉저항은 $5.99mWcm^2$이다. $900^{\circ}C$ 이상에서 contact junction은 emitter를 통과하여 실리콘과 결합하였다. 그 결과로 접촉저항 shunt가 발생한다.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.847-852
• /
• 2019

In this study, the effect of additives on the performance of aqueous organic redox flow battery (AORFB) using quinoxaline and ferrocyanide as active materials in alkaline supporting electrolyte is investigated. Quinoxaline shows the lowest redox potential (-0.97 V) in KOH supporting electrolyte, while when quinoxaline and ferrocyanide are used as the target active materials, the cell voltage of this redox combination is 1.3 V. When the single cell tests of AORFBs using 0.1 M active materials in 1 M KCl supporting electrolyte and Nafion 117 membrane are implemented, it does not work properly because of the side reaction of quinoxaline. To reduce or prevent the side reaction of quinoxaline, the two types of additives are considered. They are the potassium sulfate as electrophile additive and potassium iodide as nucleophilie additive. Of them, when the single cell tests of AORFBs using potassium iodide as additive dissolved in quinoxaline solution are performed, the capacity loss rate is reduced to $0.21Ah{\cdot}L^{-1}per\;cycle$ and it is better than that of the single cell test of AORFB operated without additive ($0.29Ah{\cdot}L^{-1}per\;cycle$).

• Journal of KIISE:Software and Applications
• /
• v.31 no.3
• /
• pp.379-386
• /
• 2004

Video segmentation is a fundamental task in video indexing and it includes two kinds of shot change detections such as the abrupt transition and the gradual transition. The abrupt shot boundaries are detected by computing the image-based distance between adjacent frames and comparing this distance with a pre-determined threshold value. However, the gradual shot boundaries are difficult to detect with this approach. To overcome this difficulty, we propose the method that detects gradual transition in the MPEG compressed video using the HMM (Hidden Markov Model). We take two different HMMs such as a discrete HMM and a continuous HMM with a Gaussian mixture model. As image features for HMM's observations, we use two distinct features such as the difference of histogram of DC images between two adjacent frames and the difference of each individual macroblock's deviations at the corresponding macroblock's between two adjacent frames, where deviation means an arithmetic difference of each macroblock's DC value from the mean of DC values in the given frame. Furthermore, we obtain the DC sequences of P and B frame by the first order approximation for a fast and effective computation. Experiment results show that we obtain the best detection and classification performance of gradual transitions when a continuous HMM with one Gaussian model is taken and two image features are used together.

• Journal of Korea Multimedia Society
• /
• v.14 no.10
• /
• pp.1252-1261
• /
• 2011

In this paper, we propose the comparison method of pattern similarity for video segmentation algorithm. The shot boundary type is categorized as 2 types, abrupt change and gradual change. The representative examples of gradual change are dissolve, fade-in, fade-out or wipe transition. The proposed method consider the problem to detect shot boundary as 2-class problem. We concentrated if the shot boundary event happens or not. It is essential to define similarity between frames for shot boundary detection. We proposed 2 similarity measures, within similarity and between similarity. The within similarity is defined by feature comparison between frames belong to same shot. The between similarity is defined by feature comparison between frames belong to different scene. Finally we calculated the statistical patterns comparison between the within similarity and between similarity. Because this measure is robust to flash light or object movement, our proposed algorithm make contribution towards reducing false positive rate. We employed color histogram and mean of sub-block on frame image as frame feature. We performed the experimental evaluation with video dataset including set of TREC-2001 and TREC-2002. The proposed algorithm shows the performance, 91.84% recall and 86.43% precision in experimental circumstance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1138-1146
• /
• 2005

This paper makes a study of a formulation of net filter discrimination(NFD) and its computation for analyzing adjacent channel interference and suggests a systematic algorithm for calculating protection ratios of co-channel and adjacent channel applicable to frequency coordination in the fixed radio relay networks. It is shown that adjacent channel protection ratio can be derived from two factors: One is NFD depending upon receiver filter characteristic as well as transmitter spectrum mask and the other is co-channel protection ratio given by a function of fade margin, modulation scheme, and allowable interference. Actually to show the computing procedure from transmitter spectrum mask and receiver filter characteristic, NFD has been obtained for channel bandwidth of 29.65 and 40 MHz at 6.2 and 6.7 GHz band, respectively. According to the results, NFDs at the first adjacent channel of 29.65 and 40 MHz provide 27.4 and 28.9 dB, respectively. From these data, adjacent channel protection ratios corresponding to each channel bandwidth yield 47.5 and 46.3 dB for a given 64-QAM and 60 km. The proposed method gives some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter radio relay networks.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.6
• /
• pp.583-591
• /
• 2000

Caching mechanisms have been studied extensively to buffer the speed gap of hierarchical storages in the context of cache memory, paging system, and buffer management system. As the wide-area distributed environments such as the WWW extend broadly, caching of remote objects becomes more and more important. In the wide-area distributed environments, the cost and the benefit of caching an object is not uniform due to the location of the object; which should be considered in the cache replacement algorithms. For online operation, the time complexity of the replacement algorithm should not be excessive. To date, most replacement algorithms for the wide-area distributed environments do not meet both the non-uniformity of objects and the time complexity constraint. This paper proposes a replacement algorithm which considers the non-uniformity of objects properly; it also allows for an efficient implementation. Trace-driven simulations show that proposed algorithm outperforms existing replacement algorithms.

• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.115-121
• /
• 2021

Ethyl glucuronide (EtG) and ethyl sulfate (EtS), which are ethanol metabolites, are direct indicators of ethanol intake; they have been studied in a variety of biological samples in forensic science. It is necessary to analyze ethanol metabolites to determine whether the ethanol detected in autopsy cases was due to alcohol consumption before death or due to the ethanol produced from post-mortem decay. In general, EtG and EtS are detected in the blood together with ethanol; however, it may be difficult to secure blood depending on the extent of decay. Therefore, the aforementioned method should be replaced by detecting the ethanol metabolites using tissue biological samples. In this study, we determined the optimal experimental conditions for detecting EtG and EtS from spleen samples using Liquid Chromatography - Tandem Mass Spectrometry (LC-MS/MS). Herein, the test method was validated, and an analysis method was applied to the actual autopsy cases.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.115-121
• /
• 2022

In surface mount technology (SMT), the screen printer, which is an equipment for applying solder cream, has a lot of poor coating as the pad becomes smaller. To solve this problem, a jet printer is being used recently. However, if the nozzle at the end of the valve applied to the jet printer head is not cleaned, solder cream remains or an error occurs. To prevent this, the nozzles should be cleaned periodically. In this paper, a more stable cleaning method than the existing technology is presented for the stable application of solder cream on a jet printer. In this method, cut a 35mm wide mujin cloth, wrap it in a roll, and rotate it with a DC geared motor on the other side to clean it. As a result, it was confirmed that the solder paste was not left on the nozzle surface and was well wiped when cleaning with about 2,000 dotting cycles.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1687-1698
• /
• 2021

This study is to produce multiple layers of liposomes in a supercritical state and encapsulates active ingredients in order to stably encapsulate thermodynamically unstable active ingredients. In order to form a liposome in a supercritical state, a mixed surfactant development including vegetable-derived hydrogenated phosphatidyl choline and their delivative, hydrogenated sucrose distearate was synthesized as high purity. It describes a manufacturing method of injecting liquid carbon dioxide into a reactor to create a supercritical state and stirring to produce a giant liposome, and adding and loading genistein and quercetin. The HLB of the mixed lipid complex (SC-Lipid Complex) was 12.50, and multiple layers of liposome vesicles were formed even at very low concentrations. This surfactant had a specific odor with a pale yellow flake, the specific gravity was 0.972, and the acid value was 0.12, indicating that it was synthesized with high purity. As a result of the emulsifying capacity experiment using 20 wt% capric/capric triglyceride and triethylhexanoin using SC-Lipid Complex, it was found to have 96.2% emulsifying power. SC LIPOSOME GENISTEIN was confirmed that a multi-layer liposome vesicle was formed through a transmission electron microscope (Cryo-TEM) for the supercritical liposome encapsulated with genistein. The primary liposome particle size in which genistein was encapsulated was 253.9 nm, and the secondary capsule size was 18.2 ㎛. Using genistein as the standard substance, the encapsulation efficiency of supercritical liposomes was 99.5%, and general liposomes were found to have an efficiency of 93.6%. In addition, the antioxidant activity experiment in which quercetin was sealed was confirmed by the DPPH method, and it was found that the supercritical liposome significantly maintained excellent antioxidant activity. In this study, thermodynamically unstable raw materials were sealed into liposomes without organic solvents in a supercritical state. Based on these results, it is expected that it can be applied to various forms such as highly functional skincare cosmetics, makeup cosmetics, and scalp protection cosmetics.