• Journal of the Korea Computer Graphics Society
• /
• v.8 no.4
• /
• pp.1-7
• /
• 2002

This paper presents a new approach for modeling human limbs shape from 3D scan data. Based on the cylindrical structure of limbs, the overall shape is approximated with a set of ellipsoids through ellipsoid fitting and interpolation of fit-ellipsoids. Then, the smooth domain surface representing the coarse shape is generated as the envelope surface of ellipsoidal sweep, and the fine details are reconstructed by constructing parametric displacement function on the domain surface. For fast calculation, the envelope surface is approximated with ellipse sweep surface, and points on the reconstructed surface are mapped onto the corresponding ellipsoid. We demonstrate the effectiveness of our approach for skeleton-driven body deformation.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.500-505
• /
• 2007

Current humanoid robot technology has a problem of lacking opened methodology about mechanisms of analysis, design, implementation, and integration for robot development but is focused only on manufacture robot and implementation of technology. In this paper, to overcome problems of humanoid robots that have been shown since and for construction of new structure which satisfy the concept of opening, networking, and modularization that is the development direction of future robot, we proposed morphological and neurological model of human arm and design method of humanoid robot arm based on the each joint design and kinematics model.

• Journal of Biomedical Engineering Research
• /
• v.11 no.1
• /
• pp.1-4
• /
• 1990

An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.4 s.304
• /
• pp.11-18
• /
• 2005

For expressing intention the human often use body languages as well as vocal languages. Of course the gestures using arms and hands are the representative ones among the body languages. Therefore it is very important to understand the human arm motion in human-computer interaction. In this respect we present here how to estimate 3D pose of human arms by using computer vision systems. For this we first focus on the idea that the human arm motion consists of mostly revolute joint motions, and then we present an algorithm for understanding 3D motion of a revolute joint using vision systems. Next we apply it to estimating 3D pose of human arms using vision systems. The fundamental idea for this algorithm extension is that we may apply the algorithm for a revolute joint to each of the revolute joints of hmm arms one after another. In designing the algorithms we focus on seeking closed-form solutions with high accuracy because we aim at applying them to human computer interaction for ubiquitous computing and virtual reality.

• Journal of Naturopathy
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2019

Purpose: The purpose of this study was to investigate whether Qihyul-therapy was effective against subjects of bad Qihyul circulation who had narrowed muscles of the buttocks, a distorted body shape, or pain. Methods: Qihyul-therapy used. Results: The muscles of the buttocks remained almost untouched. The elasticity of the muscles restored. The skin tone brightened, and the anal muscle strengthened after Qihyul-therapy. The subject's body was shifted to the right by -7°. The right arm was about 6 cm longer than the left arm. But after correction, the right arm was about 5 cm shorter. The distorted body was almost balanced. After neck and shoulder correction, the distance between the collarbone and neck was 7~10 cm wider. After the pelvic correction, the pain in the buttocks was relieved, and the position of the hip joint returned correctly. The right leg that was turned 45° to the left was corrected, and the length became the same. Subjects had no knees attached, their right knees were up 5 cm above the left, and their ankles bent at an angle of 30 ° relative to the left, but after correction, the knees of the two legs stably attached. The height of the knee became the normal angle. Conclusion: If the Qihyul-therapy, the spine correction Qihyul-exercise and the pelvic correction Qihyul-exercise performed steadily, the deformed body shape restored adequately, and it is useful to prevent and cure related diseases by alleviating the pains.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2002.05a
• /
• pp.240-243
• /
• 2002

본 연구에서는 인간공학적 평가를 위한 한국인 인체모델을 개발하고, 인체 모델의 평가를 위해 팔 동작의 시뮬레이션 및 리치 평가를 수행하였다. 한국인의 인체측정자료를 이용하여 통계학적 분석을 실시하고, 인체 자료생성 프로그램을 통해 인체 각 지체들의 특성치와 상관관계를 얻었다. 이를 바탕으로 인체 모델을 구성하고 가상 공간에서의 용이한 적용을 위해 인체 모델은 3차원 그래픽 기술을 통해 가시화되었다. 차량모델과 인체모델을 통합하고 차량 내에서 운전자의 팔 동작 표현 및 리치 평가기능을 구현하였다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1409-1410
• /
• 2015

현대기술의 발달로 인해 인간의 삶 중 많은 부분을 기계가 차지하고 있다. 특히 로봇공학 분야는 위험하거나 혹은 매우 정밀함을 요하는 일, 단순반복 등 인간이 기피하거나 하기 어려운 일을 대신 해줌으로서 많은 관심을 받고 있다. 이에 우리는 우리 생활에 가장 깊숙히 들어와 있는 로봇팔분야에 대해 말하고자 한다. 현재 로봇팔은 산업용은 물론, 의료용, 재해용 등 다양한 분야에서 사용되고 있다. 하지만 매우 정밀하고 정확한 작업을 위해 만들어져 있음에도 불구하고, 약간의 충격에도 이상이 생긴다거나, 기기의 이음세 부분의 잦은 회전으로 마모가 발생하게 되고 그에 따라 미세한 오차가 발생한다. 그런 상황을 방지하고자, 우리는 PSD(Position Sensitive Detecter)센서를 이용해 실시간으로 굽힘각을 측정 및 감시하여 보다 정확한 구동을 유도하려 한다. 이는 단순한 로봇팔만이 아닌 휴머노이드나 다른 회전을 이용하는 기기라면 어디든 쉽게 적용 할 수 있을 것이다.

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.370-378
• /
• 2020

This study aims to identify the types and characteristics of followership perceived by hotel employees as emotional workers in terms of the diagnosis of their fellowship awareness toward their managers and the detailed patterns of subjective followership. The Q methodology is applied to find out the types of followership of hotel employees, the similarities and differences between each type, and the meanings of each type. A total of 40 questions are selected for the Q sample. The analysis shows that there are four types such as 'organizational oriented', 'individual oriented', 'adaptive oriented' and 'critical passive oriented'. It also shows that each type has a unique characteristic, and identifies the items in the all four types that they share or do not. This study is expected to present a new perspective on hotel management by identifying the characteristics of the followership from the perspective of the hotel staff who are supposed to do some emotional labor caused by the emotional dissonance hotel staff suffer.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1205-1212
• /
• 2021

Robots that can actually help people a lot by dealing with dangerous tasks that are difficult for people to do, such as disaster situations, lifesaving, handling dangerous goods, and reconnaissance of dangerous areas, continue to become an issue. Therefore, in this paper, we intend to implement a mobile robot arm that can implement a human motion will on the robot arm to enable active response according to the situation and control the vehicle according to hand movements to give mobility. A controller is manufactured using a flex sensor and agyro sensor, and the roll and pitch values of the two gyro sensors are adjusted to control the angle of the robot arm and specify the vehicle direction. In addition, by designating the levels of the three flex sensors, the motor is operated according to hand movements, and a robot arm is implemented so that objects can be picked up and moved.

• The Journal of Korean Society for Radiation Therapy
• /
• v.14 no.1
• /
• pp.85-88
• /
• 2002

I. 목적 : arm-up holder는 흉부 및 복부 질환 치료의 환자고정에 유용하게 사용하고 있으나 손잡이 부분과 어깨가 닿는 부분까지 거리 때문에 동일한 자세를 유지하는데 불편함이 있다. 특히 긴장을 많이 하거나 기력이 없는 환자는 방사선 치료 시 자세의 불안정으로 인하여 치료의 정확성이 떨어질 수 있다. 이에 본원에서는 현재 사용하고 있는 arm-up holder에 팔의 지지를 위한 보조기구를 제작하여 유용성을 평가하였다. II. 대상 및 방법 : 기존의 arm-up holder에 어깨받침대를 부착하여 개선된 arm-up holder를 제작하였다. 실험을 위하여 기존의 arm-up holder를 사용하는 환자그룹과 개선된 arm-up holder를 사용하는 그룹으로 구분하여 자세 변화를 평가하였다. 두 그룹의 환자를 대상으로 모의 치료를 실시한 후 치료실에서 L-gram 을 2회 씩 촬영하여 치료하고자 하는 portal film과 isocenter의 변화를 측정했다. 각 그룹 당 10명씩의 환자를 선정하여 반복 조사하였다. III. 결과 : 개선된 arm-up holder를 사용한 그룹의 isocenter 의 변화는 최대 2mm, 최소 0.5mm 평균 1.2mm 이다. 기존의 arm-up folder를 사용한 그룹과 비교하여 평균변화는 약 2배로 나라났고, 최대 변화는 2.5배의 오차범위가 측정되었다. IV. 결론 : 현재 사용하고 있는 arm-up holder는 흉부 및 복부의 사방향 방사선 치료 시 팔에 의한 방사선 감약을 예방할 수 있는 유용한 고정용구이다. 하지만 팔을 올리고 있는 자세는 환자에게 불편함을 야기 시키며 이로 인한 치료의 정확성을 감소시킬 수 있다. 따라서, 기존의 arm-up holder에 보조기구를 제작하여 사용함으로써 환자의 불편함을 개선하고, set-up 의 안정성과 재현성을 향상시킬 수 있었다.