• Computational Structural Engineering
• /
• v.2 no.3
• /
• pp.97-103
• /
• 1989

In this study, a usefulness of the iterative solution procedures is reviewed for the elasto-plastic large deflection analysis of imperfect plates by finite element method. Three typical solution techniques such as simple incremental(SI) method, Newton-Raphson(NR) method and modified Newton-Raphson (mNR) method are compared. It is concluded that for thin plates which are given rise to the large deflection, iteration for the convergence of the unbalance force should be performed and in this case mNR method is more useful than NR method since the computing time of the former becomes to be a half of the latter, in which the accuracy of the result remains same. For thick plates or thin plates with large initial deflection, however, the use of SI method is quite better since the unbalance force may be negligible.

• Journal of the Korean Institute of Navigation
• /
• v.25 no.1
• /
• pp.45-52
• /
• 2001

The purpose of this study is the optimum modification of dynamic characteristics of stiffened plate structure. In the method of the optimization, finite element method(FEM), sensitivity analysis and optimum structural modification method are used. To begin with, using FEM, the dynamic characteristics of stiffened plate structure is analyzed. Next, rate of change of dynamic characteristics by the change of design variable is calculated using the sensitivity analysis. Then, amount of change of design variable is calculated using this sensitivity value and optimum structural modification method. The change of natural frequency is made to be an objective function. Thickness of plate and cross section moment become a design variable. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate structure.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.155-168
• /
• 1998

보강된 판 및 쉘구조의 안정성 및 후좌굴을 포함하는 기하학적 비선형 해석을 수행하기 위하여, total Lagrangian formulation에 근거한 연속체의 증분평형방정식으로부터 변형된 쉘요소인 유한요소이론을 제시하였다. 쉘구조의 곡률이 불연속적으로 변하거나 쉘부재들이 유한한 각도로 만나는 보강된 판 및 쉘구조의 비선형 해석이 가능하도록 주부재와 보강재 간의 연결점에 대한 일반적인 변환관계를 제시하였으며 좌굴해석 및 기하학적 비선형해석의 경우에 해의 정확성 및 수렴성을 개선시키기 위하여 접선강도행렬 산정시 회전각의 2차항을 포함시켰다. 또한, shear locking 현상을 극복하기 위하여 감차적분을 적용하였고 쉘구조의 좌굴해석에서는 power method를 적용하여 해석의 효율을 높였으며, 후좌굴해석에서는 변위 및 하중증분법을 적절히 결합시켜 보강된 쉘구조의 후좌굴 거동추적이 용이하였다. 또한, 입력자료를 손쉽게 준비하고 좌굴모드 및 후좌굴거동을 효율적으로 분석하기 위하여 전, 후 처리 프로그램을 개발하였고 다양한 해석예제를 통하여 다른 문헌의 해석결과를 비교함으로써 본 연구에서 개발된 유한요소 해석프로그램의 타당성 및 정확성을 입증하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.2
• /
• pp.151-158
• /
• 2005

This research analyzes eigenvalue analysis of stiffened plates on the Pasternak foundations using the finite clement method. For analyzing the stiffened plates, both the Mindlin plate theory and Timoshenko beam-column theory were applied. In application of the finite element method, 8-nodes serendipity clement system and 3-nodes finite element system were used for plate and beam elements, respectively. Elastic foundations were modeled as the Pasternak foundations in which the continuity effect of foundations is considered. In order to verify the theory of this study, solutions obtained by this analysis were compared with the classical solutions in reference, experimental solutions and solutions obtained by SAP 2000. The natural frequency of stiffened plates on Pasternak foundations were determined according to changes or foundation parameters and dimensions of stiffener.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.4
• /
• pp.727-739
• /
• 2002

Based on a generalized variational principle for magneto-thermo-elasticity, a theoretical model is proposed to describe the coupled magneto-thermo-elastic interaction in soft ferromagnetic plates. Using the linearized theory of magneto-elasticity and perturbation technique, we analyze the magneto-elastic and magneto-thermo-elastic instability of simply supported ferromagnetic plates subjected to thermal and magnetic fields. A nonlinear finite element procedure is developed next to simulate the magneto-thermo-elastic behavior of a finite-size ferromagnetic plates. The effects of thermal and magnetic fields on the magneto-thermo-elastic bending and buckling is investigated in some detail.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.1-10
• /
• 1988

A higher order plate bending finite element using cubic in-plane displacement profiles is proposed for geometrically nonlinear analysis of thin and thick plates. The higher order plate bending element has been derived from the three dimensional plate-like continuum by discretization of the equations of motion by Galerkin weighted residual method, together with enforcing higher order plate assumptions. Total Lagrangian formulation has been used for geometrically nonlinear analysis of plates and consistent linearization by Newton-Raphson method has been performed to solve the nonlinear equations. The element characteristics have been computed by, selective reduced integration technique using Gauss quadrature to avoid shear locking phenomenon in case of extremely thin plates. Several numerical examples were solved with FEAP macro program to demonstrate versatility and accuracy of the present higher order plate bending element.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.1-8
• /
• 1992

A method analizing contact pressure between plate and elastic half space is presented by using F.E.M. With the method, the pressure intensities at surface nodes of half space cae be directly calculated by using flexibility matrix of half space. The method is originally presented by Y.K. Cheung et al.(3) Insted of Y.K. Cheung's method, which use a conception of equi-contact pressure area around each surface nodes of half space in the noded rectanqular element area. We use the equi-contact pressure area around the Gaussian integration points of half space surface in the noded isoparametric element area. Numarical examples are presented and compared with other's studies.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.4 s.37
• /
• pp.667-676
• /
• 1998

The transient analysis of partially supported laminated plates with rectangular holes under uniformly distributed transverse load is studied using finite element method. The first-order shear deformation theory and the variational energy method are employed in mathematical formulation. The effects on central deflection by plate thickness ratio, material modulus ratio, ply lamination geometry and boundary conditions are investigated Numerical results are presented and comparisons of the results by the present method with those given in the literature are made.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.4
• /
• pp.599-606
• /
• 1999

복합 적층 판과 보강 재를 설치한 보강된 복합 적층 패널의 좌굴을 고려한 설계에서, 좌굴이 항상 구조물의 최종 파손을 의미하는 것은 아니므로 이들의 좌굴 및 좌굴 후 거동에 대한 정확한 이해와 연구가 필요하다. 본 연구에서는 유한요소 법을 이용하여 적층 메커니즘과 섬유 배향각, 적층 순서 등이 복합 적층 판과 보강된 복합 적층 패널의 좌굴 및 좌굴 후 거동에 미치는 영향을 체계적으로 해석하였고, 각 변수에 따른 좌굴 및 좌굴 후 거동 특성을 분석하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.55-57
• /
• 2014

본 논문에서는 자동차 번호판 인식을 위해 직선검출법, 모폴로지에 의한 검출법을 사용하지 않고, Blob 레이블링 기법을 이용한 번호판 인식 기법을 제안한다. 고성능 컴퓨팅 시스템의 성능 향상을 위한 효율적인 동적 작업부하 균등화 정책을 제안한다. ITS분야에서 가장 중요한 요소라 할 수 있는 자동차 번호판 인식은 자동화된 차량 관리 시스템 구성에 필수적인 요소로 요구된다. 또한, 자동차와 관련된 정보는 직, 간접적으로 높은 중요도를 가지고 있으며, 자동차와 관련된 정보가 이용되는 영역은 교통관리, 교통량분석, 자동 요금 징수 시스템, 자동차 위법 단속 등 응용범위가 나날이 넓어지고 있다. 본 논문에서는 자동차 번호판 인식을 위해 Blob 레이블링 기법을 이용하였으며, 번호판 인식을 위한 영상 샘플은 오츠알고리즘을 이용하여 이진화된 영상을 사용하였다.