• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.81-91
• /
• 2006

The corrugated web is a plate that was manufactured with a corrugated shape. It is widely used in bridges, buildings, and culverts. A girder with a corrugated web can be crippled by local, in-plane compressive loads. Due to its high out-of-plane strength, however, a stiffener is usually not needed in trapezoidally corrugated plates, and the corrugated profile of the web can change the boundary condition of the edge load. Some researchers have studied the strength of the partial-edge loading of the trapezoidally corrugated web, but they have not considered the profile of corrugation in their studies. This paper investigates the influence of the corrugate profile. A parametric study was conducted on the shape parameter using the finite-element method. In this parametric study, the relationship between the corrugated shape and the partial-edge strength was also investigated by dividing the partial-edge strength into the web capacity and the flange capacity.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.1
• /
• pp.51-58
• /
• 2005

we can set laser patterns with 3D information from vision camera after projected to object with laser stripes. They are very useful for 3-Dimensional informations. We researched the laser patterns of human body projected by stripes and found out three featuring patterns and made database of patterns using Fourier descriptors to recognize the patterns of bodies. The HMM method and Fourier descriptors to recognize human body were experimented. We found out HMM method can recognize human body in more efficient rate than the other.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.67-79
• /
• 2016

Waveform micropile is an advanced construction method that combined the concept of conventional micropile with jet grouting method. This new form of micropile was developed to improve frictional resistance, which consequently leads to achieving higher bearing capacity and cost efficiency. Two field tests were conducted to examine the field applicability as well as to verify the effects of bearing capacity enhancement. In particular, waveform micropile construction using jet grouting method was performed to evaluate the viability of waveform micropile installation. After testing, the surrounding ground was excavated to check the accomplishment on the shape of waveform micropile. The result showed that waveform micropile can be installed by adjusting the grouting time and pressure. In the loading tests, waveform micropile's bearing capacity increased by 1.4 to 2.3 times depending on their shapes when compared with conventional micropile. Overall results clearly demonstrated that waveform micropile is an enhanced construction method that can improve bearing capacity.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.649-655
• /
• 2006

Waves progressing into the coastal area can be amplified, swashed and overtopped by a wave overtopping control structure, and it converts the kinetic energy of the waves to the potential energy with a hydraulic head above the mean sea level by conserving the overflow in a reservoir. Then the potential energy in the form of hydraulic head can be converted to electric power utilizing extremely low-head hydraulic turbine. This study aims to find the most optimal shape of wave overtopping structure which maximizes overtopping volume rate of sea water. Laboratory experiments for the performance evaluation of wave overtopping control structures were carried out in three dimensional wave tank, and the three dimensional structure models with planar wave concentration shapes(B/b) were manufactured into five classes, which were optimized by cross sectional parameters of the structure, ie, length of ramp(l), gradient of inclined ramp($cot{\phi}$) and freeboard height of the wave overtopping structure($h_e$) proposed by Shin and Hong(2005). The wave overtopping discharges were investigated with 20 incident wave conditions and wave directions of $0^{\circ},\;15^{\circ},\;30^{\circ}$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1049-1057
• /
• 2016

The waveform micropile is a type of foundation that has a single or multiple shear keys on the pile shaft, and it is constructed through a jet grouting method as a way to increase the shaft resistance of the bonded area between the pile and the soil. In this paper, a geotechnical centrifuge test was performed to study the axial performance of the waveform micropile from other models. The six test models consisted of three waveform micropiles with a single shear key at three different depths, a waveform micropile with multiple shear keys, a conventional micropile, and a jet grouting micropile. Based on the test results, it was clearly shown that the waveform micropile increased in its bearing capacity compared to the other models without the shear key. Additionally, it was observed that the confining pressure for the location of a shear key is directly related to the increase of the bearing capacity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.11-20
• /
• 2014

This paper aims at comparing and analyzing shear buckling characteristics between sinusoidal corrugation shape and trapezoidal one. For this, I adopted the equal-length trapezoidal corrugation and sinusoidal one for the analytical models, and analyzed their shear buckling characteristics through linear buckling analysis and on its theory. Generally, the shear buckling shapes of corrugated steel plates are classified into local buckling, global buckling, and interactive buckling from the two buckling modes. Sinusoidal corrugation shape, unlike trapezoidal corrugation, does not have flat sides, which causes another tendency in shear buckling mode. Especially, the changes and different aspects of shear buckling on the boundary between local buckling and global buckling appear in different corrugation shapes. According to the analysis results, interactive buckling mode appeared on the boundary of local buckling and global bucking in trapezoidal corrugation. However, in the case of corrugated steel plates with sinusoidal configuration, interactive buckling mode appeared in the part where global bucking takes place. Besides, trapezoidal shapes are of advantages on shear buckling resistance in the local buckling section, and so are sinusoidal shapes in the global buckling section.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.311-311
• /
• 2023

파형강관은 아연도금강판을 물결모양으로 성형하여 나선형으로 조관한 연성관으로 콘크리트 흄관을 대체하여 각종 토목공사의 우수 및 하수관으로 주로 사용되고 있다. 파형강관은 강판에 물결 형상을 성형하여 내하력을 부여하였기 때문에 높은 강도를 지니고 있고, 경량이고 유연성이 있어 기초공사가 쉽고 현장에서의 운반 및 보관이 용이하여 그 활용이 점차 확대되고 있다. 이러한 파형강관의 내/외부에 기능성 고분자 복합 Polymer(다중필름)을 코팅하여 일반 파형강관 대비 더 높은 내식성 및 내마모성을 구현한 제품을 NPE 피복 파형강관이라 하며, 내부에 평판을 2중으로 결합하여 일반 파형강관 대비 통수능력을 개선한 파형강관을 내부평활 파형강관이라고 한다. 최근 파형강관의 활용이 점차 확대되고 있음에도 불구하고, 파형강관에 국한된 수리역학적 특성에 관한 연구는 미흡한 실정이며, 그마저도 주로 만관 혹은 만관에 가까운 상태에서의 흐름만이 고려되어 왔다. 하지만 대구경의 파형 강관이 우수 배관 및 하수 처리를 위하여 설치될 경우 개수로 흐름이 발생하게 된다. 이에, NPE 피복 파형강관과 내부평활 파형강관 내에서의 개수로 흐름을 다양한 유량 및 수심 변화를 통하여 생성하였으며, 각각의 수리학적 조건에서 통수능을 결정하는데 중요한 상수인 조도계수를 수리 실험을 실시하여 결정하였다. 이는 현재 국내에서 생산되고 있는 NPE 피복 파형강관과 내부 평활강관의 활용에 있어서 국제 경쟁력을 높이는데 큰 도움이 될 것이라 사료된다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.720_721
• /
• 2009

일반적으로 BLDC 모터는 고효율 고토크의 특성을 가지고, 넓은 속도 범위에 걸쳐 높은 효율을 유지 하고 제어가 용이하므로 널리 사용 되고 있다. 이러한 BLDC 모터는 구동 원리에 의해서 역기전력의 파형이 구형파를 가지는 것이 유리하다. 또한 BLAC 모터는 효율, 역률, 전력밀도 및 토크 밀도가 높은 장점을 가지고 정현파 역기전력을 요구한다. 매입형 영구자석형 동기전동기 중 할박 구조로 인해서 자속을 집중 시키는 Spoke type 모터의 회전자 표면은 철심으로 이루어져 있기 때문에 회전자 표면의 형상을 Arc설계를 통해서 형상 최적화가 가능하다. 회전자 표면의 Arc 설계를 통해서 공극의 자속밀도 분포의 변화를 줄 수 있어 BLDC 구동 시 요구하는 구형파 역기저력 파형과 BLAC 구동 시 요구되는 정현파 역기저력 파형을 Arc 설계 각도에 따라 다르게 발생 시킬 수 있다. 이를 통해서 역기전력을 형태를 구형파와 정현파 형태를 가지도록 설계하여 BLDC와 BLAC 구동 시에 성능을 FEA를 통해서 비교 평가 하여, 구동 방식에 따른 Spoke type IPM 모터의 형상 설계방법을 제시한다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.5 s.66
• /
• pp.591-601
• /
• 2003

Because of their high out-of-plane and in-planes strength, trapezoidally corrugated plates have been increasingly used in buildings and bridges. If corrugated plates are used as the web of plate girders or prestressed concrete box girders, the flanges take most of the bending stress. On the other hand, the corrugated plate web supports shear stress due to the accordion effect. The corrugated plate web could fail by three different buckling modes: global, local, or interactive shear buckling. To determine the effects of geometric parameters on the buckling capacity of the corrugated plates, a parametric study was performed using finite dement method. The analysis results showed that the buckling capacity and modes depend on individual parameters as well as combinations of parameters.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.539-543
• /
• 2014

임의의 물체가 유체 내에서 운동하거나 정지해 있을 때 유체에 의해서 운동에 방해가 되는 힘을 형상저항이라고 한다. 형상저항은 레이놀즈수에 의한 경계층의 흐름형태에 따라 변화하며, 경계층의 흐름형태는 레이놀즈수가 $10^5$보다 작은 경우 층류로, 그 이상의 경우 난류로 나타난다. 본 연구에서는 유체 내에 물체가 정지해 있을 경우 조도에 따른 형상저항의 변화를 알아보기 위해 각기 다른 조도를 가진 실린더를 모델링해 EDISON_CFD을 이용하여 전산 해석을 하였다. 실린더의 표면에 파장의 주기와 진폭, 층류와 난류 영역에서의 항력계수의 변화에 대해 검토하였다.