A Study on the Geometric Parameters that Influence the Trapezoidally Corrugated Webs Under Partial Edge Loading

제형파형강판의 지압 거동에 영향을 미치는 기하학적 인자에 관한 연구

  • 최용주 (고려대학교 사회환경시스템공학과) ;
  • 이종원 (고려대학교 사회환경시스템공학과) ;
  • 신철호 (현대건설기술개발원) ;
  • 이학은 (고려대학교 사회환경시스템공학과)
  • Received : 2005.09.13
  • Accepted : 2005.12.29
  • Published : 2006.02.27

Abstract

The corrugated web is a plate that was manufactured with a corrugated shape. It is widely used in bridges, buildings, and culverts. A girder with a corrugated web can be crippled by local, in-plane compressive loads. Due to its high out-of-plane strength, however, a stiffener is usually not needed in trapezoidally corrugated plates, and the corrugated profile of the web can change the boundary condition of the edge load. Some researchers have studied the strength of the partial-edge loading of the trapezoidally corrugated web, but they have not considered the profile of corrugation in their studies. This paper investigates the influence of the corrugate profile. A parametric study was conducted on the shape parameter using the finite-element method. In this parametric study, the relationship between the corrugated shape and the partial-edge strength was also investigated by dividing the partial-edge strength into the web capacity and the flange capacity.

파형 강판은 파형 형상으로 가공한 강판으로 교량, 건축물, 암거 등의 구조물에 많이 사용된다. 파형강판을 이용한 거더의 구조물 적용시 국부적인 면내 압축하중에 의해 크리플링현상이 발생할 수 있는데 높은 면외방향의 강성을 갖는 파형강판의 특성 때문에 보강재를 사용하지 않는 경우가 많이 있고 파형형상에 따라 지압하중의 경계조건이 달라진다. 몇 연구자들이 제형파형강판의 지압강도에 대한 연구를 하였으나 파형형상이 지압강도에 미치는 영향이 크게 고려되지 않았다. 따라서 본 연구에서는 이에 따른 영향을 유한 요소해석법을 통하여 여러 가지 파형형상에 대한 변수해석을 하고 지압강도를 복부판 내하력과 플랜지 내하력으로 나누어 파형 형상과 지압강도와의 상관관계를 파악하였다.

Keywords

References

  1. 길흥배, 이승록, 이학은, 윤태양 (2004) 제형파형강판을 사용 한 교량 복부판의 탄성 전단 좌굴에 관한 연구, 대한토목학회논문집A, 대한토목학회, Vol24, No1 pp. 197-202
  2. 문지호, 이승록, 길흥배, 이학은 (2004) 제형 파형 강판 복부 판의 전단 거동에 관한 실험 연구, 대한토목학회논문집A, 대한토목학회, Vol.24 No. 2 pp. 409-416
  3. 이종원, 길흥배, 김광수, 이학은 (2004) ILM으로 건설되는 제 형파형강판을 갖는 PSC교량의 크리플링 현상에 관한 수 치해석, 2004년도 대한토목학회 학술발표논문집, 대한토목학회, pp. 73-78
  4. 加藤, 谷口, 依田, 佐藤 (1997a) 本谷橋 (波形鋼板ウエブPC 橋)の模型實驗. プレストレスコンクリート技術協會, 第7 回PCシンポジウム論文集
  5. 加藤, 芦塚, 依田, 佐藤 (1997b) 本谷橋(波形鋼板ウエブPC箱 桁橋)の設計について. プレストレスコンクリート技術協 會, 第7回PCシンポジウム論文集
  6. 水口, 大甫, et al. (1998) 本谷橋の設計と施工, 橋梁と基礎
  7. Bergfelt, A. (1971) Studies and tests on slender plate girders without intermediate stiffeners. IABSE Coll. Proc., London, England
  8. Bergfelt, A. (1979) Patch loading on slender web - influence of horizontal and vertical web stiffeners on the load carrying capacity. Report S79:1 Chalmers University of Technology, Goteborg, Sweden