• Journal of Biomedical Engineering Research
• /
• v.16 no.4
• /
• pp.525-532
• /
• 1995

In this paper, a new try to measure nonlinear propagation characteristics of the pulse along blood vessel by using bispectral analysis is introduced, and the possibility of its application to the medical diagnosis is shown. In this method, the waveforms of pulse motion of blood vessel at two separated measuring points on the wall were detected from Doppler frequency modulation of transmitted probing ultrasonic waves. Then the auto- and crossbispectrum of detected waveforms are calculated to estimate the quadratic NTF (nonlinear transfer function) between the two measuring positions. In order to show relationships between the NTF and the nonlinear propagation characteristics, computer simulations have been performed. As the propagation distance increases, harmonic frequency components in NTF increases broadly due to the nonlinear effect in the propagation of blood pulse. In order to represent this phenomena quantitatively, we propose a new parameter, dispersion ratio of WTF. Basic experimental system was constructed by using 3.5MHz probing ultrasonic waves and the preliminary experiments were carried out on ague phantom and human body. Experimental results showed the validity of the measurement system enoughly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.1
• /
• pp.147-156
• /
• 2003

In this research, multiple corrosion factors of buried environments were measured in order to establish a formula for the corrosion character of corrugated steel structures in domestic environments. By substituting corrosion factors for each predicting formula, the durable lifetime was measured, and the measured lifetime was compared with the estimated lifetime by applying existing thickness-measuring techniques. A new usage standard was proposed with these results, in order to create the conclusion below. There are known differences in the soil factors used as variables in estimating the duration caused by the seasonal effects of rainfall and temperature. Comparing the durable lifetime estimated by each predicting formula, the findings show that the California technique is conservative. This study demonstrates that the error range of the AISI technique, which is mostly used as a duration technique, is a very narrow predicting technique as compared with many other countries. Considering that there is on average, a 13% error margin in this study, a proposed safety factor of 0.87 could be used to more accurately predict the duration. The laying time in the California technique is not longer than the whole durability, and as a result, this error margin exists. It is concluded that this study on the open area has been overdue. Based on these findings, it's proposed that this error margin should be applied to the domestic environment through periodic observation, in order to establish the predicting techniques of durable lifetime.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.461-467
• /
• 2002

Signals produced from the brain had been considered as a noise that is caused by the stochastic process until 1980. The recent non-linear dynamic theory researches, however, reported that these signals are meaningful and deterministic chaos signals in which they show how the brain deals with various information Since this report a wide range of researches has been carried out and still in progress. Thus, by using the correlational dimension, one of the non-linear analytical methods, the characteristics of the brain signals can be analyzed. In this thesis, the scent of lavender, which stimulates the olfactory sense, is introduced to measure EEG with the International 10-20 electrode system on 16 channels, and to analyze the interrelationship between the original signals before the stimulation and the changed signals after the stimulation. Finally, the effect of the scent stimulation to the brain is analyzed. The purpose of this thesis is to apply these analyzed results to the computerized mapping of the brain signals and possible ways of specifying the source of the brain signals through various medical applications.

• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.244-252
• /
• 2008

This research differentiate the technique of Jungkwon-jirugi, one of the basic movements of Taekwondo, into two movements stop-jirugi and push-jirugi and gives analysis of the impulse, acceleration and velocity in the point of motor control. For this, we tried graphic analysis using an acceleration sensor and high speed camera which was made from USA in 2005 and took pictures at 250 frames per second. We reached the following conclusions. First, the acceleration wave of push-jirugi was a period longer than stop-jirugi, meaning that the push-jirugi motion asserts force for a longer time. Second, the acceleration and velocity graph shows that the highest velocity occurs on the point when the acceleration begins to decrease right after reaching its maximum. Third, according to the image analysis using the high speed camera, we could find out that the shoulder is pushed a little even in the stop-jirugi motion.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.75-88
• /
• 2006

This paper evaluates the feasibility of use of high-strength steel for soil-metal corrugated steel structures. Two specifications, the AASHTO(2004) and the CHBDC(2000), were compared and the scientific background of equations for the buckling stability in those specifications were investigated to figure out the governing factors for buckling strength of structures. Numerous finite element analyses for round-pipe type of soil-metal corrugated steel structures were carried out with considering the elastic-plastic relationship of a material and the geometrical non-linearity, as well as the various design variables, such as span length, depths of soil cover, section properties, tensile strength and backfill conditions. Buckling strength equation of the CHBDC(2000) is still valid and conservative for both normal and high-strength steel soil-metal corrugated steel structures, and the buckling strength increases with the use of hight-strengths steel.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.7
• /
• pp.51-58
• /
• 2014

In-situ capping is a method to stabilize contaminated sediments by isolation. Few researches on the in-situ capping have been performed, although the engineering approach is still required to prevent the release of contaminants. In this study, hydraulic model test were conducted by using a wave generator to observe the change of cap thickness which is important factor in design of capping. Sands with particle size between 0.075 to 2 mm as capping materials were used to observe the change of capping thickness by waves. The experimental results show that the surface of capping materials is similar to wave form. The more wave height increases, the more erosion of capping materials increases.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.29-38
• /
• 1985

In this paper we have designed and implemented in real time a simple, efficient and flexible AOPCM cosec using a high speed digital processor, NEC 7720. For ADPCM system, we have used an instantaneous adaptive quantizer and a first-order fixed predictor. The software for NEC 7720 has been developed and it was found that the NEC 7720 was capable of performing the entire ADPCAt algorithm for 4 channels in real time as optimizing the program. Computer simulation has born made to investigate a computational accuracr of NEC 7720 and to de-termine necessary parameters for a ADPCM codec. Real telephone speech, RC-shaped Gaussian noise and 1004 Hz tone signal were used for simulation. In simulation, the parameters werc optimized from the computed SNR and the informal listening test. The developed software was tested in real time operation using a hardware emulator for NEC 7720. It took a maximum 23.25$\mu$s to encode one sample and 113.5$\mu$s, including all the necessary 1/0 operations, to encode 4 channels. In the case of decoding process, it took 24.75$\mu$s to decode one sample and 119.5$\mu$s to decode 4 channels.

• Applied Microscopy
• /
• v.34 no.1
• /
• pp.51-59
• /
• 2004

The high acceleration voltage system used in scanning electron microscope were designed and manufactured to test its stability. The Cockcroft-Walton circuits are used both in the cathode voltage up to -30 kV and in the Wehnelt cylinder of -2 kV. The operating voltage of 6 V was applied to the heating of the filament. The wave forms which are formed in the second leg of the high voltage transformer were observed in the oscilloscope with 2 V of DC input. When the high voltages were in the range between 5 kV and 12 kV, the highest value of the stabilities of the generated voltages was obtained as 0.002%.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.85-93
• /
• 2012

In this paper, I designed the satellite system, using the MF-TDMA (Multi Frequency-Time Division Multiple Access) DAMA (Demand-Assigned Multiple Access) method, that allocates the satellite resources more effectively to prevent a large quantity data discard when Earth Terminals (ETs) request their satellite network resource to Network Controller (NC) by using their history information, such as traffic pattern or traffic class which have been receiving, and the network controller allocates the satellite network resource and send to earth terminals by using his history information that earth terminals have been requested already. The U.S. Military Warfighter Information Network-Tactical (WIN-T) community has selected the L-3 Linkabit MF-TDMA DAMA Network Centric Waveform (NCW) as the networking standard for full-mesh IP over SHF satellite communications. In the MF-TDMA DAMA satellite network, network controller allocates the satellite network resources and enables maximum 255 earth terminals to communicate each other for periodic satellite network resource requests of earth terminals.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.876-883
• /
• 2016

In this study, we selected CFRP to construct a canoe hull. A ship design was made using a commercial ship design program, SOLIDWORKS, and a flow analysis of the canoe on a free surface was calculated using STAR-CCM+. A flow field and waveform were obtained in this way. These results were used to check the resistant performance of the canoe. Results showed that if the draft is 0.09 m, it is safe to run at less than 4 m/s, and if draft is 0.24 m, it is safe to run at less than 2 m/s. Moreover, it was confirmed that those speeds can be made by two adults. The developed canoe, which is 20 % lighter in comparison with conventional FRP models, was briefly introduced in this paper.