• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.244-245
• /
• 2000

비선형광학 결정을 이용한 optical parametric generation(OPG)은 coherent tunable radiation을 얻는 방법으로 매우 효과적이다. Beta barium borate(BBO) 결정은 비선형성이 클 뿐만 아니라 광손상문턱이 높고 자외선에서부터 근 적외선영역까지(2 -0.2$mu extrm{m}$) 투명하여 optical parametric oscillation(OPO)이나 OPG/OPA(optical parametric generation/amplification)에 많이 활용되고 있다.[1-2] 분광학적 연구와 여러 가지 응용 측면에서 넓은 영역의 파장가변이 손쉽고 높은 에너지를 갖는 pico 초coherent source는 중요하며, 이는 결정의 비선형성을 이용하여 공진기를 구성하지 않고서도 OPG/OPA를 통하여 실현 가능하다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.469-474
• /
• 2004

We have fabricated and designed wavelength-tunable sampled grating distributed Bragg reflector laser diodes(SGDBR-LD) by using, for the first time, planar buried heterostructures(PBH). The diodes have low threshold current values and high-performance of laser operation. Growth condition using metal organic chemical vapor deposition(MOCVD) was optimized for the formation of a good butt-coupling at the interface. A maximum output power of the fabricated device was 20 mW under 200 mA continuous wave(CW) operation at $25^{\circ}C$. Average threshold current and voltage were 12 mA and 0.8 V, approximately. This output power is higher than those of ridge waveguide(RWG) and buried ridge stripe(BRS) structures by amounts of 9 mW and 13 mW, respectively. We obtained a tuning range of 44.4nm which is well matched with the target value of our design. The side mode suppression ratio of more than 35 dB was obtained for the whole tuning range. Optical output power variation was less than 5 dB, which is 4 dB smaller than that of RWG structures.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.384-389
• /
• 2002

A new idea of the wavelength locking module for DWDM application was investigated in the present research. Only one etalon photo-diode is generally used in the internal/external wavelength locking system. For the internal wavelength locking module with 50 GHz applications, an algle tuning method of the etalon commonly applied. However, the alignment process of the etalon with the angle tuning method is limited because the lock performance is extremely sensitive accoriding to the change of the tilting angle. In an optical viewpoint, the alignment tolerance of the locker module with the etalon PD array block was good, and the precise tuning of the wavelength was possible. The characteristics of free spectral range (FSR) and peak shift of wavelength according to the tilting angle with the locker module was investigated. For the present module, the optimized initial tilting angle was experimentally obtained.

• Korean Journal of Optics and Photonics
• /
• v.20 no.3
• /
• pp.189-194
• /
• 2009

We demonstrate a ring type wavelength swept laser incorporating a fiber Fabry-Perot tunable filter in a laser cavity using 1300 nm semiconductor optical amplifier as a gain medium. The output characteristics of the wavelength swept laser according to the applied scanning frequencies are analyzed in the temporal and spectral domain. The output of the wavelength swept laser decreases dramatically as the scanning frequency increases. And there is a significant peak power imbalance between the forward scan and the backward scan as the scanning frequency increases. Its use in practical applications might be limited.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.149-153
• /
• 1997

We demonstrate the operating characteristics(center wavelength, bandwidth, TE/TM polarization, tuning range) of grating-assisted co-directional coupler(GACC) filter fabricated with InGaAsP compound semiconductor. A design of waveguide structure has been focused on the narrow bandwidth characteristics of the filter. Reactive ion etching technique was employed for the uniform waveguide formation. The bandwidths(FWHM) and center wavelengths of the fabricated GACC filter were measured by 1.5 nm and 1530.6 nm for TE polarization and 1.3 nm and 1494.0 nm for TM polarization. This is the one of the narrowest bandwidth at 1530 nm region ever reported. The center wavelength shifted form 1530 nm to 1538 nm when the current of 100 mA was injected at 4.5 mm-long device. Good agreement between the designed and measured operating characteristics for some waveguide structures is demonstrated.

• Journal of KIISE:Information Networking
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2002

In this paper the Dynamic Minislot Reservation Protocol(DMRP) in which the control channel is divided into contention-less and contention minislots in order to reduce re-transmission probability in multicasting is proposed. In the network, earth node has two pairs of transceivers. A transceiver consisting of a fixed transmitter and a fixed receiver is used to control packet registration and the other transceiver is used to transmit data. Two types f transceivers for data transmission are considered : one is FT-TR(Fixed Transmitter-Tunable Receiver) and the other is TT-TR(Tunable Transmitter-Tunable Receiver). In the analysis, FT-TR and TT-TR single-hop passive star networks are compared. As results, we conclude that the DMRP protocol with dynamically divided control channel has improved the system performance such as throughput and system delay regardless of traffic type or network structure.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.238-243
• /
• 1996

We have developed XeCl laser pumped double-resonator Dye laser and two-stage amplifier system, and generated simultaneously of alternatively two wavelengths suitable in DIAL system. The developed double-resonator is composed of 1st and 2nd diffraction orders on light incidence angle in grazing-incidence grating method with 1200 g/mm. We have obtained spectral linewidth below 10 pm and the total efficiency dependent on pump energy over 6%. The tuning ranges dependent on 1st and 2nd diffraction orders are 434~470 nm and 436~468 nm, respectively. The amplification gain and rine-450 dye laser by using the double-resonator laser system and measured the distribution of $NO_2$ concentration over Suwon as the result of transmission of laser output of 6 mJ in this DIAL system. Consequently, we have confirmed that the developed dye laser system is very useful as the tunable source for DIAL.

• Korean Journal of Optics and Photonics
• /
• v.19 no.3
• /
• pp.229-236
• /
• 2008

The optimum conditions of second harmonic generation (SHG) can be successfully achieved experimentally using single pass and double pass methods of a pumping beam. The beam has a power of several Watts radiated by a DOFA (Diode Laser Oscillator & Fiber Amplifier) system, which is a high power CW wavelength tunable infrared laser system, in a PPLN (Periodically Poled MgO doped Lithium Niobate) nonlinear crystal. In the case of a single pass method, the parameters are the wavelength of 535 nm for SHG and the output power of 245 mW generated from the pumping input beam with wavelength of 1070 nm and the power of 2.45 W at phase matching temperature of $108.9^{\circ}C$. The conversion efficiency of SHG was 10%. In order to enhance the output of SHG, the double pass method of the SHG system of a PPLN using a concave mirror for the retroreflection and a pair of wedged flat windows for phase compensation was also presented. In this double pass system, we obtained the SHG output beam with the wavelength of 535 nm and the maximum power of 383 mW at optimum phase matching temperature of $108.5^{\circ}C$ by using an incident pumping beam with wavelength of 1070 nm and the power of 2.45 W. The maximum conversion efficiency is 15.6%, which is more than that of the single pass method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4C
• /
• pp.430-436
• /
• 2009

In this paper, we propose and describe our implementation of an automatic control system for the center wavelength of a fiber Bragg grating. The proposed system consists of a Fabry-Perot filter and cantilever structure controlled by a step motor interfacing computer. We consider the change of the center wavelength and the reflective spectrum shape for a given FBG according to the translation distance of the push stick and the cantilever thickness variation. The proposed system can control the center wavelength of a FBG with a resolution of 0.01 nm by applying compression or extension to the FBG. The proposed system has characteristics that keep the desired wavelength of the FBG with a variation of environmental conditions.

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.244-249
• /
• 1996

Multipass Ti:sapphire amplifier for the light source of DIAL was developed with an angular-multi-plexing, and the characteristics of output energy and spectra were investigated. As the characteristics of two-stage multipass amplifier, the maximum output energy was 22 mJ and the amplification gain was 20 dB on the wavelength of 790 nm. At that condition, output efficiency of the pumping energy was 18 percent. We obtained $0.15cm^{-1}$ (9.4 pm) as a spectral linewidth in the tuning range of 705~845 nm.