• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.114-121
• /
• 2016

This study investigates a CFD modeling of the charge-discharge behavior due to heat generation during charge-discharge cycles of a Li-ion secondary battery(LIB). Present LIB system adopted a current-density equation, heat and mass transfer governing equations upon the 1-dimensional system to the thickness direction for the rectangular pouch configuration. According to the 3-kinds of the charge-discharge current densities of 1C($17.5A/m^2$), 3C($52.5A/m^2$) and 5C($87.5A/m^2$) subject to a 3 V of cut-off voltage, a constant-temperature system at 298 K and three different heat generating systems were analyzed with comparison. Battery capacity decreases with increment of charge-discharge densities not only at the constant-temperature system but also at the heat-generating system. The time for charge-discharge cycles increases at the heat-generating system compare to the constant-temperature system. These trends are considered that the increase of temperature due to heat generation causes the decrement of equilibrium potential of electrodes and the increment of diffusivity of Li ions. Furthermore, cooling effects were discussed in order to control the influence of heat generation due to charge-discharge behavior of a Li-ion secondary battery.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.2
• /
• pp.89-95
• /
• 2017

Although the global coffee market is growing every year and the demand for coffee wrapping paper is increasing accordingly, research on the effect of PE material and PP material on the coffee aroma used in the sealant layer, which will directly contact the product, is lacking. In this study, we studied the change of aroma patterns and flavor materials by adding coffee to PP and PE pouches. In addition, we observed changes in aroma patterns depending on the temperature and the presence of the deoxidizer. As a result, it was found that the PP type packaging material was slightly better than the PE type packaging material, but the performance was hardly changed by the material. Rather, the change in the aroma pattern due to temperature was dominant rather than the material. It is ideal that refrigerated distribution ($4^{\circ}C$) is the best storage temperature and sales are done within a short period of time. Among the indicators, pyridine was the most suitable material to study and there are many data about pyridine. Therefore, it is expected that the results can be derived by using pyridine.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.173-181
• /
• 2017

This study was conducted to investigate the packaging characteristics including pack sources and pack components of processed foods in Korea. For the survey, 704 food package samples were selected based on the consumption of top 10 brackets in each food item. They were consisted of 1,245 packaging components. Seven specific items were firstly investigated including product name, capacity of the food, package component, package source, food contact area, food contact ratio, and package thickness. The processed foods in Korea can be classified into 16 pack sources and 21 pack components, respectively. By using this information, the data were analyzed specifically. The collected data were analyzed in 8 major categories: frequency of use by pack components and pack sources, pack components by the products, pack sources by the products and pack components, pack thickness/food contact ratio by the products, food contact ratio by pack components and pack sources. Consequently, this survey will provide various information of the packaging characteristics of processed foods in Korea.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.147-151
• /
• 2005

Retort pouch is widely used in food industry for a long-term preservation and safe food production. By applying retort pouch technique to waxycorn storage, the quality of waxycorn could be maintained and the storage expense could be saved during storage. Water activities(Aw) of retort waxycorn were below 0.80 except blanching treatment, and it is known that microbial propagation is subdued below 0.80. Commercial value of waxy corn was deteriorated when it was frozen quickly at $-40^{\circ}C$ before treating Retort due to obscurity of chromatocity, while the color change was not noticeable when it was treated with Retort at $121^{\circ}C$ for 10min. For all treatments, very small amounts of free sugar were detected, however, there were no significant differences between treatments. As storage period was longer, shelf lifes of waxy corn in control and waxy corn treated with blanching were more shortened when waxy corn was stored at $15,5^{\circ}C$ before Retort, while waxy corn with boiling treatment was not significantly different compared with that in storage in freezer.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.971-976
• /
• 2002

Effect of storage temperature and packing method on the changes in pH, acidity, the levels of lactic acid bacteria, volume expansion of packages and the colorness during the fermentation of kakdugi (diced radish kimchi) were investigated. The fermentation characteristics were greatly influenced by the temperature. The pH of kakdugi fermented at 15$^{\circ}C$ was 4.10 at 3 days, while the pH of kakdugi fermented at $0^{\circ}C$ was 4.03 at 18 days. The acidity of kakdugi fermented at $0^{\circ}C$ very slowly increased compared to that of the kakdugi fermented at 15$^{\circ}C$, 1$0^{\circ}C$ or 5$^{\circ}C$. The required days to reach the acidity of 0.6% (optimally ripened state) were 6 days at 15$^{\circ}C$, 7 days at 1$0^{\circ}C$, 18 days at 5$^{\circ}C$ and 30 days at $0^{\circ}C$. Despite of different fermentation temperature, the numbers of Leuconostoc sp. in optimally ripened kakdugi were similar. However, Lactobacillus sp. in kakdugi fermented at $0^{\circ}C$ was the smallest in number. Also, the volume expansion of aluminum pack was the lowest in kakdugi fermented at $0^{\circ}C$. Both pH and acidity of the kakdugi fermented in different packing condition did not show any difference at 1$0^{\circ}C$ for 20 days, however, the color of the kakdugi was affected by a packing method. Aluminium laminate package in which Ca(OH)$_2$ Pack stuck inside resulted in decolorization of kakdugi compared with aluminum package without Ca(OH)$_2$ pack or plastic jar. It showed the lowest redness and the highest lightness and yellowness. These results indicated that fermentation at $0^{\circ}C$ could increase storage period of kakdugi with minimum growth of Lactobacillus sp., and plastic jar might relieve the problem of volume expansion and decolorization of kakdugi.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.13 no.3_4
• /
• pp.107-112
• /
• 2007

The effect of microwave heat to retort pouches and microwavable packages was examined. 186 products were collected, but packages were consisted of five package materials such as PET, Aluminum foil, Nylon, EVOH, and polypropylene. The results showed that all packages did not exceed the limits of current packaging regulation on consumption weight of $KMnO_4$, TDI(Toluene diisocyanate), and Caprolactam. Safety control on heat resistant packages considered satisfactory, but investigation on new substances should be continued for preventing any possible migration problems of packaged foods.

• Korean Journal of Food Science and Technology
• /
• v.13 no.2
• /
• pp.153-159
• /
• 1981

A study was carried out to determine the optimal sterilization conditions of cooked rice packed in retort pouch and processed in a steam-air system retort. The cooked rice packed in retort pouch in various thickness (15, 20 and 25 mm) was processed at various heating temperature (110, 115 and $120^{\circ}C$) with $F_0$-value 6.0. In order to evaluate quality change during the thermal prosessing, C-values, based on z-value $33^{\circ}C$ and $F_0$ value 6.0, were also calculated at surface, center and mass average temperatures. Subsequent storage study revealed that the cooked rice packed in 15 mm thickness and processed at $120^{\circ}C$ with$F_0$-value 6.0 could be held without any spoilage and color change, when stored for 6 months at $38{\pm}1^{\circ}C$ under saturation humidity.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.414-420
• /
• 1983

Heating characteristics for retort pouches of Kimchi heated in hot water were determined as a function of various parameters for processing. Processing conditions in laboratory and commercial retort were also evaluated on the basis of storage test. D values for Lactobacillus plantarum isolated from test sample ranged from $D^{1.08}\;to\;D^{0.18}$ and z value was $10.5^{\circ}C$. Thermal diffusivity of Kimchi increased from 1.15 to $1.44{\times}10^{-3}cm/s$ by blanching for 15 min at $80^{\circ}C$. The rate of heat penetration was significantly decreased with increasing the thickness of the pouch although the decreases was less significant below 1.0cm thickness. Increasing in the ratio of solid to syrup up to 90:10 proportionately decreased $f_h$ value, but above the ratio $f_h$ values were nearly constant.

• Journal of the Korean Electrochemical Society
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2018

Many studies on the electrochemical performance of Li secondary batteries have been obtained using coin-type cells due to the ease of assembly, low cost and ensuring reproducibility. The coin-type cell consists of a case, a gasket, a spacer disk, and a wave spring. These structural features require a greater amount of liquid electrolyte to assemble than other types of cells such as laminated cells and cylindrical cells. Nevertheless, little research has been conducted on the effect of excess liquid electrolytes on the electrochemical performances of Li secondary batteries. In this study, we investigate the effect of different amounts of electrolyte on the coin-type cells. The amount of electrolytes is adjusted to 30 and $100mg\;mAh^{-1}$. Cycle performances at room temperature ($25^{\circ}C$) and high temperature ($60^{\circ}C$) and high voltage are performed to investigate the electrochemical properties of the different amount of electrolytes. In the case of the unit cell including the electrolyte of $30mg\;mAh^{-1}$, the discharging capacity retention characteristic is excellent in comparison with the case of $100mg\;mAh^{-1}$ under the high temperature and high voltage condition. The former shows a larger increase in internal resistance than the latter, confirming that the amount of electrolyte significantly influences the discharge capacity retention characteristics of the battery.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1171-1176
• /
• 1996

The changes in volatiles of the model system were analyzed by GC and GC-MS before and after retorting. The GC data were analyzed statistically by applying the analysis of variance, and 42 peaks were selected at 5% significance level. Multivariate statistical analysis was performed with these 42 peaks as independent variables. Through the stepwise discriminant analysis, 8 peaks, which corresponded to the compounds such as 2-heptanone, cis-3-hexenal, 2-pentyl-furan, 1-methyl-trans-1,2-cyclohexanediol, 2-hexanone, 3-octanone, trans, trans-nona-2,4-dienal and 1-octen-3-ol, were obtained in sequence to distinguish the samples with and without retorting. The principal component analysis of a set of 8 independent variables resulted in 3 principal components which accounted for 96.1% of the variance, while the first principal component (PC 1) explained 76.5% of the total variance. In addition, through the factor analysis of the principal components, the peaks 11, 20 and 21 could be grouped togather in accordance with the direction and the size while the peaks 9, 33 and 39 constituted the second group in the direction.