• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.129-130
• /
• 2018

리튬 이온 배터리가 전기 자동차 및 다양한 어플리케이션에 적용됨에 따라 배터리 관리 시스템(BMS)의 중요도가 높아지고 있다. 리튬 이온 배터리의 SOC(State of Charge) 및 단자전압 추정은 BMS에서 필수적이며 다양한 알고리즘을 통해 연구되고 있다. 본 논문에서는 비지도 학습 알고리즘인 뉴럴 네트워크의 학습을 위해 특성 파라미터(Characterstic Parmeter)를 선정하였으며, 특성 파라미터의 학습을 통해 리튬 이온배터리의 단자 전압 및 SOC를 추정하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.215-217
• /
• 2020

본 논문은 배터리 팩 내부 셀 파라미터의 불균일도에 대한 분석을 실시하고 이를 기반으로 과방전을 사전에 진단할 수 있는 방법을 제안한다. 이를 위해서 배터리 팩 내부 셀간 편차가 발생하는 셀을 선정하여 두 셀간 특성 분석을 실시하였으며, 이를 기준으로 예측 모델을 구성하였다. 예측 성능을 통해 배터리 전압 예측 성능에 영향을 미치는 인자를 분석하였으며, 배터리 전기적 등가회로 모델을 기반으로 예측 모델을 제안한다. 예측 모델은 실제 과방전이 발생한 셀을 기준으로 실험데이터와 비교하여 예측 성능을 검증하였다.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2004

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area optimized selection of base station, and eel design, etc. In the stage of these analyses, we have to present the propagation prediction mood which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area in addition we need to perform an analysis of the conventional mode which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable cuteness.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.11-19
• /
• 2011

In this paper, Service Boundary Line approximation method is proposed to improve the accuracy of aggregated link state information for source routing in transport networks that conduct hierarchical QoS routing. The proposed method is especially useful for aggregating links that have both delay and bandwidth as their QoS parameters. This method selects the main path weight in the network and transports the data to the external networks together with the aggregation information, reducing information distortion caused from the loss of some path weight during aggregation process. In this paper, the main path weight is defined as outlier. Service Boundary Line has 2k+5parameters. k is the number of outliers. The number of storage spaces of Service Boundary Line changes according to the number of outliers. Simulation results show that our approximation method requires a storage space that 1.5-2 times larger than those in other known techniques depending on outlier selection method, but its information accuracy of proposed method in the ratio between storage space and information accuracy is higher.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.7
• /
• pp.612-618
• /
• 2007

The dynamic behaviors of a KT-1 family aircraft nose landing gear have been analyzed and the optimal design of an aircraft shock absorber has been conducted to improve efficiency of shock energy absorption. The nose landing gear is modeled as a 2 DOF system using ADAMS and various operational and environmental landing conditions were considered. The results of dynamic simulation for various landing conditions agree well with experiments. Also the effect of parameters of a shock strut on the dynamic behaviors and on shock energy absorption of the nose landing gear has been evaluated for optimal design to define design variables. It has been found that the parameters of a shock strut such as oil-density and orifice area have more effects on dynamic behaviors than those of operation conditions. Optimal design is performed to maximize the efficiency of shock energy absorption using Feasible Direction Method. As a result the design values of the shock strut for maximum efficiency of shock energy absorption are derived and it turns out that efficiency and dynamic behaviors of the nose landing gear were improved by the optimal design.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.11a
• /
• pp.204-209
• /
• 2003

In an urban area telecommunication using wireless system, the accurate prediction and analysis of wave propagation characteristics are very important to determine the service area, optimized selection of base station, and cell design, etc. In the stage of these analyses, we have to present the propagation prediction model which is varied with the type of antenna, directional angle, and configuration of the ground in our urban area. In addition we need to perform an analysis of the conventional model which is similar to ours and dig out the parameters to evaluate the wave environment before the cell design for the selected area. In this paper, we propose a wave propagation prediction model concerning the topography and obstacles in our urban area. We extract the parameters and apply them to the proposed wave environment for the simulation analyzing the propagation characteristics. Throughout these analyzing procedure, we extracted the essential parameters such as the position of the base station, the height of topography, and adequate type and height of the antenna with our preferable correctness.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.436-442
• /
• 2013

Friction welding is a very useful joining process to weld metals which have axially symmetric cross section. In this paper, the feasibility of industry application was determined by analyzing the mechanical properties of weld region for a specimen of tube-to-tube shape for excavator hose nipple with friction welding, and optimized welding variables were suggested. In order to accomplish this object, friction heating pressure and friction heating time were selected as the major process variables and the experiment was performed in three levels of each parameter. An acoustic emission(AE) technique was applied to evaluate the optimal friction welding conditions nondestructively. AE parameters of accumulative count and event were analyzed in terms of generating trend of AE signals across the full range of friction weld. The typical waveform and frequency spectrum of AE signals which is generated by friction weld were discussed. From this study the optimal welding variables could be suggested as rotating speed of 1300 rpm, friction heating pressure of 15 MPa, and friction heating time of 10 sec. AE event was a useful parameter to estimate the tensile strength of tube-to tube specimen with friction weld.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1131-1142
• /
• 2013

This study aims to verify the applicability of TRANSIMS (TRansportion ANalysis SIMulation System) in interrupted traffic flow through calibration and validation process based on observation data; such as headway, traffic volume, speed, and travel time from Dalguberl Boulevard in Dae-gu metropolitan city. On this study, several micro-simulation parameters are derived from the calibration and validation process through performing a headway comparison and applying an ID back tracking methodology. As a result, it is figured out that actual circumstances of Korean roadway; for example, traffic volume per lane, speed, and travel time, can be applied on the TRANSIMS. Especially, it was possible to find out the influence of cell size parameter to traffic flow characteristic of simulation. However, it is hard to conclude that TRANSIMS is applicable to Korean roadway environment with studying particular target area. Therefore, additional studies; such as more case studies with various types of road, signal, and land use, will be required to localize TRANSIMS to Korea.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.2
• /
• pp.107-113
• /
• 2011

This paper describes a development of a loop filter design in a physical modeling of the plucked string instrument. The conventional method proposed by V$\"{a}$lim$\"{a}$ki cannot estimate right parameters if a sound has either very short sustain or no sustain. In order to overcome this drawback, we propose the use of the decay region and 5 to 20 harmonics of the sound in the estimation of loop filter parameters. The most appropriate filter coefficient is chosen by frequency signal to noise ratio. To verify the performance of the proposed method, the guitar, gayageum and geomungo were selected as the target because they have different shape, structure, and material of strings. Regardless of the duration of harmonics, the proposed method was able to estimate the loop filter parameters representing frequency-dependent damping of harmonics.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.7
• /
• pp.327-332
• /
• 2016

This study is a leading research project to develop an automatic grade decision making algorithm of a 6-years-old fresh ginseng. For this work, we developed a Ginseng image acquiring instrument which can take 4-direction's images of a Ginseng at the same time and obtained 245 jingen images using the instrument. The 12 parameters were extracted for each image by a manual way. Lastly, 4 parameters were selected depending on a Ginseng grade classification criteria of KGC Ginseng research institute and a survey result which a distribution of averaging 12 parameters. A pattern recognition classifier was used as a support vector machine, designed to "k-class classifier" using the OpenCV library which is a open-source platform. We had been surveyed the algorithm performance(Correct Matching Ratio, False Acceptance Ratio, False Reject Ratio) when the training data number was controlled 10 to 20. The result of the correct matching ratio is 94% of the $1^{st}$ ginseng grade, 98% of the $2^{nd}$ ginseng grade, 90% of the $3^{rd}$ ginseng grade, overall, showed high recognition performance with all grades when the number of training data are 10.