• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1609-1610
• /
• 2015

국내 철도 변전소의 부하전력은 부하인 철도차량의 부하특성에 의해 고조파와 역률이 매우 좋지 못한 실정이다. 이러한 이유에서 철도변전소에는 고조파를 보상하기위한 고조파 저감설비와 역률을 개선시키기 위한 역률보상용 콘덴서와 같은 전력품질개선설비(FACTs) 들이 설치되고 있다. 본 논문에서는 이러한 철도차량 부하의 차량별 고조파 특성을 살펴보고, 이를 효과적으로 제어할 수 있는 방법을 제안하였다. 제안된 알고리즘은 고조파저감설비의 위상제어를 통한 역률 향상을 도모하기 위한 것으로 일반적인 밴드패스 필터를 사용한 고조파 전류성분 검출에 따른 제어방식과 달리 고조파 전류에 대한 Lyapunov 안정도에 기반을 둔 제어방식을 적용하여 빠른 전류제어 동특성을 같도록 제안하였고 시뮬레이션과 실 부하 계통에 설치하여 운용함으로 그 타당성을 입증하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.2
• /
• pp.127-135
• /
• 2009

Reid and Kajiura(1957) has studied on the wave damping rate over a permeable bed of infinite depth. In this study, wave damping rate over a permeable bed of finite depth is derived by linear wave theory. It is then extended to derive wave damping rates over a double or triple layer, each of which consist of different material. Applying the wave damping rate to the mild slope equation, the wave transmission coefficient over a permeable bed has been calculated. The model has been certificated by comparing with the result of Flaten and Rygg(1991)'s integral equation method in the case of a single-layer bed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.2
• /
• pp.110-115
• /
• 2000

The electromechanical reciprocity identity is introduced to relate the voltage at the terminals of a transducer to the acoustic wavefields scattered from the specimen. The voltage at the terminals of the transducer is expressed as an integral equation in terms of the displacement and stress of the incident and scattered waves on the closed surface enclosing the scatterer. The equation is used to relate the voltage at the terminals of an acoustic microscope's transducer to the acoustic wavefields at the interface between the specimen and the coupling fluid. The voltage calculated using the integral equation is compared with the experimental result.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.6
• /
• pp.586-595
• /
• 2007

The analytic solution of wave scattering of monochromatic waves on a pile breakwater by an eigenfunction expansion method is extended to the case of directional irregular waves. The scattering wave spectrum and the force spectrum can be expressed from the reflection coefficient, transmission coefficient and the wave forces obtained from changing frequencies and incident angles in monochromatic waves. By numerical integration of 2-dimensional spectrum which is function of frequencies and incident angles, the representative values for the scattered waves and wave forces are obtained and the dependence of the transmission coefficients and wave forces on the directional distribution function, the principal wave direction, the submergence depth, and porosity is analyzed.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.145-152
• /
• 1996

In this study, the technique to evaluate the extreme design wave height of certain return period is developed from the given measured or hindcasted sea state data of concerned area for limited period. By using the order statistics and Monte Carlo Simulation method, the best fit probability distribution function with proper parameters describing the given wave height data is chosen, from which extreme design wave height can be predicted by extrapolation to the desired return period. The fitness and the confidence limit of the chosen probability function are also discussed. Application calculation is carried out for the wave height data given by applying the Wilson wave model theory to major 50 typhoon wind data affecting Korean South coast during the year from 1938 to 1987.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.2
• /
• pp.157-163
• /
• 1994

An experimental study of deep-water breaking waves is performed by nonlinear wave evolution as well as superposition of different wave frequencies. Two-dimensional and three-dimensional wave instabilities and breakings are observed in nonlinear wave evolution. The wave energy evolves with almost the same initial wave energy before breaking but decreases significantly after breaking process. Large spilling and plunging waves are generated near e expected breaking location by means of faster waves overtaking slow waves at a certain point. More energy loss in vigorous plunging breakers is observed through breaking process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.103-111
• /
• 2003

With the proliferation of nonlinear loads such as personal computer in an educational building, high neutral harmonic currents have been observed. High neutral currents in three-phase four ire distribution power systems can cause tots of harmonic problems such as overloaded neutral conductors and malfunction of protective equipment. On-site measurements of harmonic currents and voltages were made and the corresponding equivalent circuits was developed. The circuit model under study was simulated numerically and graphically through the use of the software MATLAB. Simulation results verifying the effect of a single-tuned passive filter for the neutral harmonic current reduction are presented.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.33-38
• /
• 2008

The baseline wander of ECG makes difficult to detect P-, Q-, R- and S-wave. This paper presents and compares two method to remove the baseline wander of ECG using slope traceing waves. For the first method that had been proposed already[1], the ascending slope tracing method is used to eliminate baseline wander. And the second method employs the contour of the approximated S-wave to remove baseline wander. These two methods are common to use the slope tracing wave. However, the first one is to get difference signals between the ascending tracing waves and ECG signals, and the other is to remove baseline wander using the contour of the approximated S-wave obtained from descending slope waves. To evaluate these methods, we apply to MIT/BIH database.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.95-102
• /
• 2008

Typical household loads have nonlinear loads including a personal computer, video, refrigerator, microwave oven, TV, and audio set. These nonlinear loads generate harmonic currents and create distortions on the sinusoidal voltage of the power system. Harmonic field measurements have shown that the harmonic contents of a waveform varies with time. A cumulative probablistic approach is the most commonly used method to solve time varying harmonics. This paper provides in depth analysis on harmonics field measurement of the typical household loads for one year period and the survey is conducted with the objectives to identify the trends of harmonic distortion level present and indentify the future trends of metering in the presence of nonsinusoidal current and voltage waveforms in the system.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.467-468
• /
• 2015

능동형필터는 주로 비선형 부하로 부터 발생되는 정수배의 고조파를 보상하는데 응용되어 왔다. 본 논문에서는 국가핵융합연구소(NFRI)의 KSTAR 주장치의 전원공급장치인 PF MPS가 가동되면서 특이한 저차수 대역의 비정수 고조파가 발생되는데 이는 MG(motor generator)와 RPC (Reactive Power Compensator)간의 병렬공진 확대현상으로 나타나 고조파 전류의 증가, 전압왜형 상승 등 안정적인 전력계통 운영에 영향을 주고 있다. 따라서 이의 원인이 되는 특이성의 비정수 고조파를 저감시키기 위한 제어 알고리즘 개발과 모의시험에 관한 연구내용을 다루고자한다. 지금까지 개발된 알고리즘은 주로 정수배 고조파만을 대상으로 한 FFT의 일괄보상, 혹은 개별차수 보상방식이었으나 여기서는 DQ 변환 알고리즘을 채용하여 정수배 고조파는 물론 0.5차 단위의 비정수 고조파까지 제어하는 기술을 다루었다.