• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.24001-24056
• /
• 2004

암반 기초에서 발생 가능한 파괴형태로는 $\circled1$전단파괴(Shear failure) $\circled2$관입파괴(punch failure) $\circled3$붕락(Collapse) $\circled4$균열파괴 (cracking) $\circled5$분쇄상파괴 (crushing) $\circled6$쐐기상파괴 (wedging)를 들 수 있다. 그림 2.4-1에서 (a)는 연암층 내에서의 전형적인 전단파괴를 나타내고, (b)는 소성암반 상부에 강성암반이 놓였을 때의 전단파괴를 보여준다. (c)는 2층으로 구성된 지반에서의 전단파괴 양상이며, (d)는 편심하중이 작용할 때의 전단파괴이다. (e)는 사면 상에서의 활동에 의한 파괴유형이다. (f)는 절리가 발달한 풍화된 암반내로 진행되는 관입파괴를 보여주고 있다. (e)는 연암지반 내부로 강성암반이 관입되어 파괴된 모습이다. (h)는 풍화된 화강암에서의 관입파괴 유형이다. (i)는 석회암층 내부의 지하공동에 의한 붕락현상을 보여주고 있으며, (j)는 지하수의 유동에 의해 형성된 공동으로 인한 붕락파괴를 나타낸다. (k)는 균열파괴, (l)은 분쇄상 파괴, (m) 쐐기상 파괴, (n)은 단층선을 따른 파괴 유형이다. (중략)

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.7
• /
• pp.167-177
• /
• 2009

This study investigates a failure mechanism of a tunnel shotcrete lining with respect to a concentrated load due to blocky rock mass. First of all, it is carried out to survey relevant researches to shotcrete failures by literature reviews and to numerically re-investigate the failure modes of shotcrete lining given by previous researches. Through this study, the failure modes are relocated with the conditions which induce each failure mode newly proposed by this study. In addition to this, the arching shape of tunnel lining, which has not been considered in the previous research despite of inherent geometrical characteristics in tunnels, is taken into consideration in numerical investigation on lining failure in this study. As a result, it is shown that more simplified failure modes can be found on the tunnel boundary condition and the corresponding failure condition to each mode can be different from ones of the previous study due to a tunnel arching effect.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.3 no.3
• /
• pp.33-44
• /
• 1999

An energy balance procedure is developed to incorporate the effects of earthquake duration which involves the effect of cyclic loading and the corresponding cumulative plastic deformation. Particular emphasis is given to the flexural failure of non-seismically designed columns of reinforced concrete frames. For this, conceptual strength deterioration models for columns, governed by concrete, anchorage failure and longitudinal steel fracture due to low-cycle fatigue, are proposed. It is evident that the energy-based method has good agreement with the experimental data and is able to predict the failure mode.

• Proceedings of the KSEG Conference
• /
• 2004.03a
• /
• pp.22001-22109
• /
• 2004

사면 파괴의 분류에 대하여는 여러 학자들(Hutchinson, 1968; Varnes, 1978; Hoek and Bray, 1981)에 의하여 시도되어 왔으며, 일반적으로 파괴면의 기하학적 형상, 물질의 이동 형태와 이동 물질의 종류 등에 따라 분류한다. 현재 널리 사용되는 사면 파괴에 대한 분류로는 Varnes(1978)와 Hoek and Bray(1981)의 분류법이다. 이외 일본 지반 공학회에서는 파괴 두께와 관련된 사면 붕괴 유형을 구분하였다. 여기서는 각각의 분류에 대해 기술하고, 일반적으로 암반 사면에 대한 붕괴 유형 분류를 제시한다. (중략)

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.5
• /
• pp.26-34
• /
• 2016

The failure modes of steel column-base plate connection arranged on the basis of AISC Design Guide-#1 and -#10 are base plate tension and compression side flexural yielding, yielding, pull-out and shear failure of anchor rod, concrete crushing in concrete footing and steel column yielding. The bending moment capacity and failure mode in this connection are predicted using limit-state function and we compare these results and test result. In the case that thickness of base plate is relatively thick, bending moment capacity and failure mode in steel column-base plate connection accurately predicted. But in the case that thickness of base plate is relatively thin and axial force do not exist, prediction of failure mode in this connection is somewhat inaccurate.

• Geotechnical Engineering
• /
• v.2 no.3
• /
• pp.67-78
• /
• 1986

This paper presents how to determine the system reliability of a typical shallow foundation constituted four potential correlated failure modes of hearing capacity (BCM), consolidation settlement (CSM), moment (MFM), and tension shear (PCM). Through the idenfication of the distinct and different modes and evaluation of range of system reliability, the obtained conclusions are as follows; 1. The CSM and the PCM are the lowest and highest of reliability indices of single performance function, and the BCM and the MFM are medium of them. 2. For the correlated failure modes, the hi-modal bounds Is narrower and lower of failure probability than the unimodal bounds. Not to be overestimated, therefore, the system reliability should be based on the second-order bounds using correlated performance functions.

• Geotechnical Engineering
• /
• v.12 no.6
• /
• pp.37-50
• /
• 1996

In this study, we collected data through the investigation of rock slopes of highway. By analyzing the collected data, the main factors of rock slope failure were studied. We studied on the failure types and scales according to rock types and geological structures in many rock slopes of highway. As a result, it was shown that many failed slopes were distributed in the areas of Cretaceous sedimentary rocks of south-eastern part in the Korean Peninsula and the Gneiss Complex in both Kyonggi-Do and Kangwon-Do. According to rock types, the following slope failure types were shown : that igneous rocks had the types of rock fall, plane failure, soil erosion and circular failure but had low failure frequency, and sedimentary rocks had predominantly the type of plane failure. Metamorphic rock showed the types of circular failure, wedge failure and plane failure due to poor rock qualities . According to geological structures, the following slope failure types were shown slope failure in igneous rocks was caused by joints, and in sedimentary rocks by bedding plane, and in metamorphic rocks by faults and poor rock qualities.

• Review of KIISC
• /
• v.26 no.5
• /
• pp.32-36
• /
• 2016

저장장치 파괴가 피해 효과를 가장 극명하게 보여줄 수 있다는 점 때문에 최근 침해사고에서 자주 사용된다. 저장장치 파괴는 공격 목적을 모두 달성한 후 마지막 수단으로 사용되기도 하지만 공격의 목적 자체인 경우도 종종 있다. 침해사고에서는 주로 저장장치 전체를 파괴하기 보다는 짧은 시간에 파괴 효과를 극대화할 수 있도록 파일시스템의 주요 데이터 구조를 파괴한다. 본 논문에서는 윈도우 운영체제 환경을 대상으로 악성코드에 의해 파괴된 저장장치 유형을 소개하고 복구 방안을 기술한다.

• Korean Journal of Materials Research
• /
• v.8 no.11
• /
• pp.982-986
• /
• 1998

baking 전후의 금선의 접합강도 변화를 연구하였다. 금선을 이용하여 Si 칩의 AI 패드와 은도금된 리드프레임 사이를 thermosonic 방법으로 본딩하였다. 본딩된 금선을 $175^{\circ}C$에서 시간을 변화시키면서 baking 처리하였다. 접합강도는 와이어 풀 테스트, 볼 전단 테스트, stud 풀 테스트로 평가하였다. 와이어 풀 접합강도는 baking 처리를 거쳐도 크게 변화하지 않았지만 파괴 유형이 baking 전에는 볼목 파괴에서 baking 후 스티치 파괴로 바뀌었다. 본딩과 baking 중 금선의 결정립이 크게 성장하였는데 이런 결정립 크기 변화와 금선 접합 부위의 기하학적인 모양에 따라 파괴 유형이 바뀌었다.

• Journal of Korea Water Resources Association
• /
• v.43 no.11
• /
• pp.967-976
• /
• 2010

AFDA (Approximate Full Distribution Approach) model of FORM (First-Order Reliability Model) which can quantitatively calculate the probability that storm sewer reach to performance limit state was developed in this study. It was defined as a failure if amount of inflow exceed the capacity of storm sewer. Manning's equation and rational equation were used to determine the capacity and inflow of reliability function. Furthermore, statistical characteristics and distribution for the random variables were analyzed as a reliability analysis. It was found that the statistical distribution for annual maximum rainfall intensity of 10 cities in Korea is matched well with Gumbel distribution. Reliability model developed in this study was applied to Y shaped storm sewer system to calculate the probability that storm sewer may exceed the performance limit state. Probability of failure according to diameter was calculated using Manning's equation. Especially, probability of failure of storm sewer in Mungyeong and Daejeon was calculated using rainfall intensity of 50-year return period. It was found that probability of failure can be significantly increased if diameter is decreased below the original diameter. Therefore, cleaning the debris in sewer pipes to maintain the original pipe diameter should be one of the best ways to reduce the probability of failure of storm sewer. In sewer system, two sewer pipes can flow into one sewer pipe. For this case, probability of system failure was calculated using multiple failure mode. Reliability model developed in this study can be applied to design, maintenance, management, and control of storm sewer system.