• Economic and Environmental Geology
• /
• v.20 no.1
• /
• pp.35-60
• /
• 1987

The geochemical characteristics including minerals, major and trace elements chemistries of the Proterozoic, Jurassic and Cretaceous granites in Korea are systematically summarized and intended to decipher the origin and crystallization process in connection with the tectonic evolution. The granites in Korea are classified into three different ages of the granites with their own distinctive geochemical patterns: 1) Proterozoic granitoids; 2) Jurassic granites(cratonic and mobile belt); 3) Cretaceous-Tertiary granites. The Proterozoic granite gneisses (I-type and ilmenite-series) formed by metamorphism of the geochemically evolved granite protolith. The Proterozoic granites (S-type and ilmenite-series) produced by remobilization of sialic crust. The Jurassic granites (S-type and ilmenite-series) were mainly formed by partial melting of crustal materials, possibly metasedimentary rocks. The Cretaceous granites (I-type and magnetite-series) formed by fractional crystallization of parental magmas from the igneous protolith in the lower crust or upper mantle. The low temperature ($315{\sim}430^{\circ}C$) and small temperature variations (${\pm}20{\sim}30^{\circ}C$) in the cessation of exsolution of perthites for the Proterozoic and Jurassic granites might have been caused by slow cooling of the granites under regional metamorphic regime. The high ($520^{\circ}C$) and large temperature variations (${\pm}110^{\circ}C$) of perthites for the Cretaceous granites postulate that the rapid cooling of the granitic magma. In terms of the oxygen fugacity during the feldspar crystallization in the granite magmas, the Jurassic mobile belt granites were crystallized in the lowest oxygen fugacity condition among the Korean granites, whereas the Cretaceous granites in the Gyeongsang basin at the high oxygen fugacity condition. The Jurassic mobile belt granites are located at the Ogcheon Fold Belt, resulting by closing-collision situation such as compressional tectonic setting, and emplaced into a Kata-Mesozonal ductile crust. The Jurassic cratonic granites might be more evolved either during intrusion through thick crust or owing to lower degree of partial melting in comparison with the mobile belt granites. The Cretaceous granites are possibly comparable with a continental margin of Andinotype. Subduction of the Kula-Pacific ridge provided sufficient heat and water to trigger remelting at various subcrustal and lower crustal igneous protoliths.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.627-648
• /
• 2001

At least two distinct types of layering are present in the middle zone of the Skaergaard intrusion; alternating plagioclase-rich and pyroxene-rich, macro-rhythmic layers, and smaller scale, modally-graded, rhythmic layers. The macro-rhythmic layers are ubiquitous in the middle zone of the Layered Series, but are not observed in the lower and upper zone of the Layered Series or in the wall or roof tories of the intrusion. They range from 0.3 to 17.3 m in thickness, have sharp upper and lower boundaries, and can be traced laterally for over 2 ]fm in outcrop. Although individual macrorhythmic layers are not internally graded, many contain smaller-scale, modally-graded layers. Modally-graded. rhythmic layers are a common feature of the Layered Series but are not abundant in either the Upper Border Series or the Marginal Border Series. They range in thickness from 1 to 50 cm and can be traced laterally in outcrop for up to 100 m. Their lateral termination ranges from abrupt to gradational, and they are often associated with cut and fill structures and crossbedding suggestive of current activity. They are characterized by sharp lower and gradational upper contacts, and by strong intra-layer modal grading with olivine, ilmenite, and magnetite concentrated at the base, pyroxene concentrated above the base, and plagioclase concentrated at the top. The layers are also grain-size graded with the maximum size for each phase occurring at the horizon in the layer where the phase is most abundant. Modally-graded, rhythmic layers in the middle zone of the Layered Series occur within both plagioclase-rich and pyroxene-rich macro-rhythmic layers.

• Economic and Environmental Geology
• /
• v.47 no.6
• /
• pp.571-588
• /
• 2014

It consists of the Precambrian Jirisan metamorphic complex and Sancheong anorthosite complex and the Mesozoic granitoids which intrude them in the Sancheong area, the Jirisan province of Yeongnam massif, Korea. The study area is located in the western part of the stock-type Sancheong anorthosite complex. We performed a detailed fieldwork on the Sancheong anorthosite (SA) and Fe-Ti ore body (FTO) which constitute the Sancheong anorthosite complex, and reinterpreted the origin of FTO foliation and the genetic relationship between them from the foliations, shear zones, occurrences of the SA and FTO. The new structural characteristics between them are as follows: the multilayer structures of FTO, the derived veins of straight, anastomosing uneven types and block structures related to the size reduction of SA, the gradual or irregular boundaries of SA blocks and FTO showing bulbous lobate margins and comb structures, the FTO foliation and linear arrangements of flow occurrence which is not ductile shear deformation, the discontinuous shear zone of SA, the orientation of FTO foliations parallel to the boundaries of SA blocks, the predominance of FTO foliations toward the boundaries of SA blocks and being proportional to the aspect ratio of plagioclase xenocrysts and SA xenoblocks, and the flow folding structures of FTO foliation. Such field evidences indicate that the SA is not fully congealed when the FTO is melt and the fracturing of partly congealed SA causes the derived veins of FTO and the size reduction of SA. Also the gradual or irregular boundaries of SA blocks and FTO result from the mutual reaction between the not fully congealed SA blocks and the FTO melt, and the FTO foliation is a magmatic foliation which was formed by the interaction between the FTO melt and the partly congealed SA blocks. Therefore, these suggest that the SA and FTO are not formed from the intrusion of different magmas in genesis and age but from a coeval and cogenetic magma through multiple fractionation. We predict that the FTO will show an very irregular occurrence injected along irregular fractures, not the regular occurrence like as the intrusive vein and dike. It can be applied to the designing of Fe-Ti mineral resource exploration in this area.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.553-562
• /
• 2000

Daejeonsa basalt in the Mt. Juwang area is composed of 12 lava flows alternate with 9 peperites, and each lava and peperite has variable thickness. Globular peperites yielded in Daejeonsa basalt are mixed basalt clasts with reddish shale. Based on field description, when lava flows over unconsolidated wet shale or injectes into unconsolidated wet shale, peperites were formed at the contacts between lava and shale. Daejeonsa basalt are massive lava flows with rare vesicules: some vesicules are found in upper part of a flow unit. The basalt has mainly pseudomorphs of olivine as phenocryst, and also plagioclase and clinopyroxene phenocrysts in rocks with higher Mg-number. Matrix is mainly subophitic texture, sometimes showing ophitic and intergranular textures due to different cooling rate. Clinopyroxene is augite(Wo$_{41.6}$En$_{45.1}$Fs$_{13.3}$), and plagioclase is mostly labradorite(An$_{55.0}{\sim}_{67.7}$), but some is andesine(An$_{44.3}$) and bytownite(An$_{74.5}$). Oxide minerals are composed of titanomagnetite and ilmenite.

• Economic and Environmental Geology
• /
• v.50 no.2
• /
• pp.105-116
• /
• 2017

The purpose of this study is to provide the information on genesis of obsidian occurring in the southwestern part of Ulleung Island, Korea, and to discuss its implications for volcanic activity through volcanological and mineralogical properties of obsidian. Obsidian occurs locally at the lower part of the Gombawi welded tuff, showing various complex textures and flow banding. Though obsidian is mostly homogeneous, it is closely associated with alkali feldspar phenocrysts, reddish tuff, and greyish trachyte fragments. The obsidian occurs as wavy, lenticular blocks or lamination composed of fragments. Cooling fractures developed on obsidian glass are characterized by perlitic cracks, orbicular or spherical cracks, indicating that obsidian rapidly quenched to form an amorphous silica-rich phase. It is evident that hydration took place preferentially at the outer rim relative to the core of obsidian, forming alteration rinds. The glassy matrix of obsidian includes euhedral alkali feldspars, diopside, biotite, ilmenite, and iron oxides. Microlites in glassy obsidian are composed mainly of alkali feldspars and ilmenite. Quantitative analysis by EPMA on the obsidian glass part shows trachytic composition with high iron content of 3 wt.%. Accordingly, obsidian formed with complex textures under a rapid cooling condition on surface ground, with slight rheomorphism. Such results might be induced by collapse of lava dome or caldera, which produced the block-and-ash flow deposit and the transportation into valley while keeping high temperatures.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.174-181
• /
• 1973

Dichlorodiacetatotitanium(IV) dissolves in alcohols with chemical reaction. Such solvolytic reaction of $TiCl_2(OAc)_2$with various alcohols has been studied by means of solution NMR spectroscopy and chemical analysis of the isolated products. The reaction of $TiCl_2(OAc)_2$ with primary alcohols has shown to be a quantitative two-step ligand substitution process as shown in the following: $TiCl_2(OAc)_2+ROH{\to}TiCl_2(OAc)_2(OR)+AcOH$ $TiCl_2(OAc)_2(OR)+ROH{\to}TiCl_2(OAc)_2+AcOH$The molecular form initially soluble in organic solvents has been found to be the monosubstituted species $TiCl_2(OAc)(OR)$. Alcoholysis with t-butyl alcohol has shown remarkable differences. When the mole ratio of t-butyl alcohol to $TiCl_2(OAc)_2$ is less than 1/2, the following reaction is dominant. $TiCl_2(OAc)_2+t-ButOH{\to}TiCl_2(OAc)_2+t-ButCl$However, at higher mole ratio another substitution process resembling the first step reaction with primary alcohols is competitively accompanied. The reaction with t-butyl alcohol also differs from that with primary alcohols in that only one either of the two chloro-or acetato-ligands in $TiCl_2(OAc)_2$ is subjected to substitution.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.197-207
• /
• 2013

Soil samples collected at the Kangwon and Donghae mines were investigated for the characterization of heavy metals using physicochemical and mineralogical properties. Arsenic (As) concentrations of soil samples sieved above 18 mesh and under 325 mesh at the Kangwon mine are 250.5 to 445.7 ppm, respectively. For soil samples sieved above 18 mesh at the Donghae mine, the concentrations of As, Pb, and Zn are 70.4, 1,055, and 781.9, while 117.7 ppm for As, 2,295 ppm for Pb, and 1,346 ppm for Zn are shown for the samples sieved under 325 mesh. XRD and SEM data indicated that the samples from the Kangwon mine included quartz, mica, albite, chlorite, magnetite, and amphibole while those from the Donghae mine contained quartz, mica, kaolinite, chlorite, amphibole, and rutile. SEM-EDS showed that magnetite found in the samples at the Kangwon mine was positively correlated with arsenic concentrations whereas ilmenite in the samples from the Donghae mine contained only small amount of As. Our results suggest that physicochemical and mineralogical characterization plays an important role in optimizing recovery treatments of soils contaminated in mine development areas.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.323-332
• /
• 1976

The x or $x^0+x'$ values of the nonstoichiometric chemical formula $TiO_{2-x}$ or $Ti_{2-(x^0+x')}$ have been measured by a specially made magnetic quartz microbalance in a temperature range from 600 to $1300^{\circ}C$ under oxygen pressures of $1{\times}10^{-6} to 1 atm. The standard x or $x^0$ value of the rutile is 0.00148. The x values $under_xoxygen$ pressure of 1 atm decrease with temperatures and then the stoichiometric rutile (or x = 0) is formed at $1130^{\circ}C$. The x values varied between 0.00148 and 0.01719 at a temperature range from 600 to $1300^{\circ}C$ under $1{\times}10^{-9}{\sim}1{\times}10^{-2}$ atm oxygen pressures. The enthalpies of formation of the nonstoichiometric rutile, $H_f$, varied between 21.05 and 29.97 Kcal/mole under the above conditions. The 1/n values calculated from the plots of log X' vs. log $Po_2$ are -{\frac{1}{2}}{\sim}-{\frac{1}{4}} under low oxygen pressure range of $1{\times}10^{-6}\;to\;1{\times}10^{-4}$ atm. Many physical properties of the titanium dioxide, such as the stability of the rutile, Electrical conductivity, catalytic activity and defects, can be explained through the x values and the thermodynamic data calculated from the temperature and oxygen pressure dependences of the x' values.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.5
• /
• pp.510-515
• /
• 1999

Synthesize of anatase type $TiO_2$ from $TiCl_4$ solution was studied. KOH was used on dehydration reaction of $TiCl_4$ solution. Products of dehydration reaction was calcined at 300, 500, 700, 900, $1000^{\circ}C$ during 1hour. Calcined products was studied by XRD, DTA, and FT-IR for effect of calcined temperature. The results are as follow. \circled1 Product pf dehydration reaction at$ 90^{\circ}C$ was semicrystalline anatase type $TiO_2$ because it has a peak vary broad and low at the position of anatase crysral XRD pattern. \circled2 Pure titanium oxide semi-crystalline products were produced at acid pH condition which convert to anatase crystal at $300^{\circ}C$ and to rutile crystal at $700^{\circ}C$. \circled3 The chemical composition of semicrystalline products which was produce at alkali pH conditions, were potasium titante. Potasium-titanate semi-crystalline products crystallized at 630~$640^{\circ}C$ \circled4 The transition temperature of potassium dopped titanium oxide semi-crystalline products was increased with the contents of potasium. \circled5 The optimum synthesise condition of anatase $TiO_2$ products from $TiCl_4$ and KOH are pH 3~5 and $300^{\circ}C$ calcination.

• The Journal of the Petrological Society of Korea
• /
• v.7 no.1
• /
• pp.37-52
• /
• 1998

The granites in the Jeomchon area can be divided into hornblende biotite granite (Hbgr), deformed biotite granite (Dbgr), deformed pinkish biotite granite(Dpbgr), biotite granite (Btgr), and granite porphyry(Gp). These granites show metaluminous, 1-type and calc-alkaine characteristics from their whole-rock chemistry. Hbgr and Dbgr belong to ilmenite-series granitoids, but Gp to magnetite-series. Dpbgr and Btgr show the intermediate nature between ilmenite- and magnetite-series. Tectonic discriminations indicate that Hbgr and Dbgr were formed in active continental margin environment, whereas Dpbgr, Btgr, and Gp in post-orogenic and/or anorogenic rift-related environment. From the Harker diagrams major oxide contents of Hbgr and Dbgr show a continuous variation with $SiO_2$, indicating that they are genetically correlated with each other. On the other hand, any correlation of major oxides variation cannot be recognized among Dpbgr, Btgr and Gp. It seems like that Hbgr and Dbgr were derived from a same parent granitic magma, judging from their occurrence of outcrop, mineral composition as well as whole-rock chemistry. Variation trends of major oxide contents between Hbgr and Baegnok granodiorite are very similar and continuous. If the two granites were derived from a cogenetic magma, there exists a possibility that the granitic bodies had been separated by Btgr and Gp of Cretaceous age. Three stages of the granitic intrusions are understood in the Jeomchon area. After the intrusion of Hbgr and Dbgr during middle to late Paleozoic time, Dpbgr emplaced into the area next, and finally Btgr and Gp intruded during Cretaceous time. Tectonic movement accompanying shear and/or thrust deformation seems likely to have occurred bewteen the intrusions of Dpbgr and Btgr.