• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.8
• /
• pp.775-782
• /
• 2012

To investigate pool boiling heat transfer in a vertical annulus with closed bottoms, the length of an outer tube was varied between 0.3 and 0.6 m. For the test, a heated tube of 0.2-m length and 19.1-mm diameter and water at atmospheric pressure were used. To elucidate the effects of the outer tube length on heat transfer, the results for the annulus were compared with data for a single unrestricted tube. The increase in the outer tube length resulted in an increase or decrease in heat transfer depending on the gap size. This tendency is mainly attributed to the difference in the intensity of liquid agitation.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.31-39
• /
• 2007

대금굴은 3년여 동안 암석 틈새를 들춰내며 150m쯤 물길을 찾아 들어가, 다시 18m의 수직동굴로 하강하여 좁은 틈새를 비집고 70m를 들어가는 악전고투의 탐사 끝에 2003년 동굴을 발견했다. 이렇게 3년여 동안 발굴된 대금굴은 또다시 4년여 동안의 모노레일 설치와 동굴내부 관람로 및 조명설치 등의 공사를 거쳐 2097년 6월 5일 일반 공개를 하였다. 총 길이 610m 중 4분의 3정도는 동굴 입구로 향하는 산길이고 나머지는 동굴 안쪽 길이다. 승강장에서 동굴 내부 140m에 설치된 "대금역"까지는 약 7분이 걸린다. 운전석이 없고 자동으로 운행하기 때문에 앞뒤로 동굴 안팎이 잘 보인다. 동굴 내부에 열차를 타고 들어가는 건 분명 이색체험이다. 그러나 모노레일 내부에 울리는 비발디의 "사계"라든지 동굴 벽에 붙여 놓은, 네온 빛에 가까운 퍼런 빛깔의 조명이 조용한 동굴 감상에 역효과가 초래될 수도 있다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.3
• /
• pp.237-244
• /
• 2011

An experimental study was carried out to investigate the effect of the inclination angle on the nucleate pool boiling of saturated water at atmospheric pressure. We considered an annulus with a gap of 5 mm and a bottom opening. The inner tube of the annulus was heated, and the outer diameter and the length of the tube were 25.4 mm and 500 mm, respectively. The inclination angle was varied from horizontal to vertical. The results were compared to those for an annulus with a larger gap and a single tube. In the small-gap annulus, the effect of the inclination angle on the heat transfer was not significant. However, an early onset of the critical heat flux was observed at 80 kW/$m^2$ when the annulus was horizontal. Liquid agitation and bubble coalescence were considered to be the major heat-transfer mechanisms.

• Vending industry
• /
• v.10 no.2 s.31
• /
• pp.48-49
• /
• 2011

회식의 즐거운 분위기는 가져가고 싶지만 냄새까지 가져가긴 싫어! 직장 생활 5년차 이대리(30.여)는 모처럼 고기로 포식한 회식자리를 가졌다. 분위기도 좋아 직장생활의 스트레스를 잠시나마 풀 수 있어 좋았지만 귀가길이 고민이다. 몸에 밴 고기 냄새 때문에 대중교통을 이용하기 꺼려지는 것. 지난번처럼 냄새 때문에 지하철 승객들이 힐끔 힐끔 쳐다보는 것을느끼면 다시는 고기집에서 회식을 안했으면 하는 생각이 절로 든다. 탈취용자판기는 냄새제거라는 틈새시장을 공략할 아이템이다. 이 제품에 대한 소비자들의 인식이 확대가 된다면 업소용 자판기로서 시장에 자리매김을 할 수 있을 것이다. '구슬이 서말여도 꾀어야 보배'란 말처럼 어떻게든 설치 로케이션을 늘려가며 이 제품의 호용가치를 인식시켜 가는 게 과제이다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.30 no.4
• /
• pp.195-203
• /
• 2018

Mohair is widely used as an airtight material for filling the gap between a window frame and sash. The purpose of this study is to investigate infiltration rate and opening force of sliding windows according to the mohair installation conditions. Infiltration experimental apparatus was set up, and the experimental results were applied to windows to find a correlation between infiltration rates and opening forces. When 4 rows of mohair were installed, the infiltration rate increase became 27.1% per clearance length increase of 1 mm, and the infiltration rate decrease became 5.7% per shortened length increase of 0.1 mm. For 4 rows of mohair, the opening force decreased by 28.2% as the clearance increased by 1 mm, and it increased by 9.3% as the shortened length increased by 0.1 mm.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.425-426
• /
• 2007

본 논문에서는 4 m 길이의 핵연료 집합체를 지지하는 스페이서 그리드 외관의 이상 상태를 자동으로 검출하기 위한 영상처리 알고리즘에 대해 기술한다. 원자로 가동 중에는 중성자 조사와 고온 고압 냉각수의 열 유동에 의한 물리적 작용으로 정방 격자구조로 되어 있는 연료봉이 늘어나거나 휘어져 연료봉 틈새 간격이 좁아지고 냉각수의 원활한 유동이 방해를 받게 됨에 따라 연료봉을 지지하는 스페이서 그리드의 변형이 초래될 수 있다. 스페이서 그리드 간격의 변화를 자동으로 추출하는 영상처리 알고리즘을 개발하여 스페이서 그리드의 이상 상태를 자동으로 인식할 수 있게 하였다. 실험 영상으로는 스웨덴 Ahlberg 사의 4면 검사장치에 의해 수행된 경수로형 핵연료 집합체의 검사 동영상을 이용하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.371-372
• /
• 2009

세포단위에서 혈관 생성과정 관찰 시 사용되는 광학현미경 영상은 광원의 특성으로 인해 부분적으로 영상이 밝거나 혹은 어둡게 나타난다. 이러한 현상은 혈관 영상에서의 혈관 분석을 어렵게 하므로 본 논문에서는 신 혈관 생성 영상에서 명도 불균형 문제를 해결하는 혈관 추출 및 정량화 기법을 제안한다. 불균형 명도 문제를 해결하기 위해 지역적 문턱치화 방법을 사용하고, 잡음 및 혈관 내 틈새 문제를 해결하기 위해 형태학적 연산 처리를 하였다. 그 결과 명도가 어두운 지역에서 배경 잡음이 없고, 영역이 끊어지지 않고 하나로 연결된 혈관을 추출할 수 있었다. 추출된 혈관 영역에서 골격화와 혈관 세그먼트에 기반하여 두께, 길이, 넓이를 정량화함으로써 혈관 분석 시 현미경에 탑재되어 있어 가장 널리 사용되고 있는 메타 모르프보다 정확한 정량화 결과를 얻었다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.251-259
• /
• 2006

In some cases, wooden structures are used for medium-rise buildings. It is therefore necessary to develop and test a new structural system for medium-rise buildings using wooden structures. This study deals with high-performance, laminated, timber-based composite members, which consist of structural laminated timber and H-beam. Simple beam tests were performed to determine the strength, stress distributions, and failure patterns of laminated timber. The main parameters are the insertinglength (1, 1.5, and 2 times the H-beam height) and the epoxy between the top/bottom flange of the H-beam and the top/bottom flange of the laminated timber. The results of the test show that the specimen with an inserting length that is 2 times the H-beam height was characterized by fairly god strength and stiffness.

• Composites Research
• /
• v.31 no.1
• /
• pp.12-16
• /
• 2018

Composite material and mold steel can be expanded differently with the temperature gradients during the forming process because their coefficients of thermal expansions are not the same. Therefore, in order to manufacture the product with accuracy, it is necessary to verify that the forming pressure on the surface of the composite material is maintained to the required level from the material supplier. In this paper, the pressure between the composite material and mold due to the temperature difference was predicted by finite element analysis and the accuracy of predicted value was verified by measuring the thermal expansions of mold steel by the ruler. The predicted value by finite element analysis is closely in agreement with one by the experiment within the required tolerance value of ${\pm}0.05mm$.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.