• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.1A
• /
• pp.74-84
• /
• 2008

UWB radio systems have drawn attention during the last few years. These systems are the core technique for ubiquitous home and enable to co-exist with other narrow band systems over the same frequency without interfering them. But UWB signals have a very low power per pulse, so they are affected by strong narrow band interferences. Specially, IEEE 802.11a systems which operate around 5GHz overlap the band of UWB signals and they will interfere with UWB systems significantly. In this paper, we propose a novel narrow band interference suppression method based on singular value decomposition(SVD) algorithm for DS-UWB in IEEE 802.15.4a channel model. The proposed method is very effective and robust for both a single user DS-UWB system and a multiuser DS-UWB system to reduce the narrow band interference.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.200-207
• /
• 2014

Arrhythmia electrocardiogram signal contains a specific unusual heartbeat with abnormal morphology. Because unusual heartbeat is useful for diagnosis and classification of various diseases, such as arrhythmia, detection of unusual heartbeat from the arrhythmic ECG signal is very important. Amplitude and kurtosis at R-peak point and RR interval are characteristics of ECG signal on R-wave. In this paper, we provide a method for detecting unusual heartbeat based on these. Through the value of the attribute deviates more from the average value if unusual heartbeat is more certainly, the proposed method detects unusual heartbeat in order using the mean and standard deviation. From 15 ECG signals of MIT-BIH arrhythmia database which has R-wave distortion, we compare the result of conventional method which uses the fixed threshold value and the result of proposed method. Throughout the experiment, the sensitivity is significantly increased to 97% from 50% using the proposed method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.50-55
• /
• 1995

진동하는 경계면의 진동장 및 음장을 재구성하기 위하여 음장측정치 및 경계요소법을 이용한 음향 홀로그래피 방법을 연구하였다. 특히, 측정잡음 및 전달행렬의 특이성에 의해 발생하는 재구성 오차에 대하여 고찰하였다. 재구성의 정확도를 나타내기 위하여 전달행렬의 특이인자를 도입하였다. 예제로 한면이 진동하는 직육면체 상자를 고려하였다. 결과로부터 매우 작은 측정잡음에 대해서도 전달행렬의 특이성 재구성 오차가 크게 발생하며, 측정위치에 따라 전달행렬의 특이성이 크게 영향 받음을 확인하였다. EfI방법을 이용하여 최적의 측정점을 선택한 결과 전달행렬의 특이성을 크게 줄일 수 있었으며 이때 측정점의 위치는 가진주파수에 관계없이 큰 음장이 형성되는 소음원의 근접장에 위치함을 알 수 있다. 또한 저주파 가진에 비해 고주파 가진이 작은 특이인자값을 나타내며, 따라서 재구성 오차가 작음을 알 수 있었다. 재구성장의 정밀도를 향상시키기 위하여, 부가적으로 진동장의 norm을 제한하는 적절화방법을 도입하였다. 모델의 최소자승오차를 최소화 하는 최적의 적절화변수를 추정하여 이로부터 재구성 오차를 줄일 수 있었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.89-101
• /
• 1995

선형 탄성 등방성 물체 내에 있는 일반적인 복합모드 크랙 문제들을 해석하기 위한 이중 경계적분방정식의 일반식과 계산해법이 제시되었다. 크랙면이 포함된 물체 해석에 있어서 유일한 해를 얻기 위하여, 한 면상의 점에는 변위 경계적분방정식이 적용되었고 마주하고 있는 상대면 상의 점에는 인력 경계적분방정식이 적용되었다. 인력 및 변위 경계적분방정식의 강특이해 및 초특이해 적분항들은 수치해법을 적용하기 전에 정상화되었다. 정상화과정 중 보정되는 강특이적분항이 상대 크랙면 상의 특이해 요소를 따라 직접 적분되는 것을 격리시키기 위하여, 특이해 적분 경로를 완만한 곡면으로 우회시킨 가상의 비특이해 보조경계로 대치하여 적분값을 계산하였다. 제시된 해법의 정확성과 효율성을 예시하기 위하여, 2차원 및 3차원 크랙 문제의 변형 후 모습과 응력강도계수 계산 결과를 보였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1282-1291
• /
• 2000

기존의 LQ-서보형 PI 설계방법은 보드선도 상에서 저주파와 고주파 영역에서의 루프전단함수의 특이값 일치에 기이한 설계상의 문제를 가지고 있다. 이러한 점을 해결하기 위해 역 최적제어와 볼록형 최적화기법에 기초한 새로운 설계 방법을 제안하고자 한다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.3
• /
• pp.283-286
• /
• 1995

자화도와 비저항의 온도에 따른 변화를 측정함으로써 덩치 가돌리늄의 큐리온도를 정확히 결정하였다. 이 두 물리량은 큐리온도에서 비정상적인 특이성을 보여준다. 이들의 특이성에서 결정된 큐리온도의 값은 서로 1도 이내에서 잘 일치함을 보여주었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.91-98
• /
• 2017

Electrical impedance tomography is a nondestructive imaging technique to reconstruct unknown conductivity distribution based on applied current data and measured voltage data through an array of electrodes attached on the periphery of a domain. In this paper, an inverse method based on truncated singular value decomposition is proposed to solve the inverse problem with the generalized Tikhonov regularization and to reconstruct the conductivity distribution. In order to reduce the inverse computational time, truncated singular value decomposition is applied to the inverse term after the generalized regularization matrix is taken out from the inverse matrix term. Numerical experiments and phantom experiments have been performed to verify the performance of the proposed method.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.163-173
• /
• 1999

Precise and reasonable modelling is necessary and indispensable to the analysis of dynamic characteristics of mechanical structures. Also. the effective prediction of the change of modal properties due to the variation of design parameters is required especially for the application of finite element method to the structural dynamics problems. To meet those necessity and requirement, three model updating algorithms are proposed for finite element methods. Those algorithms are based on sensitivity analysis of the modal data obtained from experimental modal analysis(EMA) and analytical modal analysis(AMA). The adapted sensitivity analysis methods of the algorithms are 1)eigensensitivity(EGNS) method. 2)frequency response function sensitivity(FRFS) method. 3)sensitivity based element-by-element method (SBEEM), Singular value decomposition(SVD) is used for performing eigenanalysis and parameter estimation in the updating process. Those algorithms are applied to finite element of a plate and the updating capability of each algorithm is compared in terms of accuracy. reliability and stability of the updating process. It is shown that the model updating method using frequency response function is superior to the other methods in view of various updating capabilities.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.139-148
• /
• 1999

In this paper, we designed the dental surgery system based on PC. This system predict post operated 3-dimensional image, So the patient has no need to take CT after surgery and expose his body to radiological damage. We predict the post operated skull from the patient's CT with pre and post cephalometry X-ray. Our novel procedures, to register X-ray and CT, are based on anatomical landmarks, singular value decomposition. And we display the predicted image 3-dimensionally by surface rendering. We verified this system by dry skull experiment and clinical experiment. When significance level is 0.05, there is on significance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.9
• /
• pp.1041-1043
• /
• 2016

This letter proposes a new blind fractionally spaced equalization (FSE). The conventional linear program (LP) FSE reduces the degree of freedom (DOF) by abandoning many equalization filter taps, which causes severe performance degradations. We use singular value decomposition (SVD) to obtain the signal subspace and to fully utilize all samples for performance improvement. The proposed scheme has similar performance with the nuclear norm minimization and has as low complexity as the LP equalizer.