• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.91-95
• /
• 1992

개영역(open boundary) 내의 변환기에 대한 음장 특성은 경계 조건이 좌표계와 정합되는 특수한 경우 헤름홀쯔 방정식풀이로 그렇지 않은 복잡한 형태의 음장에 대해서는 경계적분법이나 근사해법으로 얻어진다. 그러나 최근 이러한 문제들은 발달된 컴퓨터의 계산능력으로 유한요소법이나 경계요소법을 이용한 수치해법으로 해결되고 있다. 본 연구에서는 경계조건 변화에 따른 원통형 압전변환기의 방사임피던스 및 지향특성을 유한요소법 및 하이브리드형 무한요소법을 이용하여 구하고 기존의 해석적 결과와 비교하여 수중용 변환기 제작의 설계에 대한 기초자료를 제공하고자 한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.375-382
• /
• 2008

The particular integral formulation for two(2D) and three(3D) dimensional inelastic transient dynamic stress analysis is presented. The elastostatic equation is used for the complementary solution. Using the concept of global shape function, the particular integrals for displacement and traction rates are obtained to approximate acceleration of the inhomogeneous equation. The Houbolt time integration scheme is used for the time-marching process. The Newton-Raphson algorithm for plastic multiplier is used to solve the system equation. Numerical results of four example problems are given to demonstrate the validity and accuracy of the present formulation.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.195-202
• /
• 2012

This paper summarizes the seismic performance of two shear walls with different reinforcement details in boundary elements. One is a special shear wall designed by KBC2009 and the other is a shear wall with improved reinforcement details in boundary elements, which is a newly proposed type of special shear wall. Experimental tests under cyclic reversed loading were carried out with two 2/3 scale shear walls which were modelled from the lower part of seismic-resisting shear wall in 22-stories wall-slab apartment building. The experimental results show that seismic performance of shear wall with improved reinforcement details was almost similar to that of special shear wall with respect to the moment-drift ratio. However, energy dissipation capacity and ductility were slightly different. Also, shear wall with improved reinforcement details in boundary elements satisfied the inter-story drift limit of 1.5% from KBC2009.

• Land and Housing Review
• /
• v.6 no.1
• /
• pp.11-19
• /
• 2015

This paper presents experimental results on detailing of boundary element transverse reinforcement, proposed to alleviate placement detailing of special shear wall experiencing difficulty in construction at the sites due to recently reinforced seismic regulations, according to the type and placement interval of transverse reinforcement. As a result of experiment, crack and destruction aspects of SSWR series specimen that employed the proposed detailing of transverse reinforcement showed similar trend as SSW series specimen that used closed hoop. Predicted maximum strength values were exceeded. Also as a result of comparing energy dissipation ability, SSWR2 specimen that follows alleviated placement detailing was found to have similar seismic performance as special shear wall SSW2 specimen based on the existing design standard. As it satisfies the deformation angle condition of 1.5% provided in the design standard, SSWR2 can be used as the main lateral force resistance element in structures.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.20-23
• /
• 2001

This paper presents a novel design approach composed of two sequential processes for 3D magnetic shielding problems, which results in the global optimum solution in a shorter time. The feature of the proposed approach is the adoption of the specific boundary element with permeability of infinity. Assuming the permeability of infinity enables us to regard the thickness of ferromagnetic shields as infinitesimal, and thus to simplify the investigated model adequately in numerical analysis. This reduces the number of unknown variables and saves us a large amount of CPU-time for grasping the broad characteristics of the model. Some numerical results that demonstrate the validity of the proposed approach are also presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2019

The heat conduction problem with discontinuous material coefficients generally consists of the conservative equation, boundary condition, and interface condition, which should be additionally satisfied in the solution procedure. This feature often makes the development of new numerical schemes difficult as it induces a layered singularity in the solution fields; thus, a special approximation is required to capture the singular behavior. In addition to the approximation, the construction of a total system of equations is challenging. In this study, a wedge function is devised for enriching the approximation, and the interface condition itself is embedded in the moving least squares(MLS) derivative approximation to consistently satisfy the interface condition. The heat conduction problem is then discretized in a strong form using the developed derivative approximation, which is named as the interface immersed MLS difference method. This method is able to efficiently provide a numerical solution for such interface problems avoiding both numerical quadrature as well as extra difference equations related to the interface condition enforcement. Numerical experiments proved that the developed numerical method was highly accurate and computationally efficient at solving the heat conduction problem with interfacial jump as well as the problem with a geometrically induced interfacial singularity.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.3
• /
• pp.185-196
• /
• 1998

이 논문은 직사각형 단면을 갖는 철근콘크리트 보에서 휨전단균열(Flexural-Shear Crack)이 원인을 규명하기 위해 모두 16개의 보를 실험한 결과를 기술한 것이다. 실험에 이용된 콘크리트보는 전단균열에 영향을 준다고 생각되는 몇 가지 요소를 인위적으로 소거 도는 고립되도록 특수하게 제작된 것이다. 이러한 특수보의 실험결과를 같은 재원을 갖는 보통의 정상보의 결과와 직접 비교하여서 그 차이를 분석함으로써 휨전단 균열의 발생원인을 규명하였다. 그 결과, 일반적인 콘크리트보에서의 휨전단균열 발생은 철근과 콘크리트의 경계면의 부착현상과 매우 밀접한 관련이 있는 것으로 나타났다. 또한 발생된 휨전단균열의 안정성은 주철근을 따라 발생되는 수평균열의 크기에 직접적인 영향을 받고 있는 것으로 나타났다. 본 연구에서 나타난 몇 가지 사실은 현재 사용중인 전단설계규준의 근본을 이루는 전단 위험단면개념과는 상반되는 것도 있었다. 실험에서 알아낸 사실을 근거로 전단파괴기구에 대한 새로운 가설을 제안하였다. 이 새 가설은 지금까지 잘 설명되지 않은 휨전단균열의 발생과 진행에 대한 원인 및 과정을 상당히 잘 설명해주고 있다고 생각된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1741-1745
• /
• 2006

본 연구에서는 하천에 유입되는 오염물질 중 대부분을 차지하는 비보존성 오염물질의 확산거동을 예측하기 위해 2차원 수심평균된 이송분산방정식에 유한요소모형을 적용하였다. 수치모형 구성을 위해 Galerkin법을 이용한 가중잔차법을 사용하였으며, 복잡한 하천경계를 보다 정확히 재현할 수 있도록 삼각 및 사각요소망의 혼용이 가능하도록 하였다. 모의대상 수질인자는 BOD, DO, 질소화합물, 인화합물, 수온, pH 및 대장균군수이며, 이 가운데 BOD와 DO는 상호 쌍을 이루는 방정식을 풀어야 하는 특수한 형태이므로 별도로 취급하였다. 순간주입 및 연속주입에 의한 비보존성 오염물질의 확산거동을 모의하였으며, 시간에 따른 민감도를 분석하기 위해 보존성 오염물질의 확산거동과 비교하였다. 해석해를 이용해 순간주입된 오염물질의 오염운을 구하는 식을 유도하고 해석해와 본 연구에서 개발한 수치모형에 의한 수치해를 비교하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.45-56
• /
• 1994

A computationally efficient numerical method based on potential flow is developed for time-domain simulation of the nonlinear free-surface flows around a 2-dimensional hydrofoil. This numerical method, namely, spectral/boundary-element method, is a mixed one of the high-order spectral method and the boundary-element method in time-domain. The high-order spectral method is used to calculate the nonlinear evolution of free-surface, and the boundary-element method is used to calculate the effects of the hydrofoil and the shed vortex. As application examples, nonlinear free-surface flows around a 2-dimensional hydrofoil which starts from the rest and translates near the free-surface with or without harmonic oscillations are calculated. Nonlinear/unsteady results of free-surface waves and hydrodynamic farces are shown and discussed. Particularly, the results of steady-state which are obtained as a special case of the present unsteady solution are compared with others' calculated and experimental results, and good agreements are observed.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.213-223
• /
• 1997

Calculation of elastic wave fields has important applications in a variety of engineering fields including NDE (Non-destructive evaluation). Scattering problems have been investigated by numerous authors with different solution schemes. For simple geometries of the scatterers (e.g., cylinders or spheres), the analysis of steady-state elastic wave scattering has been carried out using analytical techniques. For arbitrary geometries and multiple inclusions, numerical methods have been developed. Special finite element methods, e.g., the infinite element method and a hybrid method called the Global-Local finite element method have also been developed for this purpose. Recently, the boundary integral equation method has been used successfully to solve scattering problems. In this paper, a volume integral equation method (VIEM) is proposed as a new numerical solution scheme for the solution of general elasto-dynamic problems in unbounded solids containing multiple inclusions and voids or cracks. A boundary integral equation method (BIEM) is also presented for elastic wave scattering problems. The relative advantage of the volume and boundary integral equation methods for solving scattering problems is discussed.